SFS6-SFD Panasonic

SF RELAYS ACCESSORIES Slim type (Sockets and DIN rail terminal sockets) TYPES 1. Sockets Type No. of poles Part No. 4 poles SFS4-PS PC board sockets 6 poles SFS6-PS Standard packing: Carton: 10 pcs. Case: 100 pcs. 2. DIN rail terminal socket Type No. of poles Part No. 4 poles SFS4-SFD-R Terminal sockets for spade and ring tongue terminals 6 poles SFS6-SFD-R Standard packing: Carton: 10 pcs. Case: 100 pcs. Note: For previous products (spade tongue terminal dedicated terminal sockets), please order SFS4-SFD for 4 poles and SFS6-SFD for 6 poles. RATING Specications Item Specications Breakdown voltage (Initial) Between each terminal: 2,500 Vrms for 1 min. (Detection current: 10mA) Insulation resistance (Initial) Min. 1,000M (at 500V DC) Measurement at same location as Breakdown voltage section. Max. carrying current 6 A (Reduce by 0.1 A/C for temperatures 70 to 85C 158 to 185F) The CAD data of the products with a CAD Data mark can be downloaded from: SFS ACCESSORIES 2. PC board sockets (6 poles) (SFS6-PS) External dimensions PC board pattern (Bottom view) CAD Data 60.0 49.9 3-3.2 dia..126 2.362 1.965 10.16 (For M3 screw) 4.1 24.8 .400 .161 .976 Please use the screw with a stem length of 15.0 8 mm .315 inch591 14-1.1 .043 dia. (6.93) (.273) 13.97 .550 5.08 .200 5.08 .200 5.08 .200 40.0 1.575 11.43 .450 5.08 .200 Tolerance: 0.1 .004 (13) (13) (.512) (.512) 0.8 6.93 0.4 .016 .031 .273 13.97 10.16 .550 5.08 .400 .200 5.08 .200 5.08 .200 11.43 .450 5.08 .200 General tolerance: 0.3 .012 Schematic (Bottom view) 1 374 8 1112 1 374 8 1112 1 374 8 1112 Standard 2 56 9 10 13 14 2 56 9 10 13 14 2 56 9 10 13 14 (When 4 Form A 2 Form B mounted) (When 5 Form A 1 Form B mounted) (When 3 Form A 3 Form B mounted) 1 374 8 1112 1 374 8 1112 1 374 8 1112 With LED indication 2 56 9 10 13 14 2 56 9 10 13 14 2 56 9 10 13 14 (When 4 Form A 2 Form B mounted) (When 5 Form A 1 Form B mounted) (When 3 Form A 3 Form B mounted) 1 374 8 1112 1 374 8 1112 1 374 8 1112 With diode and LED indication type 2 56 9 10 13 14 2 56 9 10 13 14 2 56 9 10 13 14 (When 4 Form A 2 Form B mounted) (When 5 Form A 1 Form B mounted) (When 3 Form A 3 Form B mounted) 3. Terminal socket for spade and ring tongue terminals (For 4 poles nger protect type) CAD Data External dimensions Mounting hole dimensions 6.5 2-M3.5 or 4 dia. hole .256 2-M.138 or .157 dia. hole R2.0 .079 14.50.2 M3 screw.118 .571.008 6.20.3 dia. 75.0 .244.012 dia. 2.953 80.00.2 3.150.008 2-45 hole 6.5 .256 +0.3 6.3 0 +.012 .248 0 Tolerance: 0.1 .004 Schematic (Top view) 58.9 *62.4 2.319 *2.457 10 7 8 9 6 4.0 35.4 22.4 .157 1.394 5 .882 4 General tolerance: 0.5 .020 * Reference value (when using DIN rail ATA48011) 3 2 1 Note: Ring tongue terminals cannot be used with conventional DIN rail terminal socket (SFS4-SFD). In use of a ring tongue terminals, please use SFS4-SFD-R. ASCTB111E 201407-T 2