Electric Double Layer Capacitors (Gold Capacitor)/ EN Surface Mount Type Series: EN Features Re- ow soldering method available (250 C) Miniaturized : Longer life and environmentally friendly RoHS directive compliant Recommended Applications Memory cards(power supply to hold memory), mobile phones, PDAs, digital cameras. Speci cations Category Temp. Range 10 C to +60 C Maximum Operating Voltage 3.3 V.DC Nominal Capacitance 0.2 F Maximum Operating Current 10 A max. Category temp. range (10 C) Capacitance change 30 % of initial measured value at +20 C Stability at low Internal resistance <10 times of initial measured value at +20 C temperature and high Category temp. range (+60 C) temperature Capacitance change 30 % of initial measured value at +20 C Internal resistance < measured value at +20 C After 500 hours application of 3.3 V. DC at +60 C, the capacitor shall meet the following limits. Endurance Capacitance change 30 % of initial measured value Internal resistance 4 k or less After 500 hours storage at +60C without load, the capacitor shall meet the following limits. Shelf Life Capacitance change 30 % of initial measured value Internal resistance 1 k ohm or less High temperature After 500 hours storage at +40 C, 90 to 95 % R.H., the capacitor shall meet the speci ed High humidity limits for shelf life. Di men sions in mm(not to scale) Type AK Type RK Type J2 0.90.3 0.150.05 6.8 max. 6.8 max. 1.40.2 + (0.10.3) 1.8 max. 0.90.3 6.8 max. + 0 5.0 0.2 0.150.03 + 2.380.35 1.90.2 0.50.1 0.50.1 01 F 23 1.8 max. 20.3 1.85 max. 0 5.0 0.2 Standard Products Maximum Capacitance Internal Min. Packaging Op er at ing Capacitance Mass resistance Qty range Part number Volt age (V.DC) (F) (F) ( ) at 1kHz (g) Reel (pcs) 3.3 0.2 0.16 to 0.36 < 200 0.2 (Approx.) EECEN0F204( ) 2000 The re- ow condition / taping dimensions are explained on p.197, 198 of our Catalog. Please use it as a reference guide. ( ) : Please use AK, RK or J2 to indicate terminal type. Note : 1. When the capacitor is being used in a high temperature and high humidity environment for a long period, brown deposited materials might be found around the sealing area. However, the materials are insulators and will not affect any electrical characteristics of the capacitor. 2. Do not use re ow soldering when cell voltage is above 0.3 V. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2008 11.30.3 5.90.1 2.50.3 1.40.3 2.00.3 6.8 max. 10.0 max. 0.20 max. 10.0 max. 2.60.3 1.90.4 +0.1 6.95 0.25 +0.1 0.15 0.2 (1.24) +X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for panasonic manufacturer: Other Similar products are found below : ECE-A1HKAR47 ELC-09D151F HC2-H-DC48V-F HL2-HP-AC120V-F HL2-H-DC12V-F HL2-HP-DC12V-F HL2-HP-DC6V-F HL2-HP- DC24V-F HL2-H-DC110V-F HC4-H-DC24V HL2-HTM-DC24V-F HL2-HTM-AC24V-F HC4-H-AC24V HC4-H-AC120V HC4-H-DC12V AZH2031 RP-SDMF64DA1 EVM-F6SA00B55 RP-SMLE08DA1 ERZ-V20R391 ELL-ATV681M LC-R121R3P ERZ-V05V680CB LT4H- DC24V LT4HL8-AC24V LT4HW-AC24V LT4HWT8-AC240V LT4HWT-AC240VS CY-122A-P ETQ-P5M470YFM EVAL PAN1555 EVQ-PAE04M EX-14B EX-22B-PN EX-31A-C5 EXB-24N121JX EX-F72-PN EX-L211 EYG-A121803V FCR-M50-AC208V FC-SFBH- 20 FC-SFBH-24 FD-F8Y MHMA102A1C MHMD022S1S MHMD041S1S MHMD042G1T MHMD082G1T FD-S9 FP0-LDR