Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Super low ESR GY series Features Super low ESR (3 m max.) Large capacitance (820 F max.) High ripple current (10200 mA rms max.) RoHS compliance, Halogen free Specifications Series GY Category temp. range 55 to +105 Rated voltage range 2.0 V to 2.5 V Rated cap. range 680 F to 820 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.1 CV (A) 2 minutes Dissipation factor (tan ) 0.06 (120 Hz / + 20 ) Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +105 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan ) 2 times of the initial limit DC leakage current 3 times of the initial limit +60 , 90 % RH, 500 h, No-applied voltage Capacitance change of 2.0 V to 2.5 V Damp heat initial measurd value +70 %, 20 % (Steady state) Dissipation factor (tan ) 2 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Polarity bar (Positive) Capacitance (F P P L W1 Lot No. R. voltage code R. voltage code Unit V Unit d 2.0 Series L0.2 W10.2 W20.1 H0.2 P0.3 e 2.5 GY 7.3 4.3 2.4 2.8 1.3 Externals of figure are the reference. Characteristics list Case size (mm) Specification Min. Rated Capacitance Packaging Ripple Series voltage *2 Part number ESR (F) *1 Qty L W H current (V) (m max.) (pcs) (mA rms) 2.0 820 7.3 4.3 2.8 10200 3 EEFGY0D821R 2000 GY 2.5 680 7.3 4.3 2.8 10200 3 EEFGY0E681R 2000 *1: Ripple current (100 kHz / +45 ) *2: ESR (100 kHz / +20 ) Please refer to each page in this catarog for Reflow conditions and Taping specifications. Temperature coefficient of ripple current Temperature T 45 45 < T 85 85 < T 105 2.0 V to 2.5 V Coefficient 1.0 0.7 0.25 Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Oct-19 W2 W2 HGuidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products typical operations and application circuits. We do not guarantee the non-infringement of third party s intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please selectSales Inquir in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21