Aluminum Electrolytic Capacitors/ED Snap-in Type Country of Origin Series: Type : ED TS n Features Endurance: 105C 2000h Japan High ripple current capability in U.S.A high frequency range. High ripple current and miniaturization Malaysia to help miniaturization of equipment. n Specifications Category temp. range -40 to +105C -25 to + 105C Rated W.V. Range 200,220,250 V.DC 400, 420, 450 V .DC Nominal Cap. Range 220 to 2200 F 56 to 560 F Capacitance Tolerance 20 % (120Hz/+20C) (A) max. after 5 minutes application of rated working voltage at +20C 3CV DC Leakage Current C:Capacitance(F) V: W.V. (V.DC) tan Please see the attached standard products list Frequency Correction Frequency (Hz) 50 60 100 120 500 1k 10k to Factor for Ripple Current Correction Factor 0.5 0.55 0.68 0.70 0.85 0.90 1.00 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage ) at +105C, the capacitor shall meet the following limits. Endurance Capacitance change 20 % of initial measured value tan < 200 % of initial specified value < initial specified value DC leakage current After storage for 1000 hours at +1052 C with no voltage applied and then being stabilized Shelf Life at +20 C, capacitors shall meet the limits specified in Endurance(With voltage treatment) n Dimensions in mm (not to scale) (10.0) 2-2.00.1 10.00.1 Polarity bar Sleeve Vent L+2.0 max Recommended PWB piercing plan i +0.2 Terminal 0.8-0.1 2.0 max i (t=0.8) Bottom of can 1.5 0.2 Standard terminal type does not require terminal trimming process. i 6.3 mm is available upon request. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. July.2005 EE172 D+1.0 max (3.5) 4.00.5Aluminum Electrolytic Capacitors/ED n Standard Products Case size Specification Min P. ackagingQ ty Part No. Part No. W.V. Cap. Ripple Dia. Length tan PVC sleeve PET sleeve current (20%) (120Hz) Terminal Length Terminal Length (50kHz) 4.0mm (+20C) 4.0mm (+105C) (pcs) (V) (F) (mm) (mm) (Without P.V.C. plate) (A) (Without P.V.C. plate) 270 22 25 2.03 0.15 EETED2D271H EETED2D271HJ 200 330 22 30 2.23 0.15 EETED2D331H EETED2D331HJ 200 390 22 30 2.44 0.15 EETED2D391H EETED2D391HJ 200 25 25 2.44 0.15 EETED2D391J EETED2D391JJ 200 470 22 35 2.64 0.15 EETED2D471H EETED2D471HJ 200 25 30 2.64 0.15 EETED2D471J EETED2D471JJ 200 560 22 40 3.05 0.15 EETED2D561H EETED2D561HJ 200 25 30 3.05 0.15 EETED2D561J EETED2D561JJ 200 30 25 3.05 0.15 EETED2D561K EETED2D561KJ 200 680 22 45 3.45 0.15 EETED2D681H EETED2D681HJ 200 200 25 35 3.45 0.15 EETED2D681J EETED2D681JJ 200 30 30 3.45 0.15 EETED2D681K EETED2D681KJ 200 820 22 50 3.76 0.15 EETED2D821H EETED2D821HJ 200 25 40 3.76 0.15 EETED2D821J EETED2D821JJ 200 30 30 3.76 0.15 EETED2D821K EETED2D821KJ 200 35 25 3.76 0.15 EETED2D821L EETED2D821LJ 200 1000 25 45 4.06 0.15 EETED2D102J EETED2D102JJ 200 30 35 4.06 0.15 EETED2D102K EETED2D102KJ 100 35 30 4.06 0.15 EETED2D102L EETED2D102LJ 200 1200 30 40 4.47 0.15 EETED2D122K EETED2D122KJ 100 35 35 4.47 0.15 EETED2D122L EETED2D122LJ 100 1500 30 50 5.08 0.15 EETED2D152K EETED2D152KJ 100 35 40 5.08 0.15 EETED2D152L EETED2D152LJ 100 1800 35 45 5.48 0.15 EETED2D182L EETED2D182LJ 100 2200 35 50 5.89 0.15 EETED2D222L EETED2D222LJ 100 270 22 30 2.03 0.15 EETED2Q271H EETED2Q271HJ 200 330 22 30 2.23 0.15 EETED2Q331H EETED2Q331HJ 200 25 25 2.23 0.15 EETED2Q331J EETED2Q331JJ 200 390 22 35 2.44 0.15 EETED2Q391H EETED2Q391HJ 200 25 30 2.44 0.15 EETED2Q391J EETED2Q391JJ 200 220 470 22 40 2.64 0.15 EETED2Q471H EETED2Q471HJ 200 25 30 2.64 0.15 EETED2Q471J EETED2Q471JJ 200 30 25 2.64 0.15 EETED2Q471K EETED2Q471KJ 200 560 22 45 3.05 0.15 EETED2Q561H EETED2Q561HJ 200 22 35 3.05 0.15 EETED2Q561J EETED2Q561JJ 200 30 30 3.05 0.15 EETED2Q561K EETED2Q561KJ 200 680 25 40 3.45 0.15 EETED2Q681J EETED2Q681JJ 200 30 30 3.45 0.15 EETED2Q681K EETED2Q681KJ 200 35 25 3.45 0.15 EETED2Q681L EETED2Q681LJ 200 820 25 45 3.76 0.15 EETED2Q821J EETED2Q821JJ 200 30 35 3.76 0.15 EETED2Q821K EETED2Q821KJ 100 Endurance : 105C 2000h Terminal Pitch : 10mm When capacitors of 3545L and 3550L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. July.2005 EE173