EET-UQ2W101HA Panasonic

10.00.1 (10.0) Aluminum Electrolytic Capacitors/ UQ Snap-in Type Series: Type: UQ TS Discontinued Features Endurance : 85 C 2000 h 30 % Smaller than series TS-UP RoHS directive compliant Specifi cations Category Temp. Range 40 C to +85 C 25 C to +85 C Rated W.V. Range 16 V.DC to 100 V.DC 160 V.DC to 250 V.DC 315 V.DC to 450 V.DC Nominal Cap. Range 1000 F to 100000 F 270 F to 3900 F 82 F to 1000 F Capacitance Tolerance 20 % (120 Hz/+20 C) 3CV (A) max. After 5 minutes application of rated working voltage at +20 C DC Leakage Cur rent C : Capacitance (F) V: W.V. (V.DC) tan d Please see the attached standard products list. After 2000 hours application of DC voltage with speci ed ripple current (< rated DC working voltage) at +85 C2 C, the capacitors shall meet the following limits. Endurance Capacitance change 20 % of initial measured value < tan d < 200 % of initial speci ed value DC leakage current < initial speci ed value After storage for 1000 hours at +85 C2 C within no voltage applied and then being stabilized Shelf Life at +20 C, capacitors shall meet the limits speci ed in Endurance. (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) Rated Voltage 50 60 100 120 500 1 k 10 k to 16 V.DC to 100 V.DC /C.F. 0.93 0.95 0.99 1.00 1.05 1.08 1.15 160 V.DC to 450 V.DC /C.F. 0.75 0.80 0.95 1.00 1.20 1.25 1.40 (Unit : mm) Dimen sions in mm (not to scale) 2-02.00.1 Sleeve Polarity bar Vent L+2.0 max. (0D) 4.00.5 Rated voltage etc. indicate to sleeve. Recommended PWB piercing plan +0.2 2.0 max. Terminal 0.8 0.1 (t=0.8) Top of spin 1.50.2 Standard terminal type does not require terminal trimming process. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 EEE-155 0D+1.0 max. (3.5) 4.00.5Aluminum Electrolytic Capacitors/ UQ Standard Prod ucts Endurance : 85 C 2000 h Case size Part No. Speci cation Min. Packaging Q ty PET sleeve Ripple tan d W.V. Cap. Terminal Length Current (120 Hz) Dia. Length (120 Hz) 4.0 mm (120 Hz) (+20 C) (20 %) (Without Top Plate) (+85 C) max. (V. DC) (F) (mm) (mm) (A r.m.s.) (pcs) 12000 22 25 EETUQ1C123HJ 4.5 0.50 200200 15000 22 30 EETUQ1C153HJ 5.3 0.50 2200 22 35 EETUQ1C183HJ 5.6 0.50 200 18000 25 25 EETUQ1C183JJ 5.6 0.50 200 22 40 EETUQ1C223HJ 6.1 0.50 200 22000 25 30 EETUQ1C223JJ 6.1 0.50 200 22 45 EETUQ1C273HJ 6.3 0.50 2000 27000 25 35 EETUQ1C273JJ 6.3 0.5050 20000 30 25 EETUQ1C273KJ 6.3 0.0.50 2200 22 50 EETUQ1C333HJ 6.8 0.50 200 25 40 EETUQ1C333JJ 6.8 0.50 200 33000 30 30 EETUQ1C333KJ 6.8 0.50 200 16 35 25 EETUQ1C333LJ 6.88 0.50 200 25 45 EETUQ1C393JJ 6.6.9 0.56 200 39000 30 35 EETUQ1C393KJ 6.9 0.5656 100 25 50 EETUQ1C473JJ 7.57.57.5 0.60.64 200 47000 30 40 EETUQ1C473KJ 7.577.5.5 0.64 100 35 30 EETUQ1C473LJ 7.7.57.55 0.64 200 30 45 EETUQ1C563KJKJ 8.788.7 0.73 100 56000 35 35 EETUQ1C563LJ63 J 8.77 0.73 100 30 50 EETUQ1C683KJC6 3KJJ 9.9.1 0.85 100 68000 35 40 EETUQ1C683LJQ1C683LJ683LJ 9.1 0.85 100 82000 35 45 EETUQ1C823LJUQ C823LJC823LJ 9.5 0.99 100 100000 35 50 EETUQ1C104LJET Q1C104LJC104LJ 10.2 1.17 100 8200 22 25 EETUQ1E822HJEETUQ1E822HQ1E822H 3.6 0.40 200 10000 22 30 EETUQ1E103HJEETUQ1E10TUQ1E10 HJ 3.8 0.40 200 22 30 EETUQ1E123HJEETUQ1EEETUQ1E 23 4.1 0.40 200 12000 25 255 EETUQEETUQEETUQ1E123JJE12 4.1 0.40 200 22 335 EEEETUEETUQ1E153HJQ1E 4.6 0.40 200 15000 25 303030 EEEEEETUQ1E153JJUQ 4.6 0.40 200 22 44400 EETUQ1E183HJET 5.5 0.40 200 18000 25 353535 EEEETUQ1E183JJ 5.5 0.40 200 300 25 EETUQ1E183KJ 5.5 0.40 200 222 45 EETUQ1E223HJ 6.1 0.40 200 25 400 EETUQ1E223JJ 6.1 0.40 200 22000 30 330 EETUQ1E223KJ 6.1 0.40 200 25 35 25 EETUQ1E223LJ 6.1 0.40 200 25 45 EETUQ1E273JJ 6.2 0.40 200 2700000 30 35 EETUQ1E273KJ 6.2 0.40 100 255 50 EETUQ1E333JJ 6.8 0.40 200 33000 3030 40 EETUQ1E333KJ 6.8 0.40 100 35 30 EETUQ1E333LJ 6.8 0.40 200 30 45 EETUQ1E393KJ 7.4 0.46 100 39000 35 35 EETUQ1E393LJ 7.4 0.46 100 30 50 EETUQ1E473KJ 8.0 0.54 100 4700000 35 40 EETUQ1E473LJ 8.0 0.54 100 556000 35 45 EETUQ1E563LJ 8.7 0.63 100 68000 35 50 EETUQ1E683LJ 9.6 0.75 100 When capacitors of 03545L and 03550L are mount ed on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives in clud ing halogenated compositions.) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 EEE-156 DDDiDiiiisisisisssssccocoononontnttitiinunnueueueueuuueeededdd