MCBSTM32F400
The Keil MCBSTM32F400 Evaluation Board enables you to create and test working programs
based on the STMicroelectronics STM32 F4xx series of ARM Cortex-M4 processor-based
devices.
Features
168MHz STM32F407IG ARM Cortex-M4 processor-based MCU in 176-pin BGA
On-Chip Memory: 1MB Flash & 192KB RAM
2
External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I C EEPROM
with NFC interface
2.4 inch Color QVGA TFT LCD with resistive touchscreen
10/100 Ethernet Port
USB 2.0 Full Speed - USB, USB-OTG, & USB Host
USB 2.0 High Speed - USB, USB-OTG, & USB Host
1 CAN Interface
Serial/UART Port
MicroSD Card Interface
5-position Joystick
3-axis digital Accelerometer
3-axis digital Gyroscope
Analog Voltage Control for ADC Input (potentiometer)
Audio CODEC with Line-In/Out and Speaker/Microphone
Digital Microphone
Digital VGA Camera
Push-Buttons for Reset, Wakeup, Tamper and User
8 LEDs directly connected to port pins
Power Supply via:
High Speed and Full Speed USB (micro) connectors
Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)
Debug Interface Connectors
20 pin JTAG (0.1 inch connector)
10 pin Cortex debug (0.05 inch connector)
20-pin Cortex debug + ETM Trace (0.05 inch connector) Evaluation Software
The MCBSTM32F400 Evaluation Board and Starter Kit include the MDK-Lite development
tools. These tools help you get started writing programs and testing the microcontroller and
its capabilities. Sample applications that run on the MCBSTM32F400 and a Quickstart guide
are included.
Ordering Information
The MCBSTM32F400 is available as a stand alone evaluation board or as a starter kit which
includes the ULINK-ME debug adapter.
MCBSTM32F400: MCBSTM32F400 evaluation board
MCBSTM32F400UME: MCBSTM32F400 starter kit (includes ULINK-ME)