High Precision Thick Film Chip Resistors ERJ PB type ERJ PB3, PB6 series Features Achieve the resistance tolerance 0.1 % with high reliability metal glaze thick film resistor 6 Guarantee the temperature coefficient of Resistance 5010 /K in high resistance range up to 1 M High power : 0.20 W0603 inch /1608 mm size(ERJPB3) : 0.25 W0805 inch /2012 mm size(ERJPB6) Reference Standard : IEC 60115-8, JIS C 5201-8, JEITA RC-2134C AEC-Q200 compliant RoHS compliant As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files Explanation of part numbers 1 2 3 4 5 6 7 9 10 11 12 8 E R J P B 6 B 1 0 0 2 V Resistance tolerance Product code Size, Power rating Resistance value Packaging methods The first three digits are Thick film Power Code Tolerance Code Packaging Part No. Code inch significant figures of chip resistors rating B 0.1 Punched carrier taping ERJPB3 V resistance and the last 4 mm pitch, 5,000 pcs PB3 0603 0.20 W D 0.5 ERJPB6 one denotes number of PB6 0805 0.25 W zeros following. (Ex.) 5110 : 511 1003 : 100 k Ratings Limiting Maximum Category Resistance AEC- Resistance *1 T.C.R. Part No. element overload temperature Power rating tolerance range Q200 *2 *3 -6 (inch size) range (70 )(W) voltage voltage (10 /K) (%) () Grade (V) (V) () ERJPB3 0.1 200 to 100 k 0.20 150 200 50 55 to +155 Grade 0 (0603) 0.5 (E24, E96) ERJPB6 0.1 200 to 1 0.25 150 200 50 55 to +155 Grade 0 (0805) 0.5 (E24, E96) *1: Use it on the condition that the case temperature is below the upper category temperature. *2: Rated continuous working voltage (RCWV) shall be determined from RCWV=Power rating Resistance value, or Limiting Element Voltage listed above, whichever less. *3: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum overload voltage listed above, whichever less. -55 70 100 Power derating curve 80 For resistors operated in ambient temperatures 60 above 70 , power rating shall be derated in 40 accordance with the figure on the right. 155 20 0 -60 -40 -20 0 20 40 60 80 100 120 140160 180 Ambient temperature () Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Mar-20 Rated load (%)High Precision Thick Film Chip Resistors Construction Protective coating Electrode (Inner) Alumina substrate Electrode (Between) Electrode (Outer) Thick lm resistive element Dimensions in mm (not to scale) L a W T b Unit : mm Mass (Weight) Dimensions Part No. (g/1000 pcs) L W a b T ERJPB3 1.600.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.250.10 0.450.10 2 ERJPB6 2.000.20 1.250.10 0.250.20 0.400.20 0.600.10 4 Performance Performance Test item Test conditions requirements R Within specified Resistance 20 tolerance Within specified T. C. R. +25 / +125 T. C. R. Overload 0.5 % Rated voltage 2.05 s Resistance to soldering heat 0.5 % 270 , 10 s Rapid change of temperature 0.5 % 55 (30 min.) / +155 (30 min.)100 cycles High temperature exposure 0.5 % +155 , 1000 h Damp heat, 0.5 % 60 , 90 % to 95 %RH, 1000 h Steady state 60 , 90 % to 95 %RH, Rated voltage, Load life in humidity 0.5 % 1.5 h ON / 0.5 h OFF cycle, 1000 h Endurance at 70 0.5 % 70 Rated voltage , 1.5 h ON / 0.5 h OFF cycle, 1000 h Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Mar-20
