PM-L25-P

Amplifier Built-in / U-shaped Micro Photoelectric Sensor Ultra-small / Cable type SERIES PM-25 Compact / Cable type PM-45 SERIES Compact / Connector built-in type PM-65 SERIES Conforming to Certified EMC Directive (Some models only) PM-25 SERIES PM-45 SERIES PM-65 SERIES Ultimate U-shaped micro photoelectric sensors One Step Ahead in Performance and Mounting Ease * * Industrys First and Industrys Top-in-Class Translate to the Most * As of November 2015, according to our companys survey APPLICATIONS Advanced Sensors in the Industry. * Positioning of a pallet Ample beam emitting / receiving * distance of 6 mm 0.236 in Three protection circuits standard PM-25 SERIES PM-45 SERIES PM-65 SERIES Industrys first on all models The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than PM-25 SERIES PM-45 SERIES PM-65 SERIES Industrys first those on our conventional models while their external dimensions are the same. As a result, the distance between the beam emitting point and All models are standardly equipped with the following receiving point increased by 1 mm 0.039 in. The wider distance means protection circuits in their compact bodies. These protection less possibility of collision between the sensing section and sensing object. circuits minimize the possibility of sensor malfunctions caused by erroneous wiring. 13.4 0.528 Pallet is stopped by sensing the dog*. 6 0.236 3.7 0.146 Reverse supply polarity protection circuit 1 Sensing the starting point and overrun of a moving body 6 mm 0.236 in Overrun sensing 2 Reverse output polarity protection circuit Dog 3 Output short-circuit protection circuit (Unit: mm in) Starting point sensing * * Industrys first Overrun sensing Beam marks for easy adjustment IP64 rating PM-25 SERIES PM-45 SERIES PM-65 SERIES Starting point and overrun is PM-25 SERIES PM-45 SERIES Industrys first Industrys first sensed using the dog* on the base. Our original integrated molding method has The upper-limit and lower-limit positions of beam can be visually Sensing the starting point on a rotating body eliminated grooves and gaps on the sensing surface confirmed from the front, back, right and left sides of the sensor unit. Starting and main body, thus reducing the possibility of This allows easy adjustment of the position of sensing object. point malfunctions caused by splashing water or dust. The starting Upper-limit position point can be Beam width of beam axis sensed by Beam width marks are provided on making a slit in Lower-limit position the rotating of beam axis PM25 series and PM45 series. body. No ridges on sensing surface * Dog refers to the sensing object for activating the sensors detecting operation. No joint seam < Front / back > < Right / left > * Look Large and easy to see Sensors come in various shapes to suit a wide range of mounting conditions All models easy to Multi-angle operation indicator Industrys Ultra-small / Cable type PM-25 SERIES PM-45 SERIES PM-65 SERIES top-in-class mount with M3 screws PM-25 SERIES Easy mounting with M2 / M3 screws PM-25 SERIES PM-45 SERIES PM-65 SERIES The large operation indicator (orange) lights up when the beam enters. The indicator is easy to see from The sensor unit can be installed with one or above and from the sides. two M3 screws. * M3 screws and washers are not included. PM-K25 PM-L25 PM-U25 PM-F25 PM-R25 * Models requiring one M3 screw for installation PM-F25, PM-R25, PM-F65, PM-R65 Models requiring two M3 screws for installation Compact / Cable type Compact size Compact size PM-45 SERIES Industrys Models other than above PM-45 SERIES top-in-class All new models require significantly less mounting space Resistant to vibrations than our conventional models when mounted with the same pitch. What s more, the new models can directly and impacts PM-K45 PM-T45 PM-L45 PM-Y45 PM-F45 PM-R45 replace our conventional models currently in use. PM-25 SERIES PM-45 SERIES PM-65 SERIES Compact / Connector The sections where stress Easy connection with a single touch using commercially-available connectors PM-L45 Conventional PM-65 SERIES built-in type concentrates, such as the model (L type) connecting section of the cable and internal circuit, are 15.5 0.610 14.6 0.575 covered with a resin. This 26 1.024 helps prevent malfunctions 10 18.5 0.728 26 1.024 PM-K65 PM-T65 PM-T65W PM-L65 PM-Y65 PM-F65 PM-F65W PM-R65 PM-R65W 0.394 caused by vibrations and Resin-filled structure (Unit: mm in) impacts. (cross-sectional view) 2