EEE-FK1J220L Panasonic

Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FK series Features Country of origin Endurance105 2000 h to 5000 h Malaysia Low impedance40 % to 60 % less than FC series Miniaturized (30 % to 50 % less than FC series) AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 6.3 V to 100 V Capacitance range 4.7 F to 1500 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Characteristics Z (25 ) / Z (+20 ) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (40 ) / Z (+20 ) 3 3 3 3 3 3 3 3 3 at low temperature Z (55 ) / Z (+20 ) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 2 and then being stabilized at +20 , capacitors shall meet the following limits.(Suffix is 5000 h) Endurance Capacitance change Within 30 % of the initial value (Suffix G is 35 %) Dissipation factortan ) 200 % of the initial limit (Suffix G is 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10 % of the initial value soldering heat Dissipation factortan ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1 k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 Marking Dimensions Example : 50 V 10 F Marking color : BLACK A0.2 0.3 max. Negative polarity marking () Capacitance (F) Series identification 10 H FK Mark for Lead-Free L W products (Black dot) Pressure Relief (10 and larger) Reference size Rated voltage code Lot number Unitmm Size code D L A, B H I W P K R. voltage code UnitV +0.15 D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 j 6.3 H 50 0.20 +0.15 D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 A 10 J 63 0.20 +0.15 E 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 C 16 K 80 0.20 F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 E 25 2A 100 G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 V 35 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20 D0.5 H B0.2 H K I P IAluminum Electrolytic Capacitors (SMD Type) FK-HF series Characteristics list Endurance : 105 2000 h Min. Case size Specification Packaging (mm) Rated Capacitance Size Q ty (pcs) voltage Part number Reflow (20 %) *1 Ripple *3 code Impedance (V) *2 *4 (F) D L current tan Taping () (mA rms) 10 6.3 5.8 D 165 0.88 0.10 EEEFK1H100L (1) 1000 22 6.3 5.8 D 165 0.88 0.10 EEEFK1H220L (1) 1000 6.3 7.7 D8 195 0.68 0.10 EEEFK1H330XL (1) 900 33 8.0 6.2 E 195 0.68 0.10 EEEFK1H330L (2) 1000 50 6.3 7.7 D8 195 0.68 0.10 EEEFK1H470XL (1) 900 47 8.0 6.2 E 195 0.68 0.10 EEEFK1H470L (2) 1000 100 8.0 10.2 F 350 0.34 0.10 EEEFK1H101L (2) 500 150 10.0 10.2 G 670 0.18 0.10 EEEFK1H151L (2) 500 220 10.0 10.2 G 670 0.18 0.10 EEEFK1H221L (2) 500 10 6.3 5.8 D 80 1.50 0.08 EEEFK1J100L (1) 1000 6.3 7.7 D8 120 1.20 0.08 EEEFK1J220XL (1) 900 22 8.0 6.2 E 120 1.20 0.08 EEEFK1J220L (2) 1000 63 33 8.0 10.2 F 250 0.65 0.08 EEEFK1J330L (2) 500 47 8.0 10.2 F 250 0.65 0.08 EEEFK1J470L (2) 500 68 8.0 10.2 (F) 250 0.65 0.08 EEEFK1J680UL (2) 500 100 10.0 10.2 G 400 0.35 0.08 EEEFK1J101L (2) 500 4.7 6.3 5.8 D 40 3.00 0.08 EEEFK1K4R7L (1) 1000 6.3 7.7 D8 60 2.40 0.08 EEEFK1K100XL (1) 900 10 8.0 6.2 E 60 2.40 0.08 EEEFK1K100L (2) 1000 80 22 8.0 10.2 F 130 1.30 0.08 EEEFK1K220L (2) 500 33 8.0 10.2 F 130 1.30 0.08 EEEFK1K330L (2) 500 47 10.0 10.2 G 200 0.70 0.08 EEEFK1K470L (2) 500 22 8.0 10.2 F 130 1.30 0.07 EEEFK2A220L (2) 500 100 33 10.0 10.2 G 200 0.70 0.07 EEEFK2A330L (2) 500 Endurance : 105 5000 h Min. Case size Specification Packaging (mm) Rated Capacitance Size Q ty (pcs) voltage Part number Reflow (20 %) *1 Ripple code *3 Impedance (V) *2 *4 (F) D L current tan Taping () (mA rms) 470 8.0 10.2 F 600 0.16 0.26 EEEFK0J471GL (2) 500 6.3 1000 8.0 10.2 F 600 0.16 0.26 EEEFK0J102GL (2) 500 1500 10.0 10.2 G 850 0.08 0.26 EEEFK0J152GL (2) 500 330 8.0 10.2 F 600 0.16 0.19 EEEFK1A331GL (2) 500 470 8.0 10.2 F 600 0.16 0.19 EEEFK1A471GL (2) 500 10 680 8.0 10.2 F 600 0.16 0.19 EEEFK1A681GL (2) 500 1000 10.0 10.2 G 850 0.08 0.19 EEEFK1A102GL (2) 500 330 8.0 10.2 F 600 0.16 0.16 EEEFK1C331GL (2) 500 16 470 8.0 10.2 F 600 0.16 0.16 EEEFK1C471GL (2) 500 680 10.0 10.2 G 850 0.08 0.16 EEEFK1C681GL (2) 500 150 8.0 10.2 F 600 0.16 0.14 EEEFK1E151GL (2) 500 220 8.0 10.2 F 600 0.16 0.14 EEEFK1E221GL (2) 500 25 330 8.0 10.2 F 600 0.16 0.14 EEEFK1E331GL (2) 500 470 10.0 10.2 G 850 0.08 0.14 EEEFK1E471GL (2) 500 100 8.0 10.2 F 600 0.16 0.12 EEEFK1V101GL (2) 500 150 8.0 10.2 F 600 0.16 0.12 EEEFK1V151GL (2) 500 35 220 8.0 10.2 F 600 0.16 0.12 EEEFK1V221GL (2) 500 330 10.0 10.2 G 850 0.08 0.12 EEEFK1V331GL (2) 500 100 8.0 10.2 F 350 0.34 0.10 EEEFK1H101GL (2) 500 50 150 10.0 10.2 G 670 0.18 0.10 EEEFK1H151GL (2) 500 220 10.0 10.2 G 670 0.18 0.10 EEEFK1H221GL (2) 500 *1: Size code( ): Miniaturization product *2: Ripple current (100 kHz / +105 *3: Impedance (100 kHz / +20 ) *4: tan (120 Hz / +20 ) Please refer to the page ofReflow Profil andThe Taping Dimension. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20