JMVDE
Ideal for compressor
and motor control
JM RELAYS
Inrush 80A,
1a 20A power relay
FEATURES
Compact, high-capacity, and Conforms to the various safety
resistant to inductive loads standards
It can control an inductive load with UL, CSA, VDE available
inrush current of 80 A and steady The line up can support economical
state current of 20 A. mounting methods.
Excellent contact welding resistance The relay are equipped with a drive
Flat type
High contact pressure, a forced opening terminal (coil terminal) on one side for
mechanism, and a forced wiping PCBs, and a load terminal (tab terminal
mechanism realizes an excellent contact #250) on the reverse side. The line up
welding resistance. includes the TM type which can be
High breakdown voltage and surge attached directly to the PCB composing a
resistant relay drive circuit, and the TMP type which
More than 6.4 mm .252 inch maintained supports economical wiring. The TMP
type can also be directly attached, and a
for the insulation distance between
high capacity load can be wired to the tab
contacts and coil, and the breakdown
terminal.
voltage between contacts and coil is
Slim type
5,000 V for 1 minute. In addition, the
surge resistance between contacts and
TYPICAL APPLICATIONS
coil is greater than 10,000 V.
Resistant to external force Compressor and heater control in
An absorber mechanism is used on the air conditioners
load terminals, giving a large Power control in hot air type heaters
improvement in characteristics variations Magnetron control in microwave
caused by the external force during ovens
FASTON placement/removal. Lamp and motor control in
Flux resistance mechanism OA equipment such as copiers and
The terminal area is plugged with resin to facsimiles.
prevent ux seepage during PCB
RoHS compliant
mounting. (TMP type)
ORDERING INFORMATION
JM 1a N F
JM relay
Contact arrangement
1a: 1 Form A
Pickup voltage
N: 70% of nominal voltage
Classification of type
Nil: Slim type
Z: Flat type
Mounting classification
TMP: TMP type
TM: TM type (Flat type)
P: PCB type (Slim type)
Nominal coil voltage
DC5V, DC6V, DC9V, DC12V, DC24V, DC48V
Contact material
F: AgSnO2 type
Note: Certified by UL, CSA and VDE
ASCTB184E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/JM
TYPES
Part No.
Nominal coil voltage
TMP type (Flat) TM type (Flat) TMP type (Slim) PCB type (Slim)
5V DC JM1aN-ZTMP-DC5V-F JM1aN-ZTM-DC5V-F JM1aN-TMP-DC5V-F JM1aN-P-DC5V-F
6V DC JM1aN-ZTMP-DC6V-F JM1aN-ZTM-DC6V-F JM1aN-TMP-DC6V-F JM1aN-P-DC6V-F
9V DC JM1aN-ZTMP-DC9V-F JM1aN-ZTM-DC9V-F JM1aN-TMP-DC9V-F JM1aN-P-DC9V-F
12V DC JM1aN-ZTMP-DC12V-F JM1aN-ZTM-DC12V-F JM1aN-TMP-DC12V-F JM1aN-P-DC12V-F
24V DC JM1aN-ZTMP-DC24V-F JM1aN-ZTM-DC24V-F JM1aN-TMP-DC24V-F JM1aN-P-DC24V-F
48V DC JM1aN-ZTMP-DC48V-F JM1aN-ZTM-DC48V-F JM1aN-TMP-DC48V-F JM1aN-P-DC48V-F
Standard packing: Carton 50 pcs., Case 200 pcs.
RATING
1. Coil data
Nominal operating
Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage
current
voltage (at 20C 68F) (at 20C 68F) [10%] (at 20C 68F) power (at 60C 140F)
[10%] (at 20C 68F)
5V DC 180 mA 27.8
6V DC 150 mA 40
70%V or less of 10%V or more of
9V DC 100 mA 90
110%V of
nominal voltage nominal voltage 900mW
nominal voltage
12V DC 75 mA 160
(Initial) (Initial)
24V DC 37.5 mA 640
48V DC 18.75mA 2,560
2. Specications
Characteristics Item Specications
Contact material AgSnO2 type
Contact Arrangement 1 Form A
Contact resistance (Initial) Max. 100 m (By voltage drop 6 V DC 1A)
Nominal switching capacity (resistive load) 20A 250V AC
Max. switching power (resistive load) 5,000VA
Rating Max. switching voltage 250V AC
Max. switching current 20A
1
Min. switching capacity (reference value)* 100mA, 5V DC
Insulation resistance (Initial) Min. 100M (at 500V DC) Measurement at same location as Breakdown voltage section.
Between open contacts 1,000 Vrms for 1 min. (Detection current: 10 mA)
Breakdown voltage
(Initial)
Between contact and coil 5,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 55C 131F (By resistive method, nominal coil voltage applied to coil: 100%V,
Electrical Temperature rise (coil)
contact carrying current: 20A, at 60C 140F)
characteristics
2
Surge breakdown voltage*
10,000 V
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20C 68F) Max. 20 ms (excluding contact bounce time.)
Release time (at nominal voltage) (at 20C 68F) Max. 10 ms (excluding contact bounce time) (Without diode)
2
Functional 98 m/s (Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Shock resistance
2
Destructive 980 m/s (Half-wave pulse of sine wave: 6 ms.)
Mechanical
characteristics
Functional 10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.)
Vibration resistance
Destructive 10 to 55 Hz at double amplitude of 2 mm
6
Mechanical (at 180 times/min.) Min. 10
Expected life
5
Electrical (at 20 times/min.) Min. 10 (at nominal switching capacity)
Ambient temperature: 40C to +60C 40F to +140F,
3
Conditions for operation, transport and storage*
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Max. operating speed 20 times/min. (at nominal switching capacity)
Slim TMP and Slim PCB: Approx. 28 g .99 oz
Unit weight Flat TMP: Approx. 30 g 1.06 oz
Flat TM: Approx. 30 g 1.06 oz
* Specications will vary with foreign standards certication ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Switching capacity
20 A, 250 V AC
5
Resistive load 10 (at 20 times/min.)
(cos = 1)
Inrush 70 A, Steady 20 A
5
Electrical Life 10 (at 20 times/min.)
(250 V AC cos = 0.7)
Inductive load (cos = 0.7)
Inrush 80 A, Cut-off 80 A (When the motor is locked)
3
1.510 (at 20 times/min.)
(250 V AC cos = 0.7)
1
Note: Standard UL and CSA 1HP, 20A 250VAC 1 /2HP, 20A 125VAC
ASCTB184E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/