Soft-PGS (Compressible Type) PGS with low thermal resistance Soft-PGS (Compressible Type) PGS with low thermal resistance Type: EYGS Soft-PGS (Compressible Type) is a graphite sheet that is dedicated for use as a thermal interface material. The Soft-PGS (Compressible Type) has very high compressibility compared to standard PGS, which enables reducing the thermal resistance by following gap, warpage, and distortion of targets/substrates. Excellent heat resistance and reliability of the Soft-PGS help obtaining longer service life and higher performance of various components, such as power modules. The Soft-PGS (Compressible Type) is cost-saving, because it may allow you to reduce your existing processes. Unlike grease, there is no necessity for printing process , since it is a sheet-type product. There are no problems that are found in grease and phase change materials in the Soft-PGS, which makes it excellent TIM. Features 2 Thermal resistance : 0.2Kcm /W (600 kPa) To draw a good thermal resistance from sheet, pressure the Soft-PGS. A close adherence would make the product t into the uneven part and enhance the perfromance. Thermal conductivity : X-Y direction 400W/mK, Z direction (20W/mK) Compressibility : 40 % (600k Pa) High and long term reliability : operating temperature range 55 to 400 C After pressure RoHs compliant Recommended applications Install in IGBT module For cooling/heat transfer of electronic devices that generates heat, such as power modules. IGBT module Inverters and converters Soft-PGS Car-mounted camera, motor control unit, automotive LED, luminous source of laser HUD, medical equipment Heatsink Base station, Server Explanation of Part Numbers Soft-PGS(EYGSZL) 1 2 3 4 5 6 78 9 10 11 12 E Y G S0 9 18 Z L X 2 Sufx Product Code Style Dimension Thickness of Soft-PGS PGS Graphite sheet S PGS only 0909 90 mm 90 mm ZL 200 m 0918 90 mm 180 mm 1818 180 mm 180 mm Please contact us for custom-made products. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2016Soft-PGS (Compressible Type) PGS with low thermal resistance Typical characteristics Items Test method Condition Data Thickness ( m) 200 2 Thermal resistance (Kcm /W) TIM Tester 600 kPa 0.2 Compressibility (%) TIM Tester 600 kPa 40 X-Y 400 (300 to 600) Thermal conductivity (W/mK) Laser PIT Z TBD Operating temperature range (C) 55 to 400 Typical values, not guaranteed. Thermal resistance and compressibility 2.0 60 1.8 50 1.6 1.4 40 1.2 1.0 30 0.8 20 0.6 0.4 10 0.2 0 0 0 100 200 300 400 500 600 0 100 200 300 400 500 600 700 Pressure (kPa) Pressure (kPa) Lamination type/Composition example Soft-PGS (Compressible Type) standard form Sheet only Type S Type Process for IGBT mounting b Front a Structure Side c Operating 55 to 400 C Temperature Range Thickness: c 200 m 90 90 mm EYGS0909ZLX2 Standard 90 180 mm EYGS0918ZLX2 Part No. 180 180 mm EYGS1818ZLX2 Part numbers listed above are all standard samples for your consideration. Contact us for custom-made samples. We can make samples in various forms and/or dimensions other than standard samples. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2016 2 Thermal resistance (Kcm /W) Compressibility (%)