Anti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Resis tors
Type: ERJ PA2, P03, PA3, P06, P08, P14
Features
ESD surge characteristics superior to standard metal lm resistors
High reliability
Metal glaze thick lm resistive element and three layers of electrodes
Suitable for both re ow and ow soldering
High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03)
0.25 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
AEC-Q200 quali ed
RoHS compliant
As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11 12
E R J P 0 6 D 1 0 0 2 V
Product Code Size, Power Rating Resistance Tolerance Resistance Value Packaging Methods
Thick Film Code Inch Power R. Code Tolerance Packaging Part No.
Code
The rst two or three digits are signicant gures
Chip Resistors
PA2 0402 0.20 W D 0.5 % of resistance and the third or 4th one denotes
Punched Carrier Taping
X ERJPA2
number of zeros following.
2 mm pitch, 10,000 pcs.
P03 0603 0.20 W F 1 %
Three digit type (5%),
ERJP03
PA3 0603 0.25 W J 5 %
four digit type (1%, 0.5%) Punched Carrier Taping
ERJPA3
V
P06 0805 0.50 W
4 mm pitch, 5,000 pcs.
Example: 2222.2 k, 100210 k ERJP06
P08 1206 0.66 W
ERJP08
P14 1210 0.50 W Embossed Carrier Taping
U ERJP14
4 mm pitch, 5,000 pcs.
Construction Dimensions in mm (not to scale)
L
a
Protective coating
Electrode (Inner)
W
Alumina substrate
t
b
Electrode
(Between) Dimensions (mm)
Part No. Mass (Weight)
(inch size) [g/1000 pcs.]
LWa b t
ERJPA2
0.05 0.05 0.10 0.05 0.05
1.00 0.50 0.25 0.25 0.35 0.8
(0402)
ERJP03
0.15 +0.15 +0.15 0.15 0.10
1.60 0.80 0.15 0.30 0.45 2
0.05 0.10
(0603)
ERJPA3 0.15 +0.15 +0.15 0.10 0.10
1.60 0.80 0.15 0.25 0.45 2
0.05 0.10
(0603)
ERJP06 0.20 0.10 0.20 0.20 0.10
2.00 1.25 0.25 0.40 0.60 4
Thick lm Electrode (Outer)
(0805)
resistive element
ERJP08 +0.05 +0.05
0.20 0.20 0.10
3.200.20 1.600.15 0.40 0.50 0.60 10
(1206)
ERJP14
0.20 0.20 0.20 0.20 0.10
3.20 2.50 0.35 0.50 0.60 16
(1210)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
09 Jun. 2015Anti-Surge Thick Film Chip Resistors
Ratings
(3) Limiting Maximum
Power Rating Resistance Resistance Category
Part No. Element Overload T.C.R.
at 70 C (1) (2) Tolerance Range 6 Temperature
(inch size) Voltage Voltage (10 /C)
(W) (%) () Range (C)
(V) (V)
0.5, 1 10 to1M (E24, E96) 100
ERJPA2
0.20 50 100 55 to +155
(0402)
5 1 to10M (E24) 200
0.5 10 to1M (E24, E96) 150
ERJP03
1 10 to1M (E24, E96) 200
0.20 150 200 55 to +155
(0603)
R < 10 : 150 to +400
5 1 to1M (E24)
10 R : 200
<
0.5, 1 10 to1M (E24, E96) 100
ERJPA3
0.25 150 200 55 to +155
(0603)
5 1 to1.5M (E24) 200
R < 33 : 300
0.5, 1 10 to1M (E24, E96)
33 R : 100
<
ERJP06
0.50 400 600 R < 10 : 100 to +600 55 to +155
(0805)
5 1 to 3.3M (E24) 10 < R < 33 : 300
33 R : 200
<
0.5, 1 10 to1M (E24, E96) 100
ERJP08
0.66 500 1000 55 to +155
R < 10 : 100 to +600
(1206)
5 1 to10M (E24)
10 < R : 200
0.5, 1 10 to1M (E24, E96) 100
ERJP14
0.50 200 400 55 to +155
R < 10 : 100 to +600
(1210)
5 1 to1M (E24)
10 R : 200
<
(1) Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage list ed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de termined from SOTV=2.5 RCWV or max. Over load Volt age list ed above which ev er less.
(3) Use it on the condition that the case temperature is below 155 C.
Power Derating Curve 55 C
70 C
100
For resistors operated in ambient temperatures above 125 C
80
70 C, power rating shall be derated in accordance with ERJ P06,
P08
the gure on the right.
60
When the temperature of ERJP14 is 155 C or less, the
40
derating start temperature can be changed to 125 C. (See ERJ PA2, P03,
PA3, P14
the dotted line) 20
155 C
0
60 40 20 0 20 40 60 80 100 120 140 160 180
Ambient Temperature (C)
ESD Characteristic
R=0(< 1.5 k)/150(> 1.5 k)
Anti-Surge Thick Film Chip Resistors(ERJP Type)
Sample
C=150pF
3.0kV
Thick Film Chip Resistors(ERJ Type)
ERJP03, PA3(1608 (0603) size) ERJP06 (2012 (0805) size)
5% 5%
ERJPA3
0% 0%
ERJP06
ERJP03
-5% -5%
-10% -10%
ERJ6G
-15% -15%
ERJ3G
-20% -20%
-25% -25%
-30% -30%
10 100 1k 10k 100k 1M 10 100 1k 10k 100k 1M
ERJP08(3216 (1206) size) ERJP14(3225 (1210) size)
5% 5%
ERJP08
ERJP14
0% 0%
-5% -5%
ERJ8G
ERJ14
-10% -10%
-15% -15%
-20% -20%
-25% -25%
-30% -30%
10 100 1k 10k 100k 1M 10 100 1k 10k 100k 1M
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
09 Jun. 2015
Change Ratio of Change Ratio of
Resistance Value Resistance Value
Rated Load (%)
Change Ratio of Change Ratio of
Resistance Value Resistance Value