EEH-AZF1J330 Panasonic

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Radial Lead Type ZF-A series Hybrid Features Endurance : 1000 h at 150 (High temperature) High temperature compared with ZC series High-withstand voltage (to 63 V), Low LC (0.01 CV) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) Compatible with taping products for automatic insertion AEC-Q200 compliant RoHS compliant Specifications Size code F G Category temp. range 55 to +150 Rated voltage range 25 V to 63 V Nominal cap.range 33 F to 150 F 56 F to 270 F Capacitance tolerance 20 % (120 Hz / +20) DC leakage current I 0.01 CV (A) After 2 minutes Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +150 2 , 1000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after endurance F G ( / 100 kHz)(-40 0.4 0.3 After storage for 1000 hours at +150 2 with no voltage applied and then being Shelf life stabilized at +20 ,capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value Damp heat (Load) Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit DC leakage current Within the initial limit After flow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Shape/taping dimensions D0.5 6.351.0 12.71.0 1.0 1.0 Example : 25 V 150 F Taping type Marking color : BLACK F Negative polarity marking () P1 d0.05 Capacitance (F) 150 Series E ZF identification 4.00.2 12.70.2 d0.05 Rated voltage code Bulk type Lot number L1.0 14 min. 3 min. Pressure relief10 D0.5 R. voltage code UnitV Unitmm E 25 V 35 Size code D L d F P1 H 50 F 8.0 9.5 0.6 3.50.5 4.600.50 +0.8 J 63 G 10.0 9.5 0.6 5.0 3.850.50 -0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Sep-20 18.00.5 6.0 0 to 1.5 L1.0 0.60.3 9.00.5 +0.75 18.50 -0.50 F0.5Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZF-A series Characteristics list Endurance : 150 1000 h Min.packaging Case size Specification Part number (mm) q ty (pcs) Rated Capacitance Size voltage (20 %) Ripple *2 code ESR *1 *3 (V) D L d current Taping type Bulk type Taping Bulk (F) tan (m) (mA rms) 150 8.0 9.5 0.6 F 800 27 0.14 EEHAZF1E151B EEHAZF1E151 1000 200 25 270 10.0 9.5 0.6 G 1000 20 0.14 EEHAZF1E271B EEHAZF1E271 500 200 100 8.0 9.5 0.6 F 770 30 0.12 EEHAZF1V101B EEHAZF1V101 1000 200 35 150 10.0 9.5 0.6 G 950 23 0.12 EEHAZF1V151B EEHAZF1V151 500 200 56 8.0 9.5 0.6 F 700 35 0.10 EEHAZF1H560B EEHAZF1H560 1000 200 50 100 10.0 9.5 0.6 G 900 28 0.10 EEHAZF1H101B EEHAZF1H101 500 200 33 8.0 9.5 0.6 F 650 40 0.08 EEHAZF1J330B EEHAZF1J330 1000 200 63 56 10.0 9.5 0.6 G 840 30 0.08 EEHAZF1J560B EEHAZF1J560 500 200 *1: Ripple current (100 kHz/ +150 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Flow soldering profile and The taping dimensions. Frequency correction factor for ripple current Rated capacitance (C) Frequency (f) 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz C < 47 F 0.10 0.10 0.15 0.20 Correction 47 F C < 150 F 0.15 0.20 0.25 0.30 factor 150 F C 0.15 0.25 0.25 0.30 Rated capacitance (C) Frequency (f) 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz C < 47 F 0.30 0.40 0.45 0.50 Correction 47 F C < 150 F 0.40 0.45 0.55 0.60 factor 150 F C 0.45 0.50 0.60 0.65 Rated capacitance (C) Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz C < 47 F 0.60 0.65 0.70 0.75 Correction 47 F C < 150 F 0.70 0.75 0.80 0.80 factor 150 F C 0.75 0.80 0.85 0.85 Rated capacitance (C) Frequency (f) 40 kHz f < 50 kHz 50 kHz f < 100 kHz 100 kHz f < 500 kHz 500 kHz f C < 47 F 0.80 0.85 1.00 1.05 Correction 0.85 0.90 47 F C < 150 F 1.00 1.00 factor 150 F C 0.85 0.90 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Sep-20