CJLRCAPRD-X Panduit

45 Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack Modules SPECIFICATION SHEET 45 Angled Wire Caps for Mini-Com UTP Jack Modules specifications Up/Down 45 Angle Caps 45 angled wire caps, when mated with compatible UTP jack TX6A : CJUDCAPBU-% modules, shall provide improved cable routing to jacks in confined TX6 PLUS: CJUDCAPIW-% spaces. Angled wire caps shall terminate 4-pair, 22 - 26 AWG, 100 TX5e : CJUDCAPRD-% Left/Right 45 Angle Caps ohm unshielded twisted pair cable and shall use a forward motion TX6A : CJLRCAPBU-% termination method to optimize performance by maintaining cable pair TX6 PLUS: CJLRCAPIW-% geometry while eliminating conductor untwist. TX5e : CJLRCAPRD-% The wire caps shall be color-coded to designate performance category Compatible Mini-Com UTP Jack Modules TX6A UTP with MaTriX and shall include a universal label coded for T568B wiring schemes. Technology Mini-Com UTP Jack Modules technical information TX6A : CJ6X88TG* Channel and Exceeds channel and component requirements of ANSI/TIA-568-C.2 and ISO 11801 TX6 PLUS: CJ688TG* component standards for the respective Category or Class performance levels at the designated TX5e : CJ5E88TG* performance : swept frequencies for that Category or Class Mini-Com Spring Shuttered UTP Jack Modules IEC compliance : Meets IEC 60603-7 TX6A : CJH6X88TG* TX6 PLUS: CJH688TG* RoHS compliance: Compliant TX5e : CJH5E88TG* PoE compliance : Supports 2500 connection cycles with IEEE 802.3af / 802.3at and proposed Tools and Accessories 802.3bt type 3 and type 4 Jack module UL rated : UL 1863 and UL 2043 Termination tool: TGSJT Wire snipping tool: CWST Operating -10C to 65C (14F to 149F) Wire stripping tool: CJAST temperature: % = Package size (X = 10, C = 100) Conductor Compatible with 22 26 AWG solid or stranded cable with conductor insulation * To designate color, add suffix IW (Off White), termination range: diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in EI (Electric Ivory), IG (International Gray), AW (Arctic White), BL (Black), BU (Blue), Depth reduction Allows 55% reduction in cable routing depth compared to straight exit wire cap RD (Red), YL (Yellow), GR (Green), provided: with both allowing proper cable bend radius for 0.275 inch (6.99 mm) diameter OR (Orange,) BR (Brown), GD (Gold), LB cable (0.500 with angled caps vs. 1.100 with straight exit caps) (Light Blue), PK (Pink) or VL (Violet). When mated to compatible UTP jack modules. key features and benefits Angled cable exit: Large diameter cable can be routed to jacks in tight spaces while maintaining proper bend radius also can be used on multiple jacks positioned next to each other Reversible direction Both wire cap versions can be inserted into compatible jacks in either design: direction, bringing the convenience of needing only two parts to handle up, down, left, or right cable routing needs Wide compatibility: Immediate compatibility with Panduits most common Mini-Com UTP jacks Economical: Angled wire caps can easily be applied to new or already installed compatible jacks to gain routing advantages without needing to purchase new jacks Uses enhanced Giga-TX Optimizes performance by eliminating conductor untwist and reduces Technology: installation time and expense Consistent termination Similarity in both conductor management and termination method to design: Panduits most common straight exit Mini-Com UTP jacks ensures minimal learning curve and fast field terminations Termination tool available: TGSJT termination tool functions for both wire cap versions and ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability applications 45 Angled Wire Caps can be used with compatible deployed in office and furniture applications, since TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack their angled routing better accommodates the larger Modules where ever an angled cable exit from the bundle diameter and bigger bend radius of Category modular jack is desired and in confined jack 6A cable. mounting spaces such as in modular furniture, raceway, and wall outlets with conduit. 45 Angled Wire Caps are especially beneficial for use with Category 6A cabling which is increasingly being www.panduit.com 45 Angled Wire Caps for TX6A, TX6 PLUS and TX5e Mini-Com UTP Jack Modules Up/Down 45 TG Wire Cap Left/Right 45 TG Wire Cap CJUDCAPBU- , CJUDCAPIW- , CJUDCAPRD- CJLRCAPBU- , CJLRCAPIW- , CJLRCAPRD- (See Installation Instruction PN610) (See Installation Instruction PN609) 0.96 0.63 0.61 0.96 24.3 16.1 15.4 24.4 0.61 15.4 0.63 16.1 TGSJT Termination Tool (Required for terminating 45 Angled Wire Caps) Wall thickness >1mm 0.039 . Dimensions are in inches. Dimensions in brackets are metric.