Anti-Surge Thick Film Chip Resistors (Double-sided resistive elements structure) Anti-Surge Thick Film Chip Re sis tors (Double-sided resistive elements structure) 0805 Type: ERJ P6W Features ESD surge characteristics superior to standard metal lm resistors High reliability Metal glaze thick lm resistive element and three layers of electrodes Suitable for both re ow and ow soldering High power 0.50 W : 2012(0805) size(ERJP6W) High pulse characteristics 1.5 times higher than 0805 inch size Anti-Surge Thick Film Chip Resistors (ERJP06) Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B RoHS compliant Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 & 3 + 1 8 7 Resistance Tolerance Packaging Methods Product Code Size, Power Rating Resistance Value Thick Film Type: inch Power R. Code Tolerance The rst two or three digits are signicant gures of resistance Code Packaging Chip Resistors and the third or 4th one denotes number of zeros following. P6W : 0805 0.50 W F 1 % Punched Carrier Taping Three digit type (5%), four digit type (1%) V J 5 % 4 mm pitch, 5,000 pcs. Example: 222 2.2 k , 1002 10 k Construction Dimensions in mm (not to scale) Protective coating Electrode (Inner) L a Alumina substrate W t Electrode (Between) a Electrode (Outer) Dimensions (mm) Type Mass (Weight) Thick lm Bottom side element (inch size) g/1000 pcs. LWa t resistive element ERJP6W 0.20 0.20 0.20 0.10 2.00 1.25 0.35 0.65 6 (0805) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2014Anti-Surge Thick Film Chip Resistors (Double-sided resistive elements structure) Ratings (3) Limiting Maximum Power Rating Resistance Resistance Category Type Element Overload T.C.R. at 70 C (1) (2) Tolerance Range Temperature 6 (inch size) Voltage Voltage (10 /C) (W) (%) () Range (C) (V) (V) 10 to 1 M 1 200 (E24, E96) ERJP6W 0.50 150 200 55 to +155 (0805) R < 10 100 to +600 1 to 1 M 5 (E24) 10 R 200 < (1) Rated Continuous Working Voltage (RCWV) shall be de termined from RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage liste d above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be det ermined from SOTV=2.5 Power Rating or max. Over load Volt age list ed above which ev er less. (3) Use it on the condition that the case temperature is below 155 C. 55 C 70 C Power Derating Curve 100 For resistors operated in ambient temperatures above 80 70 C, power rating shall be derated in accordance 60 with the gure on the right. 40 20 155 C 0 60 40 20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) ESD Characteristic R=0( 1.5 k)/150 (> 1.5 k ) Sample C=150pF 3.0kV Anti-Surge Thick Film Chip Resistors(ERJP6W Type) Thick Film Chip Resistors(ERJ6G Type) 5% 0% -5% -10% -15% -20% IBOHF 3BUJP PG 3FTJTUBODF 7BMVF -25% -30% 10 100 1k 10k 100k 1M Limiting Power Curve In rush pulse Characteristic Pulse duration : t Pp Test cycle : 1 cycles Limiting Power Spec : Resistance value = within 1% 0 Anti-Surge Thick Film Chip Resistors(ERJP6W Type) Anti-Surge Thick Film Chip Resistors(ERJP06 Type) 100 10 1 1 10 100 1000 Pulse duration t (msec) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2014 Limiting Power : Pp (W) Rated Load (%)
