Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type ERJ UP type ERJ UP3, UP6, UP8 series Features High resistance to sulfurization achieved by adopting Anti-Sulfurated electrode material (Ag-Pd-based inner electrode) and structure ESD surge characteristics superior to standard metal film resistors High reliability : Metal glaze thick film resistive element and three layers of electrodes Suitable for both reflow and flow soldering High power 0.25 W0603 inch / 1608 mm size(ERJUP3) 0.50 W0805 inch / 2012 mm size(ERJUP6) 0.66 W : 1206 inch / 3216 mm size(ERJUP8) Reference standard : IEC 60115-8JIS C 5201-8JEITA RC-2134C AEC-Q200 compliant RoHS compliant As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files. Explanation of part numbers 1T ERJS02 ERJS1T 1 2 3 4 5 6 7 8 9 10 11 12 R J U P 6 D 1 0 0 V E 2 Product code Size, Power rating Resistance tolerance Resistance value Packaging methods Code inch Power rating Code Tolerance The first two or three digits are Code Packaging Part No. Thick film significant figures of resistance and chip resistors UP3 0603 0.25 W D 0.5 ERJUP3 the third or 4th one denotes Punched carrier taping UP6 0805 0.50 W F 1 V ERJUP6 4 mm pitch, 5,000 pcs number of zeros following. ERJUP8 UP8 1206 0.66 W J 5 Three digit type (5 %), Four digit type (1 %, 0.5 %) Ex. 222: 2.2 k, 1002 : 10 k Ratings Power Limiting Maximum Category Resistance Resistance *1 Part No. element overload T.C.R. temperature AEC-Q200 rating tolerance range *2 *3 -6 (inch size) range Grade (70 ) voltage voltage (10 /K) (%) () () (W) (V) (V) 0.5, 1 10 to 1 M (E24, E96) 100 ERJUP3 0.25 150 200 55 to +155 Grade 0 (0603) 5 1 to 1.5 M (E24) 200 0.5, 1 10 to 1 M (E24, E96) 100 ERJUP6 0.50 400 600 R<10 : 100 to +600 55 to +155 Grade 0 (0805) 5 1 to 3.3 M (E24) 10 R : 200 0.5, 1 10 to 1 M (E24, E96) 100 ERJUP8 R<10 : 100 to +600 55 to +155 0.66 500 1000 Grade 0 (1206) 5 1 to 10 M (E24) 10 R : 200 *1: Use it on the condition that the case temperature is below the upper category temperature. *2: Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Power Rating Resistance Value, or Limiting Element Voltage listed above, whichever less. *3: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum Overload Voltage listed above, whichever less. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Jan-20Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type -55 70 100 Power derating curve ERJUP6,UP8 For resistors operated in ambient temperatures 80 above 70 , power rating shall be derated in 125 60 accordance with the figure on the right. 50 % 40 ERJUP3 20 155 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Ambient temperature () Construction Protective coating Electrode (Inner) Ag-Pd-based Alumina substrate Electrode (Between) Thick lm resistive element Electrode (Outer) Dimensions in mm (not to scale) L a W T b Unit : mm Mass (Weight) Dimensions Part No. L W a b T (g/1000 pcs) ERJUP3 1.600.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.250.10 0.450.10 2 ERJUP6 2.000.20 1.250.10 0.250.20 0.400.20 0.600.10 4 ERJUP8 3.20+0.05/-0.20 1.6+0.05/-0.15 0.400.20 0.500.20 0.600.10 10 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Jan-20 Rated load (%)