Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Low ESR / Low ESL products LX series Features Large capacitance (560 F max.) Low ESR (4.5 m, 6 m max.) Low ESL (3-terminals : 50 % less than 2-terminals) High ripple current (8500 mA rms max.) RoHS compliance, Halogen free Specifications Series LX Category temp. range 55 to +105 Rated voltage range 2.0 V to 2.5 V Rated cap. range 330 F to 560 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.1 CV (A) 2 minutes Dissipation factor (tan ) 0.06 (120 Hz / + 20 ) Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +105 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan ) 2 times of the initial limit DC leakage current 3 times of the initial limit +60 , 90 % RH, 500 h, No-applied voltage 2.0 V to 2.5 V Capacitance change of Damp heat initial measurd value +70 %, 20 % (Steady state) Dissipation factor (tan ) 2 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Polarity bar (Positive) 3 terminals Capacitance (F L W1 P4 Lot No. R. voltage code P1 P3 P2 P1 Unit V Unit R. voltage code d 2.0 Series L0.2 W10.2 W20.1 H0.1 P10.3 P20.1 P30.2 P40.2 e 2.5 LX 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Nov-16 W2 W2 HLX series Characteristics list Case size (mm) Specification Min. Rated Packaging Capacitance Ripple Series voltage Part number *2 *3 (F) ESR Qty *1 (V) L W H current (m max.) (pcs) (mA rms) 7.3 4.3 1.9 7500 6 EEFLX0D331R 3500 330 7.3 4.3 1.9 8500 4.5 EEFLX0D331R4 3500 7.3 4.3 1.9 7500 6 EEFLX0D471R 3500 2.0 470 7.3 4.3 1.9 8500 4.5 EEFLX0D471R4 3500 7.3 4.3 1.9 7500 6 EEFLX0D561R 3500 LX 560 7.3 4.3 1.9 8500 4.5 EEFLX0D561R4 3500 7.3 4.3 1.9 7500 6 EEFLX0E331R 3500 330 7.3 4.3 1.9 8500 4.5 EEFLX0E331R4 3500 2.5 7.3 4.3 1.9 7500 6 EEFLX0E471R 3500 470 7.3 4.3 1.9 8500 4.5 EEFLX0E471R4 3500 *1: Ripple current (100 kHz / +45 ) *2: ESR (100 kHz / +20 ) *3: Please contact us when 500 pcs packing is necessary. Please refer to each page in this catarog for Reflow conditions and Taping specifications. Temperature coefficient of ripple current Temperature T 45 45 < T 85 85 < T 105 2.0 V to 2.5 V Coefficient 1.0 0.7 0.25 Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Nov-16