ELECTRICAL SOLUTIONS
A.
System
Overview
Hydraulic Pump and Accessories, Electric, 10,000 PSI
B1.
Develops 10,000 psi of hydraulic pressure Convenient 120 VAC operation
Cable Ties
Easy to operate using manual switch or remote pendant supplied; Incorporates Parker type quick-connect fittings to ease installation
or optional CT-901RFS foot switch or CT-901RCH remote and save time
controlled handle
Versatile, can be used with Panduit CT-930CH, CT-940CH, or
B2.
Factory set relief valve, pump stops when crimp is complete CT-980CH crimp heads
Cable
Accessories
Std.
Pkg.
Part Number Part Description Qty.
B3.
Stainless
CT-901HP Hydraulic pump. Develops 10,000 PSI output. Pump shuts off when cycle is 1
Steel Ties
complete. Will not release until down switch is activated. Compatible with CT-900HPH
hydraulic hose, CT-930CH, CT-940CH, and CT-980CH crimp heads sold separately.*
Specifications: C1.
Pump output: 10,000 psi
Wiring
Tank capacity: 2.5L incorporates sight gauge for visual inspection of fluid level
Duct
Fluid type: Aero Shell #4 or equal
CT-901HP
Motor: 120 VAC 50/50Hz
Current: 6.5 Amps
C2.
Horsepower: 1/2 hp
Surface
Weight: 34 lbs.
Raceway
Length: 7"
Height: 14"
Width: 6"
C3.
Warranty: 5 years
Abrasion
Protection
CT-901HP pump includes:
On/off pendant switch on 10' electric cord
Three prong A/C plug on 10' electric cord
CT-900HPH
Supplied with female Parker type quick-connect fitting assembled to pump
C4.
Cable
Management
CT-900HPH Electrically non-conductive 10' hose compatible with Panduit CT-901HP hydraulic 1
pump and CT-930CH, CT-940CH, and CT-980CH crimp heads, supplied pre-filled
with hydraulic fluid for fast start up. Supplied with two male Parker type
quick-connect fittings. Warranty: 5 years.
D1.
Terminals
CT-901RCH Remote control handle provides plastic carrying handle incorporating on/off 1
activation switch that allows operator to hold crimp head and activate CT-901HP
hydraulic pump with one hand. Use with Panduit remote hydraulic crimp heads
CT-930CH, CT-940CH, and CT-980CH. Equipped with 3/8" Parker type quick-connect
D2.
coupler for attaching crimp heads to Panduit CT-900HPH hydraulic hose. Includes a
Power
CT-901RCH
10', three wire control cable that can be directly connected to the CT-901HP pump.
Connectors
Warranty: 5 years.
CT-901RFS Dual electrical foot switch that allows convenient hands free operation of the 1
D3.
Panduit CT-901HP or CT-8250HP electric hydraulic pumps used with Panduit remote
Grounding
hydraulic crimp heads. Supplied with 10' electric cord that can be directly connected
Connectors
to Panduit hydraulic pumps. Warranty: 5 years.
Contact Panduit Customer Service for use in production environments.
E1.
*For information on crimp heads, see pages D3.45, D3.46, and D3.54.
Labeling
Systems
CT-901RFS
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
E4.
Permanent
Identification
E5.
Lockout/
Tagout
& Safety
Solutions
F.
Index
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
D3.47X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Hand Tools category:
Click to view products by Panduit manufacturer:
Other Similar products are found below :
568681-1 576785-2 576786-2 58061-1 58176-1 58177-1 58177-2 58284-1 59085 0031 59737-5 015-0339-000 015-8755-001 600-146-06
M15570-25 62200-5709 6-304052-1 63443-1002 63443-3513 63443-4025 63443-7114 6-354778-5 6-354779-2 63600-2995 63810-0105
M8196914-08 M819698-07 662508-1 662908-1 679994-1 679994-2 68764-0001 69001-0105 69002-5525 690124-7 690191-1 690191-4
690518-2 690696-1 691409-4 691667-1 692006-2 692655-7 692776-1 692776-4 693077-3 693077-4 693597-1 D20418-137 D20419-189