PM4S-A2C10M-DC24V Panasonic

PM4S PM4S MULTI-RANGE ANALOG TIMER Timers Features 1. Economic pricing that promptly 4. Equipped with zero-setting reects market demands instantaneous output Remarkable economic pricing is Set the dial all the way to 0 for implemented in pursuit of cost instantaneous operation, so circuit performance. testing can be easily accomplished. 2. Output contacts switchable 5. Compliant with UL, c-UL and CE. between timed out 2C and timed out 1C/Instantaneous 1C The timed out 1C/Instantaneous 1C output contact enables the efcient addition of self-maintenance circuits. RoHS Directive compatibility information 3. 4 different time ranges selectable PM4S Specications Type PM4S Multi-range Timer Item Rated operating voltage 100 to 120V AC 200 to 240V AC 12V DC 24V DC Rated frequency 50/60 Hz Approx. 3.0VA/3.6VA Approx. 5.6VA/6.8VA (at 100V AC) (at 200V AC) Rated power consumption Approx. 1.3W Approx. 1.7W Approx. 4.5VA/5.25VA Approx. 7.5VA/9.8VA (at 120V AC) (at 240V AC) Output rating 5A 250V AC (resistive load) Rating Operating mode Power ON-delay A type 1s/10s/1min/10min (4 time ranges selectable) B type 3s/30s/3min/30min (4 time ranges selectable) Time range C type 6s/60s/6min/60min (4 time ranges selectable) D type 1min/10min/1h/10h (4 time ranges selectable) E type 3min/30min/3h/30h (4 time ranges selectable) Operating time uctuation 1% (power off time change at the range of 0.1s to 1h) Setting error 5% (Full-scale value) Time accuracy Note) Voltage error 1% (at the operating voltage changes between 85 to 110%) Temperature error 2% (at 20C ambient temp. at the range of 10 to +50C +14 to +122F) T.D.: Timed-out 2 Form C Contact arrangement INST.: Timed-out 1 Form C, instantaneous 1 Form C (Selected by front switch) Contact Contact resistance (Initial value) Max. 100m (at 1A 6V DC) Contact material Silver alloy 7 Mechanical (contact) Min. 10 Life 5 Electrical (contact) Min. 10 (at raed control capacity) Allowable operating voltage range 85 to 110% of rated operating voltage Min. 100M Between live and dead metal parts (At 500V DC) Between input and output Insulation resistance (Initial value) Between contacts of different poles Between contacts of same pole Electrical function 2,000Vrms for 1 min Between live and dead metal parts 2,000Vrms for 1 min Between input and output Breakdown voltage (Initial value) 2,000Vrms for 1 min Between contacts of different poles 1,000Vrms for 1 min Between contacts of same pole Min. power off time 100 ms Max. temperature rise 55C 131F Functional 10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes) Vibration resistance Destructive 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes) Mechanical function 2 Functional Min. 98m/s (4 times on 3 axes) Shock resistance 2 Destructive Min. 980m/s (5 times on 3 axes) Ambient temperature 10 to +50C +14 to +122F Ambient humidity 30 to 85%RH (non-condensing) Operating condition Atmospheric pressure 860 to 1,060hPa Ripple factor (DC type) 20% Others Weight Approximately 110 g 3.880 oz Notes) 1. Unless otherwise specied, the measurement conditions at the maximum scale time standard are specied to be the rated operating voltage (within 5% ripple factor for DC), 20C 68F ambient temperature, and 1s power off time. 2. For the 1s range, the tolerance for each specication becomes 10ms. Applicable standard Safety standard EN61812-1 Pollution Degree 2/Overvoltage Category III (EMI)EN61000-6-4 Radiation interference electric eld strength EN55011 Group1 ClassA Noise terminal voltage EN55011 Group1 ClassA (EMS)EN61000-6-2 Static discharge immunity EN61000-4-2 4 kV contact 8 kV air RF electromagnetic eld immunity EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz) 10 V/m pulse modulation (895 MHz to 905 MHz) EMC EFT/B immunity EN61000-4-4 2 kV (power supply line) Surge immunity EN61000-4-5 1 kV (power line) Conductivity noise immunity EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz) Power frequency magnetic eld immunity EN61000-4-8 30 A/m (50 Hz) Voltage dip/Instantaneous stop/Voltage uctuation immunity EN61000-4-11 10 ms, 30% (rated voltage) 100 ms, 60% (rated voltage) 1,000 ms, 60% (rated voltage) 5,000 ms, 95% (rated voltage) All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.