Anti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Re sis tors
Type: ERJ PA2, P03, PA3, P06, P08, P14
Features
ESD surge characteristics superior to standard metal lm resistors
High reliability
Metal glaze thick lm resistive element and three layers of electrodes
Suitable for both re ow and ow soldering
High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03)
0.25 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
AEC-Q200 quali ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11 12
E R J P 0 6 D 1 0 0 2 V
Product Code Size, Power Rating Resistance Tolerance Resistance Value Packaging Methods
Thick Film Code Inch Power R. Code Tolerance Packaging Part No.
Code
The rst two or three digits are signicant gures
Chip Resistors
PA2 0402 0.20 W D 0.5 % of resistance and the third or 4th one denotes
Punched Carrier Taping
X ERJPA2
number of zeros following.
2 mm pitch, 10,000 pcs.
P03 0603 0.20 W F 1 %
Three digit type (5 %),
ERJP03
PA3 0603 0.25 W J 5 %
four digit type (1 %, 0.5 %) Punched Carrier Taping
ERJPA3
V
P06 0805 0.50 W
4 mm pitch, 5,000 pcs. ERJP06
Example: 2222.2k , 100210k
P08 1206 0.66 W
ERJP08
P14 1210 0.50 W Embossed Carrier Taping
U ERJP14
4 mm pitch, 5,000 pcs.
Construction Dimensions in mm (not to scale)
L
a
Protective coating
Electrode (Inner)
W
Alumina substrate
t
b
Electrode
(Between) Dimensions (mm)
Mass (Weight)
Part No.
[g/1000 pcs.]
LWa b t
0.05 0.05 0.15 0.05 0.05
ERJPA2 1.00 0.50 0.20 0.25 0.35 0.8
0.15 +0.15 +0.15 0.15 0.10
ERJP03 1.60 0.80 0.15 0.30 0.45 2
0.05 0.10
0.15 +0.15 +0.15 0.10 0.10
ERJPA3 1.60 0.80 0.15 0.25 0.45 2
0.05 0.10
0.20 0.10 0.20 0.20 0.10
ERJP06 2.00 1.25 0.25 0.40 0.60 4
Thick lm Electrode (Outer)
resistive element
+0.05 +0.05
0.20 0.20 0.10
ERJP08 3.200.20 1.600.15 0.40 0.50 0.60 10
0.20 0.20 0.20 0.20 0.10
ERJP14 3.20 2.50 0.35 0.50 0.60 16
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Nov. 2017Anti-Surge Thick Film Chip Resistors
Ratings
Power Limiting Maximum
(3) Resistance Resistance Category
Part No. Rating Element Overload T.C.R. AEC-Q200
(1) (2) Tolerance Range 6 Temperature
(inch size) at 70 C Voltage Voltage (10 /C) Grade
(%) () Range (C)
(W) (V) (V)
0.5, 1 10 to 1M (E24, E96) 100
ERJPA2
0.20 50 100 55 to +155 Grade 0
(0402)
5 10 to 1M (E24) 200
0.5 10 to 1M (E24, E96) 150
ERJP03
1 10 to 1M (E24, E96) 200
0.20 150 200 55 to +155 Grade 0
(0603)
R < 10 : 150 to +400
5 1 to 1M (E24)
10 R : 200
0.5, 1 10 to 1M (E24, E96) 100
ERJPA3
0.25 150 200 55 to +155 Grade 0
(0603)
5 1 to 1.5M (E24) 200
R < 33 : 300
0.5, 1 10 to 1M (E24, E96)
33 R : 100
ERJP06
0.50 400 600 55 to +155 Grade 0
R < 10 : 100 to +600
(0805)
5 1 to 3.3M (E24) 10 R < 33 : 300
33 R : 200
0.5, 1 10 to 1M (E24, E96) 100
ERJP08
0.66 500 1000 55 to +155 Grade 0
R < 10 : 100 to +600
(1206)
5 1 to 10M (E24)
10 R : 200
0.5, 1 10 to 1M (E24, E96) 100
ERJP14
0.50 200 400 55 to +155 Grade 0
R < 10 : 100 to +600
(1210)
5 1 to 1M (E24)
10 R : 200
(1) Rated Continuous Working Voltage (RCWV) shall be de termined fr om RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum Overload Voltage listed above, whichever less.
(3) Use it on the condition that the case temperature is below the upper category temperature.
Power Derating Curve
55 C 70 C
100
For resistors operated in ambient temperatures above 125 C
80
70 C, power rating shall be derated in accordance with
ERJ P06,
P08
the gure on the right.
60
When the temperature of ERJP14 is 155 C or less, the
40
derating start temperature can be changed to 125 C. (See ERJ PA2, P03,
PA3, P14
the dotted line) 20
155 C
0
60 40 20 0 20 40 60 80 100 120 140 160 180
Ambient Temperature (C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Nov. 2017
Rated Load (%)