Conductive Polymer Hybrid Aluminum UPDATE Electrolytic Capacitors Surface Mount Type ZS series Hybrid High temperature lead-free reflow Features Endurance: 4000 h at 135 High ripple current and High capacitance High-withstand voltage (to 63 V), Low leakage current (0.01 CV or 3 F) Vibration-proof product is available upon request. AEC-Q200 compliant RoHS compliant Specifications Size code G12 G16 Category temp. range 55 to +135 Rated voltage range 25 V to 63 V Nominal cap.range 100 F to 470 F 150 F to 560 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +125 2 , 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Endurance 1 Dissipation factor (tan ) 200 % of the initial limit E.S.R. 200 % of the initial limit DC leakage current Within the initial limit +135 2 , 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Endurance 2 Dissipation factor (tan ) 200 % of the initial limit E.S.R. 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +135 2 with no voltage applied and then being Shelf life stabilized at +20, capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied. Capacitance change Within 30% of the initial value Damp heat Dissipation factor (tan ) 200 % of the initial limit (Load) E.S.R. 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20, capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 35 V 470 F Standard Marking color : BLACK 0.3 max. A0.2 Negative polarity marking () Unit Capacitance (F) Size code D L A, B H I W P G12 10.0 12.5 10.3 11.00.2 3.2 1.20.2 4.6 Series identification G16 10.0 16.5 10.3 11.00.2 3.2 1.20.2 4.6 L0.3 W Pressure relief (10 ) ( ) Reference size 470 Vibration-proof product F A0.2 V ZS Rated voltage code T Lot number L0.3 W R. voltage code UnitV Supportive terminals ( ) Reference size Pressure relief (10 ) E 25 Unit V 35 Size code D L A, B H F I W P R S T 10.0 12.8 10.3 11.00.2 0 to +0.15 3.2 1.20.2 4.6 0.700.2 6.9 1.30.2 H 50 G12 0 to +0.15 J 63 G16 10.0 16.8 10.3 11.00.2 3.2 1.20.2 4.6 0.700.2 6.9 1.30.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 12-Nov-21 D0.5 H B0.2 (P) (I) (I) D0.5 H B0.2 (S) R (P) (I) (I)Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZS series Characteristics list Endurance 1 : 125 4000 h Endurance 2 : 135 4000 h Min. Case size Specification Part number (mm) packaging q ty Rated Capacitance *1 L Size Ripple current voltage (pcs) (20 %) *2 Standard Vibration-proof code (mA rms) ESR *3 (V) D (F) tan Vibration (m) product product Endurance 1 Endurance 2 Standard Taping -proof (+125 (+135 470 10.0 12.5 12.8 G12 3500 2500 14 0.14 EEHZS1E471P EEHZS1E471V 400 25 560 10.0 16.5 16.8 G16 4000 2900 11 0.14 EEHZS1E561P EEHZS1E561V 250 330 10.0 12.5 12.8 G12 3500 2500 14 0.12 EEHZS1V331P EEHZS1V331V 400 35 470 10.0 16.5 16.8 G16 4000 2900 11 0.12 EEHZS1V471P EEHZS1V471V 250 150 10.0 12.5 12.8 G12 3200 2250 17 0.10 EEHZS1H151P EEHZS1H151V 400 50 220 10.0 16.5 16.8 G16 3700 2600 13 0.10 EEHZS1H221P EEHZS1H221V 250 100 10.0 12.5 12.8 G12 3000 2100 19 0.08 EEHZS1J101P EEHZS1J101V 400 63 150 10.0 16.5 16.8 G16 3500 2400 15 0.08 EEHZS1J151P EEHZS1J151V 250 *1: Ripple current (100 kHz/ +125 or +135 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Reflow profile and The taping dimensions. Frequency correction factor for ripple current Frequency (f) Rated capacitanceC 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz 100 F C < 150 F 0.15 0.20 0.25 0.30 Correction factor 150 F C 0.15 0.25 0.25 0.30 Frequency (f) Rated capacitanceC 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz 100 F C < 150 F 0.45 0.40 0.55 0.60 Correction factor 150 F C 0.45 0.50 0.60 0.65 Rated capacitanceC Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz 100 F C < 150 F 0.70 0.75 0.80 0.80 Correction factor 150 F C 0.75 0.80 0.85 0.85 Rated capacitanceC Frequency (f) 40 kHz f < 50 kHz 50 kHz f < 100 kHz 100 kHz f < 500 kHz 500 kHz f 100 F C < 150 F 0.85 0.90 1.00 1.00 Correction factor 150 F C 0.85 0.90 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 12-Nov-21