JV-N COMPACT FLAT POWER RELAY FOR JV-N RELAYS HEATER LOADS FEATURES COMMENTS ABOUT 16 22 .630 High 16 A capacity .866 Cd FREE The contacts are high capacity 16A, 10.9 We have introduced Cadmium free type .429 125 V AC. products to reduce the material which is Compact, flat type with low 10.9 mm not good for our environment. (The suffix .429 inch height F should be added to the part number.) Compact flat type with low surface area If you are still using Cadmium containing of 16 22 mm .630 .866 inch and parts, which dont have F on the suffix height of 10.9 mm .429 inch. of the part number, please use Cadmium High sensitivity at 200 mW free parts from now on. The life of the High sensitivity at 200 mW coil power Cadmium free parts may be shorter than consumption. the Cadmium containing parts based on Represses contact terminal heat the load condition, so please evaluate the The contact terminals are larger and Cadmium free parts with your actual thicker compared to the existing JV relay. application before use. This limits the rise in temperature of the terminals when there is a large current flowing to approx. 28C 62F (normal current of 16 A). Conforms to the various safety standards UL/CSA, TV approved. SPECIFICATIONS Characteristics Contact Max. operating speed 20 cpm Arrangement 1 Form A Max. 12 ms (DC 4.5 V to 48 V) Initial contact resistance, max. 1 Operate time* (at nominal voltage) Max. 100 m Max. 8 ms (DC 100 V) (By voltage drop 6 V DC 1 A) 2 Release time* (at nominal voltage) Max. 5 ms Contact material AgSnO2 type Initial insulation resistance Min. 1,000 M (at 500 V DC) 16 A 125 V AC, 10 A 277 V Nominal switching AC 10 A 30 V DC, 10 A 125 V Between open Initial breakdown capacity 1,000 Vrms for 1 min. AC contacts voltage Rating Max. switching power 2,770 VA, 300 W (Detection Between contacts (resistive 2,500 Vrms for 1 min. current: 10 mA and coil load) Max. switching voltage 277 V AC, 30 V DC Surge voltage between contact and Max. switching current 16 A (AC 125 V), 10 A (DC) Min. 4,500 V coil 1 Min. switching capacity 100 mA, 5 V DC Max. 45 C (DC 4.5 V to 48 V) Expected life (min. ope.) Temperature rise 3 4 7 * Max. 55C (DC 100 V)* 2 10 Mechanical (at 180 cpm) Ambient temperature Sealed type 40 to 70C 40 to 158 F Electrical 5 16 A 125 V AC, 10 (DC 4.5 to 48 V) at resistive 10 A 30 V DC 40 to 60C 40 to 140 F load Conditions in case of operation, Flux-resistant type (DC 100V) (at 20 cpm) 5 8 3 10 transport and storage* 10 A 125 V AC Humidity: 5 to 85 % R.H. (Note freezing and condensing Coil at low temperature) Air pressure: 86 to 106 kPa 200 mW (DC 4.5 to 48 V) Nominal operating power 600 mW (DC 100 V) 2 5 Functional Min. 200 m/s 20G * Shock resistance 1 This value can change due to the switching frequency, environmental conditions, 2 6 Destructive Min. 1,000 m/s 100G * and desired reliability level, therefore it is recommended to check this with the 7 10 to 55 Hz * actual load. Functional at double amplitude of 1.6 mm Vibration Remarks resistance * Specifications will vary with foreign standards certification ratings. 10 to 55 Hz at double Destructive 1 * Excluding contact bounce time amplitude of 2 mm 2 * Excluding contact bounce time, without diode Unit weight Approx. 8g .28 oz 3 * By resistive method nominal voltage applied to the coil contact carrying current: 16A, at 70C 158 F 4 * Nominal voltage applied to the coil, at 60C 140F 5 * Half-wave pulse of sine wave: 11 ms detection time: 10 s 6 * Half-wave pulse of sine wave: 6 ms 7 * Detection time: 10 s 8 * Refer to 6. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information. ds 61B07 en jvn: 010611J 1JV-N TYPICAL APPLICATIONS ORDERING INFORMATIONS 1a Ex. JVN F 4.5 V F AV equipment: TVs, VTRs, etc. OA equipment HA equipment Contact arrangement Protective construction Coil voltage (DC) Contact material 1a: 1 Form A Nil: Sealed type 4.5, 6, 9, 12,18, F: AgSnO2 type F: Flux-resistant type 24, 48, 100 V UL/CSA, TV approved type is standard. Please inquire about the previous products (Cadmium containing parts). TYPES AND COIL DATA (at 20C 68 F) Part No. Nominal Nominal Max. Nominal Pick-up Drop-out Coil operating operating allowable voltage, voltage voltage resistance, Flux-resistant current, power, voltage, Sealed type V DC V DC (max.) V DC (min.) W (10%) type mA ( 10%) mW V DC JVN1a-4.5V-F JVN1aF-4.5V-F 4.5 3.375 0.23 101 44.4 200 6.75 JVN1a-6V-F JVN1aF-6V-F 6 4.5 0.3 180 33.3 200 9 JVN1a-9V-F JVN1aF-9V-F 9 6.75 0.45 405 22.2 200 13.5 JVN1a-12V-F JVN1aF-12V-F 12 9 0.6 720 16.7 200 18 JVN1a-18V-F JVN1aF-18V-F 18 13.5 0.9 1,620 11.1 200 27 JVN1a-24V-F JVN1aF-24V-F 24 18 1.2 2,880 8.3 200 36 JVN1a-48V-F JVN1aF-48V-F 48 36 2.4 11,520 4.2 200 72 JVN1a-100V-F JVN1aF-100V-F 100 60 4 16,600 6 600 110 DIMENSIONS(mm inch) Download CAD DataCAD Data from our Web site. 22 16 CAD Data PC board pattern .866 .630 2-0.9 dia. 17.78 2-.035 dia. 10.5 .700 0.4 .413 .016 4 .157 12.7 1.0 .500 .039 1.6 0.5 COM .063 .020 NO 17.78 .700 (R) (R) 2.0 2.0 12.7 .079 10.16 .079 .500 .400 Dimension: General tolerance Max. 1mm .039 inch: 0.2 .008 1 to 5mm .039 to .197 inch: 0.3 .012 10.16 Min. 5mm .197 inch: 0.4 .016 .400 REFERENCE DATA 1. Max. switching power 2. Operate/release time 3. Coil temperature rise Sample: JVN1aF-12 V-F, 6 pcs. Sample: JVN1aF-12 V-F, 6 pcs. point measured: coil inside Contact current: 16 A 10 100 9 50 8 AC resistive load 16 7 Ambient temperature 30C 10 40 operate time 6 5 30 Max. 4 x Ambient temperature 70C 1 Min. 20 3 release time 2 Max. 10 x Min. 1 0 0 10 100 1,000 80 100 120 140 160 80 100 120 140 160 Contact voltage, V Coil applied voltage, %V Coil applied voltage, %V 2 ds 61B07 en jvn: 010611J Contact current, A operate & release time, ms Temperature rise, C