IRELESS W Bluetooth Low Energy embedded Single Mode Module PAN1760 OUTLINES PAN1760 is based on Toshibas single chip TC35667 Bluetooth semiconductor device with embedded Toshiba Bluetooth 4.1 LE stack and GATT profile. T he TC35667 i s a h ighly integrated and compact Bluetooth controller that delivers high-speed operation at ultra-low power consumption. It si gnificantly reduces external component count and power consumption in applications requiring Bluetooth Low Energy support. PAN1760 and PAN1026 share the same form factor and module footprint. Bluetooth LE applications a nd profiles developed using PAN1026 can almost 1:1 be transferred to PAN1760. Only small changes for higher feature set of PAN1760 are needed. Central and Peripheral Mode are supported. FCC, IC and CE approval are available. The integrated EEPROM can be used for applications, up to 32kB are available for stand alone operation, no host MCU is needed. FEATURES General - Same form factor and footprint as PAN1026 - Bluetooth 4.1 (LE) embedded GATT profile with high level API commands, compatible to Toshiba reference BLE profiles - Power consumption Max 5.4mA Tx/ Max 5.4mA Rx/<1A Sleep - Tx power 0 dBm, Rx sensitivity -91 dBm - Small 15.6 x 8.7 x 1.8 mm SMD package - Compliant to BT 4.1 - 32kB on-chip RAM for applications - 512kBit eeprom to download user program during start up - Operation with or without external host (standalone) feasible - Standard SIG BLE and SPP over BLE profiles available - Temperature Range from -40C to +85C Interfaces - UART, I2C, GPIO (10 in/out), Wake-Up control pins, ADC(4 CH), SPI Bluetooth 4.1 - Support for Over the Air Update (OTA) - Support for Scaernett t - GAP central and peripheral support for LE - GATT, SMP and SDB support for LE Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is an y doubt Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is an y doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1760 4.1 Rev. 0.3 regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1740 Rev. 1.0 Hardware Status: Pre Production ODULES Panasonic Industrial Devices Europe GmbH MAPPLICATIONS - Wearables - Consumer Electronics - Automotive Aftermarket Products - Health Care, Medical Diagnostic Systems - Industrial Sensors and Measurement Devices - Sports and leisure equipment - Heart Rate Monitor - Mobile phone accessories - Blood Glucose Meter - Bluetooth LE Sensors BLOCK DIAGRAM EEPROM I2C Antenna VCC/VSS UART Toshiba GPIO Single Mode Bluetooth Filter Slow Clock 32.768 kHz LSI Wake Up Input TC35667-006 Wake Up Output Crystal PAN1760 26 MHz TECHNICAL CHARACTERISTICS Parameter 0,1% BER Value Condition / Note Receiver Sensitivity (1% PER) - 91 dBm 500 kpbs / MSK (high-gain mode) Output Power 0 dBm Maximum setting Power Supply 1.8V - 3.6V Single operation voltage Transmit and Receive Mode 5.4 mA peak, low power modes available Low Power Mode <1 A Operating Temperature Range -40C / +85C Industrial Range