Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors Type: ERJ PA2, P03, PA3, P06, P08, P14 Features ESD surge characteristics superior to standard metal lm resistors High reliability Metal glaze thick lm resistive element and three layers of electrodes Suitable for both re ow and ow soldering High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03) 0.25 W : 0603 inch / 1608 mm size (ERJPA3) 0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14) 0.66 W : 1206 inch / 3216 mm size (ERJP08) Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B AEC-Q200 quali ed RoHS compliant As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J P 0 6 D 1 0 0 2 V Product Code Size, Power Rating Resistance Tolerance Resistance Value Packaging Methods Thick Film Code Inch Power R. Code Tolerance Packaging Part No. Code The rst two or three digits are signicant gures Chip Resistors PA2 0402 0.20 W D 0.5 % of resistance and the third or 4th one denotes Punched Carrier Taping X ERJPA2 number of zeros following. 2 mm pitch, 10,000 pcs. P03 0603 0.20 W F 1 % Three digit type (5 %), ERJP03 PA3 0603 0.25 W J 5 % four digit type (1 %, 0.5 %) Punched Carrier Taping ERJPA3 V P06 0805 0.50 W 4 mm pitch, 5,000 pcs. ERJP06 Example: 2222.2k , 100210k P08 1206 0.66 W ERJP08 P14 1210 0.50 W Embossed Carrier Taping U ERJP14 4 mm pitch, 5,000 pcs. Construction Dimensions in mm (not to scale) L a Protective coating Electrode (Inner) W Alumina substrate t b Electrode (Between) Dimensions (mm) Mass (Weight) Part No. g/1000 pcs. LWa b t 0.05 0.05 0.15 0.05 0.05 ERJPA2 1.00 0.50 0.20 0.25 0.35 0.8 0.15 +0.15 +0.15 0.15 0.10 ERJP03 1.60 0.80 0.15 0.30 0.45 2 0.05 0.10 0.15 +0.15 +0.15 0.10 0.10 ERJPA3 1.60 0.80 0.15 0.25 0.45 2 0.05 0.10 0.20 0.10 0.20 0.20 0.10 ERJP06 2.00 1.25 0.25 0.40 0.60 4 Thick lm Electrode (Outer) resistive element +0.05 +0.05 0.20 0.20 0.10 ERJP08 3.200.20 1.600.15 0.40 0.50 0.60 10 0.20 0.20 0.20 0.20 0.10 ERJP14 3.20 2.50 0.35 0.50 0.60 16 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 Nov. 2017Anti-Surge Thick Film Chip Resistors Ratings Power Limiting Maximum (3) Resistance Resistance Category Part No. Rating Element Overload T.C.R. AEC-Q200 (1) (2) Tolerance Range 6 Temperature (inch size) at 70 C Voltage Voltage (10 /C) Grade (%) () Range (C) (W) (V) (V) 0.5, 1 10 to 1M (E24, E96) 100 ERJPA2 0.20 50 100 55 to +155 Grade 0 (0402) 5 10 to 1M (E24) 200 0.5 10 to 1M (E24, E96) 150 ERJP03 1 10 to 1M (E24, E96) 200 0.20 150 200 55 to +155 Grade 0 (0603) R < 10 : 150 to +400 5 1 to 1M (E24) 10 R : 200 0.5, 1 10 to 1M (E24, E96) 100 ERJPA3 0.25 150 200 55 to +155 Grade 0 (0603) 5 1 to 1.5M (E24) 200 R < 33 : 300 0.5, 1 10 to 1M (E24, E96) 33 R : 100 ERJP06 0.50 400 600 55 to +155 Grade 0 R < 10 : 100 to +600 (0805) 5 1 to 3.3M (E24) 10 R < 33 : 300 33 R : 200 0.5, 1 10 to 1M (E24, E96) 100 ERJP08 0.66 500 1000 55 to +155 Grade 0 R < 10 : 100 to +600 (1206) 5 1 to 10M (E24) 10 R : 200 0.5, 1 10 to 1M (E24, E96) 100 ERJP14 0.50 200 400 55 to +155 Grade 0 R < 10 : 100 to +600 (1210) 5 1 to 1M (E24) 10 R : 200 (1) Rated Continuous Working Voltage (RCWV) shall be de termined fr om RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage list ed above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum Overload Voltage listed above, whichever less. (3) Use it on the condition that the case temperature is below the upper category temperature. Power Derating Curve 55 C 70 C 100 For resistors operated in ambient temperatures above 125 C 80 70 C, power rating shall be derated in accordance with ERJ P06, P08 the gure on the right. 60 When the temperature of ERJP14 is 155 C or less, the 40 derating start temperature can be changed to 125 C. (See ERJ PA2, P03, PA3, P14 the dotted line) 20 155 C 0 60 40 20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 Nov. 2017 Rated Load (%)