Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZE series High temperature lead-free reflow Hybrid Features Endurance: 2000 h at 145 (High temperature / Long life) Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) High-withstand voltage ( to 63 V), Low LC (0.01 CV or 3 A) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) Vibration-proof product is available upon request. (8 mm and larger) AEC-Q200 compliant RoHS compliant Specifications Size code F G Category temp. range 55 to +145 Rated voltage range 25 V to 63 V Nominal cap.range 33 F to 220 F 56 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +145 2 , 2000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within 30% of the initial value Endurance 1 Dissipation factor (tan ) 200 % of the initial limit E.S.R. 200 % of the initial limit DC leakage current Within the initial limit +135 2 , 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within 30% of the initial value Endurance 2 Dissipation factor (tan ) 200 % of the initial limit E.S.R. 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +145 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance 1. (With voltage treatment) 85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value Damp heat Dissipation factor (tan ) 200 % of the initial limit (Load) E.S.R. 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V 220 F Standard Marking color : BLACK A0.2 0.3 max. Negative polarity marking () Unit Size H Capacitance (F) D L A, B I W P K code max. Series identification F 8.0 10.20.3 8.3 10 3.4 0.900.2 3.1 0.700.2 L G 10.0 10.20.3 10.3 12.0 3.5 0.900.2 4.6 0.700.2 W Pressure relief (10 ) ( ) Reference size 220 A0.2 F Vibration-proof product E ZE Rated voltage code T L W Lot number Supportive terminals Pressure relief (10 ) ( ) Reference size R. voltage code UnitV E 25 Unit H V 35 Size code D L A, B F I W P K R S T max. 8.0 10.50.3 8.3 10.0 0 to +0.15 3.4 1.20.2 3.1 0.700.2 0.700.2 5.3 1.30.2 H 50 F 10.0 10.50.3 10.3 12.0 0 to +0.15 3.5 1.20.2 4.6 0.700.2 0.700.2 6.9 1.30.2 J 63 G Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19 D0.5 H B0.2 D0.5 K (I) (P) (I) H B0.2 (S) R K (I) (P) (I)Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZE series Characteristics list Endurance 1 : 145 2000 h Endurance 2 : 135 4000 h Min. Case size Specification Part number (mm) packaging q ty Rated Capacitance *1 L Size Ripple current voltage (pcs) (20 %) *2 Standard Vibration-proof code (mA rms) ESR *3 (V) D (F) tan Vibration (m) product product Endurance 1 Endurance 2 Standard Taping -proof (+145 (+135 220 8.0 10.2 10.5 F 700 1600 27 0.14 EEHZE1E221P EEHZE1E221V 500 25 330 10.0 10.2 10.5 G 900 2000 20 0.14 EEHZE1E331P EEHZE1E331V 500 150 8.0 10.2 10.5 F 700 1600 27 0.12 EEHZE1V151P EEHZE1V151V 500 35 270 10.0 10.2 10.5 G 900 2000 20 0.12 EEHZE1V271P EEHZE1V271V 500 68 8.0 10.2 10.5 F 600 1250 30 0.10 EEHZE1H680P EEHZE1H680V 500 50 100 10.0 10.2 10.5 G 800 1600 28 0.10 EEHZE1H101P EEHZE1H101V 500 33 8.0 10.2 10.5 F 600 1100 40 0.08 EEHZE1J330P EEHZE1J330V 500 63 56 10.0 10.2 10.5 G 800 1400 30 0.08 EEHZE1J560P EEHZE1J560V 500 82 10.0 10.2 10.5 G 800 1400 30 0.08 EEHZE1J820P EEHZE1J820V 500 *1: Ripple current (100 kHz/ +145 or135 *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Reflow profile and The taping dimensions. The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitanceC Frequency (f) 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz C < 47 F 0.10 0.10 0.15 0.20 Correction 47 F C < 150 F 0.15 0.20 0.25 0.30 factor 150 F C 0.15 0.25 0.25 0.30 Rated capacitanceC Frequency (f) 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz C < 47 F 0.30 0.40 0.45 0.50 Correction 47 F C < 150 F 0.40 0.45 0.55 0.60 factor 150 F C 0.45 0.50 0.60 0.65 Rated capacitanceC Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz C < 47 F 0.60 0.65 0.70 0.75 Correction 47 F C < 150 F 0.70 0.75 0.80 0.80 factor 150 F C 0.75 0.80 0.85 0.85 Rated capacitanceC Frequency (f) 40 kHz f < 50 kHz 50 kHz f < 100 kHz 100 kHz f < 500 kHz 500 kHz f C < 47 F 0.80 0.85 1.00 1.05 Correction 47 F C < 150 F 0.85 0.90 1.00 1.00 factor 150 F C 0.85 0.90 1.00 1.00 After endurance ESR100 kHz-40 Size code F G ESR 0.4 0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19