Thick Film Chip Resistors Thick Film Chip Resistors 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features Small size and lightweight High reliability Metal glaze thick lm resistive element and three layers of electrodes Compatible with placement machines Taping packaging available Suitable for both re ow and ow sol der ing Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B Explanation of Part Numbers ERJXGN, 1GE, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Series, 5 % type 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Packaging Methods Marking Resistance Tolerance Product Code Size, Power Rating Code Packaging Type Marking Thick Film Type : inches Power R. Code Code Tolerance Chip Resistors Pressed Carrier Taping XGN: 01005 0.031 W J 5% Value Marking on Y ERJXGN Y 2mm pitch, 20000 pcs. black side 1GE : 0201 0.05 W 0 Jumper Pressed Carrier Taping No marking 2GE : 0402 0.1 W Nil C ERJ1GE 2mm pitch, 15000 pcs. 3GE : 0603 0.1 W Punched Carrier Taping 6GE : 0805 0.125 W Resistance Value X ERJ2GE 2mm pitch, 10000 pcs. 8GE : 1206 0.25 W The first two digits are significant figures of resistance and ERJ3GE 14 : 1210 0.5 W the third one denotes number of zeros following. Punched Carrier Taping V ERJ6GE Decimal Point is expressed by R as 4.7 = 4R7. 12 : 1812 0.75 W 4mm pitch ERJ8GE Jumper is expressed by R00. 12Z : 2010 0.75 W ERJ14 1T : 2512 1W ERJ12 Embossed CarrierTaping U 4mm pitch ERJ12Z When omitted, the rest of the P/N factors shall be moved up respectively. ERJ1T (Only XGN, 1GN, 2GE type) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008Thick Film Chip Resistors Dimensions in mm (not to scale) Construction L a W Protective coating t Electrode (Inner) Alumina substrate b Dimensions (mm) Type Mass (Weight) (inches) (g/1000 pcs.) LWa b t ERJXG 0.02 0.02 0.03 0.03 0.02 0.40 0.20 0.10 0.10 0.13 0.04 (01005) ERJ1G 0.03 0.03 0.05 0.05 0.03 0.60 0.30 0.10 0.15 0.23 0.15 (0201) Electrode (Between) ERJ2G 0.05 0.05 0.10 0.05 0.05 1.00 0.50 0.20 0.25 0.35 0.8 (0402) ERJ3G 0.15 +0.15 0.20 0.15 0.10 1.60 0.80 0.30 0.30 0.45 2 0.05 (0603) ERJ6G 0.20 0.10 0.20 0.20 0.10 2.00 1.25 0.40 0.40 0.60 4 (0805) ERJ8G +0.05 +0.05 0.20 0.20 0.10 3.20 1.60 0.50 0.50 0.60 10 0.20 0.15 (1206) ERJ14 0.20 0.20 0.20 0.20 0.10 3.20 2.50 0.50 0.50 0.60 16 Thick film (1210) Electrode (Outer) resistive element ERJ12 0.20 0.20 0.20 0.20 0.10 4.50 3.20 0.50 0.50 0.60 27 (1812) ERJ12Z 0.20 0.20 0.20 0.20 0.10 5.00 2.50 0.60 0.60 0.60 27 (2010) ERJ1T 0.20 0.20 0.20 0.20 0.10 6.40 3.20 0.65 0.60 0.60 45 (2512) Ratings <For Resistor> Category Temperature Limiting Element Maximum Overload Resistance Resistance T.C.R. Type Power Rating (2) Range (Operating 6 Voltage (Maximum Voltage Tolerance Range 10 /C Temperature Range) (inches) at 70 C (W) (1) RCWV) (V) (V) (%) ( ) (ppm/C) (C) <10 : 100 to +600 ERJXG 0.031 15 30 5 4.7 to 1 M (E24) 10 to 100 : 300 55 to +125 (01005) 100 < : 200 ERJ1G 0.05 25 50 5 1 to 10 M (E24) 55 to +125 (0201) <10 : ERJ2G 0.1 50 100 5 1 to 10 M (E24) 55 to +155 (0402) 100 to +600 ERJ3G 0.1 75 150 5 1 to 10 M (E24) 55 to +155 (0603) ERJ6G 0.125 150 200 5 1 to 10 M (E24) 55 to +155 (0805) 10 to 1 M : ERJ8G 0.25 200 400 5 1 to 10 M (E24) 55 to +155 (1206) 200 ERJ14 0.5 200 400 5 1 to 10 M (E24) 55 to +155 (1210) ERJ12 0.75 200 500 5 1 to 10 M (E24) 55 to +155 (1812) 1 M <: ERJ12Z 0.75 200 500 5 1 to 10 M (E24) 55 to +155 (2010) 400 to +150 ERJ1T 1200 500 5 1 to 1 M (E24) 55 to +155 (2512) (1) Rated Continuous Working Voltage (RCWV) shall be de termined from RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage (max. RCWV) list ed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de termined from SOTV=2.5 Power Rating or max. Over load Volt age list ed above which ev er less. <For Jumper> Power Derating Curve Type Rated Current Maximum Overloa d Current For resistors operated in ambient temperatures above (inches) (A) (A) 70 C, power rating shall be derated in accordance ERJXG (01005) 0.5 1 with the gure below. ERJ1G (0201) ERJ2G (0402) 55 C 70 C 12 100 ERJ3G (0603) 2G, 3G, 6G, 8G, 80 ERJ6G (0805) 14, 12, 12Z, 1T 60 ERJ8G (1206) 40 ERJ14 (1210) XG, 1G 155 C 24 20 ERJ12 (1812) 125 C 0 ERJ12Z (2010) 60 40 20 0 20 40 60 80 100 120 140 160 180 ERJ1T (2512) Ambient Temperature (C) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Rated Load (%)