Mini-Com Mini-Jack TX5e UTP Jack Module SPECIFICATION SHEET specifications Category 5e/Class D, 8-position, UTP jack module shall terminate solid, 4-pair, 24 22 AWG, 100 ohm unshielded twisted pair cable and shall not require use of a punchdown tool. UTP jack modules shall use a downward forward motion termination method to optimize performance by maintaining TX5500 UTP Copper cable pair geometry while eliminating conductor untwist. The Cabling System module base sled shall be color-coded orange to designate Mini-Com TX5e Category 5e performance and shall include a universal label UTP Jack Module coded for T568A and T568B wiring schemes. Jack module: CJ588IWY* TX5500 UTP Copper Cable technical information Plenum: PUP5504*** Riser: PUR5504*** Category 5e/Class D channel Exceeds channel requirements of ANSI/TIA-568-C.2 Category 5e LSZH: PUL5504*** and component performance: and ISO 11801 Class D standards at swept frequencies CM: PUC5504*** 1 to 100 MHz TX5e UTP Patch Cords Exceeds component requirements of ANSI/TIA-568-C.2 Category CM (foot lengths): UTPCH Y 5e and ISO 11801 Class D standards at swept frequencies CM (meter lengths): UTPCH MY 1 to 100 MHz LSZH FCC and ANSI compliance: Meets all applicable ANSI/TIA-968-A requirements contacts plated (meter lengths): UTPCHL MY with 50 microinches of gold for superior performance Mini-Com Angled PoE compliance: Meets requirements of IEEE 802.3af and IEEE 802.3at for Modular Patch Panels PoE applications 24-port, 1 RU: CPPLA24WBLY IEC compliance: Meets IEC 60603-7 48-port, 2 RU: CPPLA48WBLY RoHS compliance: Compliant Mini-Com Flat Modular Patch Panels UL rated: UL 1863 approved 24-port, 1 RU: CPPL24WBLY Conductor termination range: Wire cap compatible with 24 22 AWG solid cable with conductor 48-port, 2 RU: CPPL48WBLY insulation diameters of 0.035 in. to 0.048 in. and overall cable O.D. 0200 in. to 0.250 in. For additional modular and punchdown patch panels, visit www.panduit.com. Tools and Accessories Jack module termination tool: CJT-X key features and benefits Wire snipping tool: CWST Wire snipping tool: CJAST Clear dust cap: MDC-C Clear termination cap Enables easy troubleshooting and eases conductor alignment Block out device: PSL-DCJB- during termination Phone icons: CIPIW-C+ Modular UTP jack modules snap in and out of all Mini-Com Faceplates, Data icons: CIDIW-C+ Modular Patch Panels and Surface Mount Boxes for easy moves, adds and changes *To designate color other than IW (Off White), True strain relief Controls cable bend radius for long term installed performance replace IW suffix with EI (Electric Ivory), IG (International Gray), WH (White), RJ45 interface Industry standard interface provides a quick and easy plug and AW (Arctic White), BL (Black), BU (Blue), play connection to RJ45 patch cords backwards compatible RD (Red), YL (Yellow), GR (Green), OR (Orange), or VL (Violet). Identification Can be clearly identified with optional labels and icons for **To designate color, add suffix BU (Blue) port identification or WH (White). For additional cable colors, Termination tools (optional) CJT-X termination tool ensures conductors are fully terminated contact customer service. by utilizing a smooth forward motion without impact on critical For lengths 1 to 20 feet (one foot increments) internal components for maximum reliability and 25, 30, 35, 40 feet, change the length designation in the part number to the desired Block out device (optional) Provides a simple and secure method to control access to data length. For standard cable colors other than ports while not in use Off White, add suffix BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-foot patch cord is UTPSP15BUY. For lengths 1 to 10 meters (one meter increments) and 0.5, 1.5, 2.5, 15, 20, meters, applications change the length designation in the part number to the desired length. For standard cable colors other than Off White, add suffix Mini-Com TX5e UTP Jack Modules are a Ethernet 10BASE-T, 100BASE-T (Fast BL (Black), BU (Blue), RD (Red), YL (Yellow), Ethernet), 1000BASE-T (Gigabit Ethernet) component of the TX5500 UTP Copper Cabling GR (Green), OR (Orange) or VL (Violet). For example, the part number for a blue 15-meter System. This end-to-end system provides Gigabit 155 Mb/s ATM, 622 Mb/s ATM patch cord is UTPSP15MBUY. Ethernet performance with usable bandwidth beyond To designate color other than Red, add Token ring 4/16 100 MHz. With certified performance to the suffix BL (Black), BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW (Off White) or IG ANSI/TIA-568-C.2 Category 5e and ISO 11801 Voice/data systems (International Gray) at end of the part number. Class D Edition 2.1 standards, this system will Voice over Internet Protocol (VoIP) 10/package. support the following applications: +To designate color other than IW (Off White), replace IW with EI (Electric Ivory), IG (International Gray), BL (Black), BU (Blue), RD (Red), YL (Yellow), GR (Green), OR (Orange) or VL (Violet) in the part number. 100/package. Contact customer service for bulk packaged jack modules and patch cords. wwwwww.panduit.com.panduit.com Mini-Com Mini-Jack TX5e UTP Jack Module Test Results 100 MHz Performance Test Test Method Typical Test Results (dB) NEXT > 43 Additional Transmission Performance Specifications FEXT > 35 for 4-pair 100Ohm Attenuation < .40 Category 5e Cabling, ANSI/TIA-568-C.2 Return Loss > 20 Consult factory for cable brand specific channel test results Mechanical Test Test Method Measurement Typical Test Results Normal Force Load (grams) > 100 Vibration IEC 512-6d Circuit Resistance Change (mOhms) < 40 Durability IEC 512-9a Circuit Resistance Change (mOhms < 40 Mating/Unmating IEC 512-13b Mating Force (N) < 20 Unmating Force (N) < 20 Electrical Test Test Method Measurement Typical Test Results Low Level Circuit Resistance IEC 512-2a Resistance (mOhms) < 40 Dielectric Withstand Voltage IEC 512-4a 1000VAC, 1 minute Passed Insulation Resistance IEC 512-3a Resistance (MOhms) > 1000 Environmental Test Test Method Measurement Typical Test Results Temperature Life IEC 512-9b Circuit Resistance Change (mOhms) < 40 Humidity IEC 512-11c Circuit Resistance Change (mOhms) < 40 Thermal Shock IEC 512-11d Circuit Resistance Change (mOhms) < 40 Climatic Sequence IEC 512-11a Circuit Resistance Change (mOhms) < 40 Flowing Mixed Gas Corrosion IEC 512-11g Circuit Resistance Change (mOhms) < 40 Termination Cap .72 18.3 1.37 34.8 .62 15.9 Module Housing Dimensions are in inches. Dimensions in brackets are metric . WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2010 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com WW-COSP179 or by phone: 800.777.3300 and reference COSP179 11/2010