Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZK series Hybrid High temperature lead-free reflow Features High capacitance and High ripple current compared with ZC series Endurance : 4000 h at 125 C (High temperature / Long life) Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or 3 A) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) Vibration-proof product is available upon request. New lineup of 6.3 product.6.3, 8, 10 AEC-Q200 compliant RoHS compliant Specifications Size code C D D8 F G Category temp. range 55 to +125 Rated voltage range 25 V to 35 V Nominal cap.range 33 F to 47 F 56 F to 82 F 100 F to 150 F 180 F to 270 F 330 F to 470 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +125 2 , 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after endurance C D D8 F G ( / 100 kHz)(-40 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +125 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value Damp heat (Load) Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 C, capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V 47 F Standard 0.3 max. A0.2 Unit Marking color : BLACK Size H D L A, B I W P K code max. +0.15 C 5.0 5.80.3 5.3 6.5 2.2 0.650.1 1.5 0.35 -0.20 +0.15 D 6.3 5.80.3 6.6 7.8 2.6 0.650.1 1.8 0.35 -0.20 Negative polarity marking () +0.15 D8 6.3 7.70.3 6.6 7.8 2.6 0.650.1 1.8 0.35 -0.20 L W Capacitance (F) 8.0 10.20.3 8.3 10 3.4 0.900.2 3.1 0.700.2 F Series identification Pressure relief (10 ) ( ) Reference size 10.0 10.20.3 10.3 12.0 3.5 0.900.2 4.6 0.700.2 G Vibration-proof product < Size codeD, D8 > < Size codeF, G > F A0.2 47 F A0.2 E ZK T T L W L W Rated voltage code Supportive terminals Pressure relief (10 ) ( ) Reference size Lot number Supportive terminals ( ) Reference size Unit H Size code D L A, B F I W P K R S T max. +0.15 6.3 6.10.3 6.6 7.8 0 to +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 D -0.20 +0.15 6.3 8.00.3 6.6 7.8 0 to +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 R. voltage code UnitV D8 -0.20 8.0 10.50.3 8.3 10.0 0 to +0.15 3.4 1.20.2 3.1 0.700.2 0.700.2 5.3 1.30.2 E 25 F V 35 G 10.0 10.50.3 10.3 12.0 0 to +0.15 3.5 1.20.2 4.6 0.700.2 0.700.2 6.9 1.30.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19 D0.5 D0.5 H H B0.2 B0.2 (S) K (I) (P) (I) R K (I) (P) (I) D0.5 H B0.2 (S) R K (I) (P) (I)Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZK series Characteristics list Endurance : 125 4000 h Min.packaging Case size Specification Part number (mm) q ty (pcs) Rated Capacitance L Size voltage Ripple (20 %) *2 Standard Vibration-proof code ESR *1 *3 (V) D Taping (F) current tan Vibration (m) product product Standard (mA rms) -proof 47 5.0 5.8 C 850 80 0.14 EEHZK1E470R 1000 68 6.3 5.8 6.1 D 1300 50 0.14 EEHZK1E680P EEHZK1E680V 1000 82 6.3 5.8 6.1 D 1300 50 0.14 EEHZK1E820P EEHZK1E820V 1000 25 150 6.3 7.7 8.0 D8 1800 30 0.14 EEHZK1E151XP EEHZK1E151XV 900 270 8.0 10.2 10.5 F 2000 27 0.14 EEHZK1E271P EEHZK1E271V 500 470 10.0 10.2 10.5 G 2800 20 0.14 EEHZK1E471P EEHZK1E471V 500 33 5.0 5.8 C 750 100 0.12 EEHZK1V330R 1000 56 6.3 5.8 6.1 D 1200 60 0.12 EEHZK1V560P EEHZK1V560V 1000 35 100 6.3 7.7 8.0 D8 1700 35 0.12 EEHZK1V101XP EEHZK1V101XV 900 180 8.0 10.2 10.5 F 2000 27 0.12 EEHZK1V181P EEHZK1V181V 500 330 10.0 10.2 10.5 G 2800 20 0.12 EEHZK1V331P EEHZK1V331V 500 *1: Ripple current (100 kHz/ +125 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Reflow profile and The taping dimensions. The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitanceC Frequency (f) 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz C < 47 F 0.15 0.20 0.25 0.35 Correction 47 F C < 100 F 0.15 0.25 0.30 0.40 factor 100 F C 0.15 0.25 0.30 0.40 Rated capacitanceC Frequency (f) 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz C < 47 F 0.45 0.55 0.60 0.65 Correction 47 F C < 100 F 0.50 0.60 0.65 0.70 factor 100 F C 0.50 0.60 0.65 0.70 Rated capacitanceC Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz C < 47 F 0.70 0.75 0.75 0.75 Correction 47 F C < 100 F 0.75 0.75 0.80 0.80 factor 100 F C 0.75 0.80 0.85 0.85 Rated capacitanceC Frequency (f) 40 kHz f < 50 kHz 50 kHz f < 100 kHz 100 kHz f < 500 kHz 500 kHz f C < 47 F 0.80 0.85 1.00 1.05 Correction 47 F C < 100 F 0.85 0.90 1.00 1.00 factor 100 F C 0.85 0.90 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19