ETQ-P3M2R2HFP Panasonic

Power Inductors Power Choke Coil (Automotive Grade) Series : PCC-M0530M-H PCC-M0630M-H High heat resistance and high reliability using metal composite core (MC) Features Reduce core loss in high frequency band (More than 2 MHz) High heat resistance : Operation up to 150 C including self-heating Low profile : max. height SMD type High-reliability : High vibration resistance as result of newly developed integral construction under severe reliability conditions of automotive and other strenuous applications High bias current : Excellent inductance stability using ferrous alloy magnetic material Temp. stability : Excellent inductance stability over broad temp. range Low audible (buzz) noise : A gapless structure achieved with metal composite core High efficiency : Low DC resistance of winding and low eddy-current loss of the core Shielded construction AEC-Q200 compliant RoHS compliant Recommended Applications Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC Standard Packing Quantity (Minimum Quantity/Packing Unit) 2,000 pcs/box 2 reel Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E T Q P M H F Product Code Classification Height Winding Inductance Core Suffix Size 2R2 2.2 H Code Size 100 10 H P 5 mm N 6 mm Temperature rating Operating temperature range Tc : -40 to +150 (Including self-temperature rise) After PWB mounting Storage condition Before PWB mounting Ta : -5 to +35 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Feb-20Power Inductors Series PCC-M0530M-H/PCC-M0630M-H (ETQP3MHFP/ETQP3MHFN) Standard Parts DCR (at 20 ) MSL Rated Current (Typ. : A) *1 Inductance Level T=40K L=30% Part No. Series L0 Tolerance Tolerance Typ. (max.) *2 *3 *4 *5 (H) (%) (%) PCC-M0530M-H 2.2 19.5 (21.45) 5.2 6.3 9.0 ETQP3M2R2HFP 1 5.55.03.0(mm) 20 20 ETQP3M100HFN 10.0 68.0 (74.8) 3.0 3.7 5.5 1 PCC-M0630M-H 22.0 144.0 (158.4) 2.1 2.5 4.0 6.56.03.0(mm) ETQP3M220HFN 1 *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also 5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 20 K/W measured. See also (5) *4: Saturation rated current : DC current which causes L(0) drop 30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used *6: Within a suitable application, the parts temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Reference) Inductance vs DC Current ETQP3M2R2HFP ETQP3M100HFN 2.5 12 10 2.0 8 1.5 6 1.0 4 0.5 2 0 0 0 1 2 3 4 5 6 7 8 9 0 2 4 6 8 10 12 14 DC Bias (A) DC Bias (A) ETQP3M220HFN 25 20 15 10 5 0 0 1 2 3 4 5 6 7 8 DC Bias (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Feb-20 Inductors (H) Inductors (H) Inductors (H)