EZT-VKCTYP1HA Panasonic

Metallized Polypropylene Film Capacitor - Power electronic capacitor DC-Link Film Capacitor Standard TYPE1 Features High safety, Self-healing and Self-protecting function built in. No catastrophic failure upon natural end of life due to inbuilt fuse function. Open circuit failure mode by fuse function patterned electrode Can replace Electrolytic Capacitor Low ESR, High Ripple Current capability Low ESL Application Any automotive and/or other application requiring DC Linkage Verify the usage and fitting environments, and make sure to observe the rated performance specified in the corresponding specifications. Construction Dielectric : Polypropylene Electrode : Metallized dielectric with Segment pattern Plastic Case : PPS. equivalent to UL94 V-0 Sealing : Epoxy Resin equivalent to UL94 HB Terminal : Copper with Tin plating Product Part Number EZTVKCTYP1HA Specification Item Specification Operating Temperature on the Surface of the Case -40 C to +105 C including self heat generation Capacitance 581uF +10%/-5% 1kHz, 25 C Rated Voltage 450 VDC Maximum Voltage 600 VDC for 60 sec in life time Rated Ripple Current Continuous 80 Arms at 10kHz Current Derating Refer Fig.1 ESR 0.8m or less at 10KHz ESL 20 nH or less at 1MHz Insulation Resistance between Terminals and Case 1 G or more Measure after applying DC500+50/-0V for 2+2/-0 seconds. Dimensions L x W x H (Typical data) 164 x 115 x 43.1 mm : Excluding terminals Weight (Typical data) 980 g Note: 1) Voltage includes ripple voltage 2) Derate the current when the maximum surface temperature exceeds 95degC, as shown in Fig.1. Current Derating 100 90 95C 95 80 70 60 50 40 30 20 10 0 -4550 60 65 7 0 75 80 85 90 9 5 100 10 5 1 10 Temperature on the surface o f the capac itor housing () Fig.1Current derating curve Dimensions (in mm) Ripple current (Arms 10kHz) A rms 1 0 kHz