EVE-JBHF1520B Panasonic

Encoders/EVEJB 12 mm Square GS Encoders with Push-on Switch Type: EVEJB Features Thin type encoder with vertical push-on switch Insulated shaft or metal shaft types are available Recommended Applications Volume and tone control for audio/visual and car audio equipment Tuner for communication units Mode selection for measurement instruments Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E V EJ B Product Code Specifications Combination of Shaft Output (Pulses) & Bushing Speci cations Rotation Angle 360 (Endless) Shaft Pull/Push Strength 80 N min. Mechanical Shaft Wobble 0.7 L/30 mm max. Rotation Torque 3 mNm to 20 mNm Detents 20 points Output Signals Phase A and B Resolution 20 pulses/360 Rating 1 mA 10 Vdc Contact Resistance 1 max. Electrical Chattering 2 ms max. Insulation Resistance 10 M min. (at 50 Vdc) Dielectric Withstanding Voltage 50 Vac for 1 minute Bouncing 5 ms max. Type SPST Push-on Rating 20 mA 16 Vdc Switch Part Contact Resistance 100 m max. Operating Force3 N, 6 N Travel 0.4 mm Encoder30000 cycles min. Operating Life Switch 15000 cycles min. Endurance Operating Temperature 10 C to +60 C Storage Temperature 40 C to +85 C Minimum Quantity/Packing Unit 100 pcs. Polyethylene Bag(Bulk) Quantity/Carton 500 pcs. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 EV52 +0.1 5-10 +0.1 5-10 Encoders/EVEJB Dimensions in mm (not to scale) ............................................. Standard rotation-torque / Bushing Type with Sleeve / with Switches With detents : EVEJBB No. 1 12.4 L1 13.2 8.0 5.0 L2 5.0 COM SW +0.1 2-20 50.05 0.4 Center of shaft 3.65 Operation stroke A B 5.0 Mounting surface Encoder Side PWB thickness : t=1.6 PWB mounting hole for reference (pitch tolerance : 0.1) View from mounting side ............................................. Standard rotation-torque / Bushing Type with Sleeve / with Switches With detents : EVEJBE No. 2 L1 12.4 13.2 8.0 5.0 L2 5.0 COM SW +0.1 2-20 50.05 0.3 Center of shaft A 3.65 Operation stroke B 5.0 Encoder Side Mounting surface PWB thickness : t=1.6 PWB mounting hole for reference (pitch tolerance : 0.1) View from mounting side Shaft Trims and Dimensions in mm Dimensions L1 Shaft Type L2 L1 L2 L3 Corner Cut L3 Metal 15.0 mm 4.0 mm 5.0 mm 0.5 mm 20.0 mm 7.0 mm 6.0 mm 1.5 mm Corner Cut Insulated 25.0 mm 9.0 mm 10.0 mm 1.5 mm Phase Difference Test Circuit Diagram Detent steady point 5Vdc 10 k 10 k OFF Signal A 10 k 10 k ON Signal A Signal B B A T1 T2 T3 T4 0.01 F 0.01 F OFF Encoder Signal B ON CW Phase difference T1,T2,T3,T4 COM (At rotational speed 60 r/min.) .............. Initial 3.5 m sec. min....... After life 2.5 m sec. min. Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Oct. 2012 EV53 C0.5 R4.5 R4.5 7.5 7.0 7.5 7.0 12.4 12.4 2-2.1 2-2.1 7.00.05 7.00.05 7.5 7.5 0 4.5 -0.1 0 6.0 -0.1 +0.1 +0.1 0 0