Plastic Film Capacitors NEW Safety standard approval Metallized Polypropylene Film Capacitor Class Y2/X1Class X1 ECQUB series Non-inductive construction using metallized polypropylene film. Flame-retardant plastic case and non-combustible resin. Features High safety (with safety function)Class X1 High moisture resistance 85, 85%, 275 V AC 500 h Flame-retardant plastic case and non-combustible resin RoHS compliant Recommended applications Interference suppressors for electronic equipment Explanation of part number Standard 1 2 3 4 5 6 7 8 9 10 11 12 E C Q U B A F Product code Dielectric & Rated voltage Capacitance Cap. Tol. Suffix construction Code Cap. Tol. Code Lead form K 10 Blank Straight M 20 A Cut lead Special lead space product 1 2 3 4 5 6 7 8 9 10 11 12 E C Q U B A F Product code Dielectric & Rated voltage Capacitance Suffix construction Cap. Tol. Code Lead form Length under crimping VBVH 10 4.0 mm VAVG 20 Crimped V5V6 10 lead 4.5 mm V1V2 20 Applicable standard It is certified as type ECQUB in the following approval. Approval Class Certification organization Class Y2 / X1 0.001 F to 0.0068 F UL UL60384-14 UL Class X1 0.01 F to 1.0 F Class Y2 / X1 0.001 F to 0.0068 F CSA CAN/CSA E60384-14 UL Class X1 0.01 F to 1.0 F Class Y2 / X1 0.001 F to 0.0068 F Europe EN60384-14 DEMKO Class X1 0.01 F to 1.0 F When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUB, 0.1 F. Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. According to standards for each region are based on IEC60384-14. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Jul-20Plastic Film Capacitors ECQUB series Specifications Category temp. range 40 to +110 300 V Rated voltage AC 300 V mentioned above refers to maximum voltage by fluctuating of nominal power supply voltage of 240 V. Capacitance range 0.001 F to 1.0 F0.001 F to 0.0068 F (E12), 0.01 F to 1.0 F (E6) Capacitance tolerance 10% (K), 20% (M) Dissipation factor (tan ) tan 0.1 % (20 , 1 kHz) C 0.0068 F : 1600 V AC , 2121 V DC , 60 s Between terminals 0.0068 F < C 1.0 F : 690 V AC , 1768 V DC , 60 s Withstand voltage 2100 V AC , 60 s Between terminals The capacitor shall be applied the voltage through a resistor of to enclosure 2 k or more when charge and discharge. C 0.33 F : 15000 M or more at 100 V DC Between terminals C > 0.33 F : 5000 MFor more at 100 V DC Insulation resistance (IR) C 0.47 F : 2000 M or more at 500 V DC 30000 M or more at 100 V DC Between terminals to enclosure 500 M at 500 V DC Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no influence on the reliability of the capacitor. Dimensions Cut lead Crimped lead Crimped lead Straight Suffix A Suffix VB, VH, VA,VG Suffix V5, V6, V1,V2 T0.5 L0.5 L0.5 L0.5 L0.5 Marking Marking Marking Marking F0.4 F0.4 d0.05 S0.8 S0.8 Tin-plated copper-clad steel wire +1.4 Q -0.6 A Marking example Style (A) side (B) side P(Lead location limits from center) B 300 V 15 X1 / Y2 1 ECQUB102 K 300 V X1 15 ECQUB103 K 2 Note : Only 10 as cap. tol. be marked as K Note: Date code. Unit : Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Jul-20 20 min. H0.5 4.00.5 H0.5 4.00.5 H0.5 5 max. H0.5 4.50.5 5 max.