Non-polarized 1 Form C relay that realizes nominal HY RELAYS operating power of 150 mW FEATURES TYPICAL APPLICATIONS 1. Nominal operating power: 1. Telecommunications equipment High sensitivity of 150mW (Single 2. Security equipment side stable type) 3. Test and Measurement equipment A nominal operating power of 150 mW 4. Consumer electronic and Audio (minimum operating power of 84 mW) visual equipment has been achieved. 2. The use of gold-clad twin contacts ensures high contact reliability. 3. Sealed construction RoHS compliant ORDERING INFORMATION HY 1 Contact arrangement 1: 1 Form C Sensitivity Nil: High sensitivity 150 mW Z: Standard 200 mW Nominal coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Note: In case of 5 V drive circuit, it is recommended to use 4.5 V type relay. TYPES 150mW type 200mW type Contact Nominal coil arrangement voltage Part No. Part No. 1.5V DC HY1-1.5V HY1Z-1.5V 3V DC HY1-3V HY1Z-3V 4.5V DC HY1-4.5V HY1Z-4.5V 5V DC HY1-5V HY1Z-5V 1 Form C 6V DC HY1-6V HY1Z-6V 9V DC HY1-9V HY1Z-9V 12V DC HY1-12V HY1Z-12V 24V DC HY1-24V HY1Z-24V Standard packing: Tube: 50 pcs. Case: 2,000 pcs. ASCTB212E 201503-T 1HY RATING 1. Coil data Nominal operating Max. applied Contact Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating current voltage arrangement voltage (at 20C 68F) (at 20C 68F) 10% (at 20C 68F) power 10% (at 20C 68F) (at 70C 158F) 1.5V DC 100mA 15 3V DC 50mA 60 4.5V DC 33.3mA 135 75%V or less of 10%V or more of 5V DC 30mA 166 140%V of nominal voltage nominal voltage 150mW nominal voltage 6V DC 25mA 240 (Initial) (Initial) 9V DC 16.7mA 540 12V DC 12.5mA 960 24V DC 6.25mA 3,840 1 Form C 1.5V DC 133.3mA 11.25 3V DC 66.7mA 45 4.5V DC 44.5mA 101.2 75%V or less of 10%V or more of 5V DC 40mA 125 120%V of nominal voltage nominal voltage 200mW nominal voltage 6V DC 33.3mA 180 (Initial) (Initial) 9V DC 22.2mA 405 12V DC 16.7mA 720 24V DC 8.3mA 2,880 2. Specications Characteristics Item Specications Arrangement 1 Form C Contact Initial contact resistance, max. Max. 100 m (By voltage drop 6 V DC 1A) Contact material Ag+Au clad Nominal switching capacity 1 A 30 V DC (resistive load) Max. switching power 30 W (DC) (resistive load) Max. switching voltage 60 V DC Rating Max. carrying current 2 A Max. switching current 1 A (30 V DC) 1 Min. switching capacity (Reference value)* 1mA 1 V DC Nominal operating power 150/200mW Min. 100M (at 500V DC) Insulation resistance (Initial) Measurement at same location as Initial breakdown voltage section. Between open contacts 500 Vrms for 1min. (Detection current: 10mA) Breakdown voltage (Initial) Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA) Electrical Max. 50C characteristics Temperature rise (at 20C 68F) (By resistive method, nominal coil voltage applied to the coil, nominal switching capacity.) Operate time Set time (at 20C 68F) Max. 5 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) Release time Reset time (at 20C 68F) (without diode) 2 Functional Min. 98 m/s (Half-wave pulse of sine wave: 11 ms detection time: 10s.) Shock resistance 2 Destructive Min. 980 m/s (Half-wave pulse of sine wave: 6 ms.) Mechanical characteristics Functional 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10s.) Vibration resistance Destructive 10 to 55 Hz at double amplitude of 2 mm 7 Mechanical Min. 10 (at 180 cpm) Expected life 5 Electrical Min. 10 (1 A 30 V DC resistive) (at 20 cpm) Ambient temperature: 40C to +70C 40F to +158F 2 Conditions for operation, transport and storage* Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Conditions Max. operating speed (at rated load) 20 cpm Unit weight Approx. 1.8 g .063 oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. ASCTB212E 201503-T 2