TQ SMD LOW-PROFILE TQ SMD RELAYS SURFACE-MOUNT RELAY FEATURES 9 14 .354 .551 Low-profile: 6 mm .236 inch 5.6 .220 (Tape height: max. 6.5 mm .256 inch) Tape and reel package is available as standard packing style Surge withstand between contacts and coil: 2,500 V mm inch Breakdown voltage between contacts and coil: 1,500 V Capacity: 2 A High sensitivity: 2 Form C 140 mW power consumption (Single side stable type) SPECIFICATIONS Contact Characteristics 1 Arrangement 2 Form C Initial insulation resistance* Min. 1,000 M (at 500 V DC) Initial contact resistance, max. Between open 1,000 Vrms for 1 min. 75 m (By voltage drop 6 V DC 1 A) contacts (Detection current: 10 mA) Initial Contact material Au-clad AgNi type 1,500 Vrms for 1 min. breakdown Between contact sets (Detection current: 10 mA) Nominal switching capacity 2 A 30 V DC, voltage (resistive load) 0.5 A 125 V AC Between contact and 1,500 Vrms for 1 min. coil (Detection current: 10 mA) Max. switching power 60 W, 62.5 VA (resistive load) Between open Rating contacts 1,500 V (FCC Part 68) Max. switching voltage 220 V DC, 125 V AC Initial surge (10160 s) Max. switching current 2 A voltage Between contacts and 2,500 V (Telcordia) Min. switching capacity coil (210 s) 10 A 10 mV DC 1 (Reference value) 2 Temperature rise* (at 20C) Max. 50 C 140 mW (1.5 to 12 V DC) 3 Operate time Set time * (at 20C) Max. 4 ms Max. 4 ms Single side stable 200 mW (24 V DC) 4 300 mW (48 V DC) Release time Reset time * Nominal Max. 4 ms Max. 4 ms (at 20 C) operating 70 mW (1.5 to 12 V DC) 1 coil latching 5 2 power 100 mW (24 V DC) Functional* Min. 750 m/s 75 G Shock resistance 6 2 140 mW (1.5 to 12 V DC) Destructive* Min. 1,000 m/s 100 G 2 coil latching 200 mW (24 V DC) 2 200 m/s 20G , 10 to 55 Hz 7 Functional* 8 Mechanical (at 180 cpm) 10 at double amplitude of 3.3 mm Vibration resistance 2 2 A 30 V DC 294 m/s 30G , 10 to 55 Hz 5 10 Destructive resistive at double amplitude of 5 mm Expected life (min. 3 Electrical 1 A 30 V DC Conditions for Ambient 40C to +85C* 5 2 10 operations) (at 20 cpm) resistive operation, transport temperature 40F to +185 F 8 and storage* 0.5 A 125 V 5 10 (Not freezing and AC resistive Humidity 5 to 85% R.H. condensing at low Note: temperature) 1 This value can change due to the switching frequency, environmental conditions, Unit weight Approx. 2 g .071 oz and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching 10V DC, 10mA max. level ) Remarks * Specifications will vary with foreign standards certification ratings. 1 * Measurement at same location as Initial breakdown voltage section. 2 * By resistive method, nominal voltage applied to the coil contact carrying current: 2 A. 3 * Nominal voltage applied to the coil, excluding contact bounce time. 4 * Nominal voltage applied to the coil, excluding contact bounce time without diode. 5 * Half-wave pulse of sine wave: 6 ms detection time: 10 s 6 * Half-wave pulse of sine wave: 6 ms 7 * Detection time: 10 s 8 * Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (p. 19, Relay Technical Information). ds 61020 en tqsmd: 010611J 1TQ SMD ORDERING INFORMATION Ex. TQ 2SA--L 3V - Z Contact arrangement Surface-mount availability Operating function Coil voltage (DC) Packing style 2: 2 Form C SA: Standard surface-mount Nil: Single side stable 1.5, 3, 4.5, 5, 6, Nil: Tube packing SA: terminal type L: 1 coil latching 9, 12, 24, 48* V Z: Tape and reel packing (pick- SL: High connection reliability L2: 2 coil latching ed from the 6/7/8/9/10-pin side) SA: surface-mount terminal type SS: Space saving surface- SA: mount terminal type *48 V coil type: Single side stable only Notes: 1. Tape and reel (picked from 1/2/3/4/5-pin side) is also available by request. Part No. suffix -X is needed when ordering. (ex.) TQ2SA-3V-X 2. Tape and reel packing symbol -Z or -X are not marked on the relay. TYPES 1. Single side stable Nominal Nominal Drop-out Nominal Max. allowable Pick-up voltage, operating Coil resistance, Part No. voltage, voltage, operating power, voltage, V DC (max.) current, ( 10%) V DC V DC (min.) mW V DC mA ( 10%) TQ2S-1.5 V 1.5 1.13 0.15 93.8 16 140 2.2 TQ2S-3 V 3 2.25 0.3 46.7 64.3 140 4.5 TQ2S-4.5 V 4.5 3.38 0.45 31 145 140 6.7 TQ2S-5 V 5 3.75 0.5 28.1 178 140 7.5 TQ2S-6 V 6 4.5 0.6 23.3 257 140 9 TQ2S-9 V 9 6.75 0.9 15.5 579 140 13.5 TQ2S-12 V 12 9 1.2 11.7 1,028 140 18 TQ2S-24 V 24 18 2.4 8.3 2,880 200 36 TQ2S-48 V 48 36 4.8 6.3 7,680 300 57.6 2. 1 coil latching Nominal Nominal Nominal Max. allowable Set voltage, Reset voltage, operating Coil resistance, Part No. voltage, operating power, voltage, V DC (max.) V DC (max.) current, ( 10%) V DC mW V DC mA ( 10%) TQ2S-L-1.5 V 1.5 1.13 1.13 46.9 32 70 2.2 TQ2S-L-3 V 3 2.25 2.25 23.3 128.6 70 4.5 TQ2S-L-4.5 V 4.5 3.38 3.38 15.6 289.3 70 6.7 TQ2S-L-5 V 5 3.75 3.75 14 357 70 7.5 TQ2S-L-6 V 6 4.5 4.5 11.7 514 70 9 TQ2S-L-9 V 9 6.75 6.75 7.8 1,157 70 13.5 TQ2S-L-12 V 12 9 9 5.8 2,057 70 18 TQ2S-L-24 V 24 18 18 4.2 5,760 100 36 3. 2 coil latching Nominal Nominal Nominal Max. allowable Set voltage, Reset voltage, operating Coil resistance, Part No. voltage, operating power, voltage, V DC (max.) V DC (max.) current, ( 10%) V DC mW V DC mA ( 10%) TQ2S-L2-1.5 V 1.5 1.13 1.13 93.8 16 140 2.2 TQ2S-L2-3 V 3 2.25 2.25 46.7 64.3 140 4.5 TQ2S-L2-4.5 V 4.5 3.38 3.38 31 145 140 6.7 TQ2S-L2-5 V 5 3.75 3.75 28.1 178 140 7.5 TQ2S-L2-6 V 6 4.5 4.5 23.3 257 140 9 TQ2S-L2-9 V 9 6.75 6.75 15.5 579 140 13.5 TQ2S-L2-12 V 12 9 9 11.7 1,028 140 18 TQ2S-L2-24 V 24 18 18 8.3 2,880 200 36 : For each surface-mounted terminal variation, input the following letter. SA type: A, SL type: L, SS type: S Notes: 1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 50 pcs. Case: 1,000 pcs. Tape and reel: 500 pcs. Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. 2 ds 61020 en tqsmd: 010611J