TX5500 U/UTP Copper Cable SPECIFICATION SHEET specifications TX5500 U/UTP Copper Category 5e cable shall exceed IEC 61156-5 and Cabling System ANSI/TIA-568-C.2 Category 5e component standards. The conductors shall be 24 AWG construction with TX5500 UTP Copper Cable HDPE insulation. The copper conductors shall be CMR: PUR5504*Y twisted in pairs and all four pairs shall be covered by a flame-retardant PVC jacket. Mini-Com TX5e PLUS UTP Jack Module Jack module: CJ5E88TG** TX5e UTP Patch Cords CM technical information Meters: UTPCH1 MY Electrical Certified channel performance in a 4-connector configuration up to 100 meters Feet: UTPCH3 Y performance: and exceeds the requirements of ISO 11801 Class D and ANSI/TIA-568-C.2 DP5e Angled Punchdown Category 5e ratified standards at swept frequencies up to 100 MHz Patch Panels Certified component performance up to 100 meters and exceeds the component requirement of the IEC 61156-5 and ANSI/TIA-568-C.2 24-port, 1 RU: DPA245E88TGY Category 5e ratified standards at swept frequencies up to 100 MHz 48-port, 2 RU: DPA485E88TGY Conductors/ DP5e Flat Punchdown insulators: 24 AWG solid copper insulated with HDPE Patch Panels Certification: ANATEL 2488-09-6246 12-port, 1 RU: DP125E88TGY Flame rating: CMR UL 1666 24-port, 1 RU: DP245E88TGY PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 48-port, 2 RU: DP485E88TGY Installation Mini-Com Angled Flush Mount tension: 110 N (25 lbf) maximum Modular Patch Panels Temperature 0C to 50C (32F to 122F) during installation rating: -20C to 75C (-4F to 167F) during operation 24-port, 1 RU: CPPA24FMWBLY 48-port, 2 RU: CPPA48FMWBLY Cable jacket: Flame-retardant PVC Mini-Com Flat Flush Mount Cable diameter: 4.9mm (0.193 in.) nominal Modular Patch Panels Cable weight: 8.6 kg/305m (19 lbs./1000 ft.) 24-port, 1 RU: CPP24FMWBLY Packaging: 305m (1000 ft.) in an easy payout carton Package tested to ISTA Procedure 1A 48-port, 2 RU: CPP48FMWBLY Termination and Cable Prep Tools Termination key features and benefits tools: EGJT or TGJT Third party tested Cable has been tested as part of the TX5500 U/UTP Copper Wire Cabling System by an independent laboratory and complies snipping with the electrical channel requirements of the following tool: CWST standards: ISO 11801 Class D and ANSI/TIA-568-C.2 Wire stripping Descending length Easy identification of remaining cable reduces installation time cable markings and cable scrap tool: CJAST Tested beyond the standards Cable has been characterized to 450 MHz, 350 MHz above the standard *To designate color, add suffix BU (Blue), IG (International Gray), WH (White) or Easy payout carton Improves installation time and prevents tangling YL (Yellow) prior to the Y. **To designate color, add suffix AW (Arctic White), IW (Off White), EI (Electric Ivory), IG (International Gray), WH (White), BL (Black), OR (Orange), RD (Red), BU (Blue), GR (Green), applications YL (Yellow), or VL (Violet). For lengths 1 to 10 meters (increments of one meter) and 0.5, 1.5, 2.5, 15, 20 meters, change TX5500 U/UTP Cable is a component of the Panduit TX5500 Copper Cabling System. the length designation in the part number to The end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond desired length. For standard colors, add suffix 100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5e and ISO 11801 BU (Blue), GR (Green), RD (Red), YL (Yellow), IW (Off White) before Y at the end of the part Class D standards, this system will support the following applications: number. For example, the part number for a Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) blue, 5-meter patch cord is UTPCH5MBUY. For lengths 1 to 20 feet (increments of one 155 Mb/s ATM, 622 Mb/s ATM foot) and 25, 30, 35, 40 feet, change the length Token Ring 4/16 designation in the part number to desired length. For standard cable colors, add suffix BU (Blue), GR (Green), RD (Red), YL (Yellow), IW (Off White) before Y at the end of the part number. For example, the part number for a blue, 5-foot www.panduit.com patch cord is UTPCH5BUY. TX5500 U/UTP Copper Cable additional specifications Mechanical Test Ultimate Breaking Strength >400 N (90 lbf). Minimum Bend Radius 4 x cable diameter Electrical Test Nominal Velocity of Propagation (NVP) 67% cable construction Jacket Conductor Wire Conductor Insulator Rip Cord WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com 2016 Panduit Corp. ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com COSP393--WW-ENG or by phone: 800.777.3300 2016-06-09