Opti-Core Fiber Optic Patch Cords and Pigtails
Riser (OFNR) and Plenum (OFNP) Rated
SPECIFICATION SHEET
specifications
RoHS compliant fiber optic patch cords shall include simplex or
duplex LC, SC, ST or MT-RJ connectors, or FJ or keyed FJ plugs or
jacks on both ends. RoHS compliant fiber optic pigtails shall include
simplex or duplex LC, SC, ST, or MT-RJ connectors, or FJ or keyed
FJ plugs or jacks on one end and open (unterminated) on the other
Opti-Core Riser (OFNR)*
end. Patch cords and pigtails shall include laser optimized OM4, OM3
Fiber Optic Patch Cords
fiber or OM2, OM1 or OS1/OS2 fiber in 900m tight-buffered fiber,
Duplex LC to LC
1.6mm or 3.0mm simplex or duplex zipcord jacketed cable, or 1.8mm
1.6mm jacketed cable: F^E10-10M Y
duplex zipcord jacketed cable. Jacketed cable shall be compliant with
Simplex LC to LC
UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings. Patch cords 1.6mm jacketed cable: F^F10-10M Y
and pigtails shall meet or exceed requirements of TIA/EIA-568-C.3. Duplex SC to SC
3mm jacketed cable: F^D3-3M Y
The fiber connectors shall be FOCIS compliant or compatible, and
Simplex SC to SC
exceed the requirements of TIA/EIA-455-21A for 500 mating cycles.
3mm jacketed cable: F^S3-3M Y
Duplex ST to ST
technical information
3mm jacketed cable: F^D2-2M Y
Standards All connectors exceed TIA/EIA-455-21A: 500 mating cycles
Simplex ST to ST
requirements:
3mm jacketed cable: F^S2-2M Y
Compliant with: TIA/EIA-568-C.3 and ISO/IEC 11801
FJ Plug to FJ Plug
IEC-61754-7 (International)
3mm jacketed cable: F^D6P-6PM Y
TIA-604-5 (FOCIS-5)
Duplex MT-RJ to MT-RJ
UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings
1.8mm jacketed cable: F^Z12-12M
Insertion loss: Per connection: 0.10dB typical, 0.25db max (OM1, OM2 and Standard OM3, OM4)
Opti-Core Riser (OFNR)*
0.15db max (optimized OM3 and Optimized OM4) for SC and LC
Hybrid Fiber Optic Patch Cords
0.30db max for other connectivity
Duplex SC to LC
0.50dB max. (MT-RJ multimode);
1.6mm jacketed cable: F^E3-10M Y
0.25dB typical, 0.75dB max. (singlemode),
Simplex SC to LC
0.35dB max. (LC singlemode)
1.6mm jacketed cable: F^F3-10M Y
Duplex ST to LC
Return loss: 20dB min. (multimode); 26dB min. (10Gig multimode); 55dB min. (singlemode)
1.6mm jacketed cable: F^E2-10M Y
Duplex ST to SC
key features and benefits
3mm jacketed cable: F^D2-3M Y
Simplex ST to SC
Factory terminated and 100% Assures high performance for increased up-time and lower cost
3mm jacketed cable: F^S2-3M Y
tested for insertion loss (all) of ownership
FJ Plug to LC
and return loss (10Gig and SM)
1.6mm jacketed cable: F^E6P-10M Y
Riser or plenum rated jacket Meets UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings for
FJ Plug to SC
standard compliant safety 3mm jacketed cable: F^D6P-3M Y
FJ Plug to ST
Singlemode endface Every singlemode endface is inspected in compliance with Telcordia
3mm jacketed cable: F^D6P-2M Y
geometry 100% GR-326-CORE, Issue 3 requirements to assure high performance
Duplex SC to MT-RJ
factory inspected
1.8mm jacketed cable: F^Z3-12M
Singlemode endfaces Ensure a high quality endface for higher return loss to meet
Duplex ST to MT-RJ
UPC polished application requirements 1.8mm jacketed cable: F^Z2-12M
(55dB min. return loss) FJ Plug to MT-RJ
1.8mm jacketed cable: F^Z6P-12M
Singlemode patch cords Eliminates high attenuation in the E-band and allows operation over
Opti-Core Fiber Optic Pigtails**
include low water peak fiber the entire 1260nm 1625nm wavelength range; excellent for CWDM
and DWDM applications LC to pigtail
900m buffered fiber: F^B10-NM Y
Certified 10 GbE performance 10Gig Patch Cords and Pigtails are tested per IEEE 802.3ae
SC to pigtail
10 GbE to support network transmission speeds up to 10 Gb/s for
900m buffered fiber: F^B3-NM Y
link lengths up to 300m for OM3 and up to 550 meters for OM4
ST to pigtail
at 850nm to assure high performance and reliability
900m buffered fiber: F^B2-NM Y
Test data supplied with each Establishes a performance reference to streamline maintenance FJ Jack to pigtail
3mm jacketed cable: F^D6J-NM Y
patch cord and pigtail and troubleshooting
FJ Jack to pigtail
Q.C. identification label Quality control reference provides lifetime traceability of test data
900m buffered fiber: F^B6J-NM Y
applications *Part numbers listed are for riser (OFNR) rated cable; for
plenum (OFNP) rated cable, place a P after the fiber type
(^) and drop the Y.
Opti-Core Fiber Optic Patch Cords and Pigtails Opti-Core Fiber Optic Patch Cords and Pigtails
^Substitute for fiber type:
provide interconnect and cross-connect of are available in OM4, OM3 fiber or OM2, OM1 or
Z = OM4 10Gig 50/125m
applications over installations in entrance facilities, OS1/OS2. fiber types to meet the demands of ZO = Optimized OM4 10Gig 50/125m
X = OM3 10Gig 50/125m
telecommunications rooms, data centers and at Gigabit Ethernet, 10 Gigabit Ethernet and high
XO = Optimized OM3 10Gig 50/125m
the desk. They support network applications to speed Fibre Channel systems while maintaining
5 (OM2 50/125m), 6 (OM1 62.5/125m) and
9 (OS1/OS2 9/125m). MT-RJ patch cords are only
interconnect pre-terminated cassettes in main compatibility with Ethernet, Fast Ethernet, FDDI and
available in OM1 or OM2 fiber.
distribution, horizontal distribution and equipment ATM. If application requires low smoke
Substitute for length in meters: Patch cords
distribution areas. These riser (OFNR) and plenum zero halogen (LSZH) rated fiber optic patch 1m 10m, 15m, 20m, 25m or 30m; pigtails
1m, 2m, or 3m. Contact Customer Service for other
(OFNP) rated patch cords and pigtails support cords, reference Opti-Core Fibre Optic Patch
available lengths.
installations that require these flame ratings in Cords Low Smoke Zero Halogen (LSZH).
**900m buffered fiber pigtails are not flame rated;
specific environments. jacketed pigtails listed are for riser
(OFNR) rated cable.
www.panduit.com
Opti-Core Fiber Optic Patch Cords and Pigtails (OFNR and OFNP)
Fiber Optic Patch Cord Detail
4 5
2 3
7 Patch cord length in meters
Ordering Information
F XE 1010 M 5Y
Example:
12 3 4 5 6 7 8
FXE10-10M5Y = Opti-Core 10Gig LC to LC Duplex Fiber Optic Patch Cord, OM3 10 GbE 50/125m multimode riser
rated cable, LC duplex connectors on each end, and 5m in length.
2 Fiber Type and Jacket Flame Rating 4 and 5 Connector Styles
Riser (OFNR) rated cable (Y at end): Select one style for each end, listing lower number first,
Z= OM4 10Gig 50/125m number before letter, or 6J or 6P first.
ZO = Optimized OM4 10Gig 50/125m 2 = ST, 3 = SC, 6J = FJ Jack Module,
X = OM3 10Gig 50/125m 6P = FJ Plug, 10 = LC, 12 = MT-RJ and
XO = Optimized OM3 10Gig 50/125m N = Pigtail
5 = OM2 50/125m,
6 Unit of Measure (M = Meters)
6 = OM1 62.5/125m, or
7 Length
9 = OS1 9/125m
Patch cords:
Plenum (OFNP) rated cable (no Y at end):
1m 10m, 15m, 20m, 25m and 30m lengths.
ZP = OM4 10Gig 500/125m
Pigtails:
ZOP = Optimized OM4 10Gig 50/125m
1m, 2m, and 3m lengths.
XP = OM3 10Gig 50/125um
XOP = Optimized OM3 10Gig 50/125m
8 Riser RoHS Compliance
5P = OM2 50/125m,
Riser patch cords and pigtails end with a Y to identify
6P = OM1 62.5/125m, or
RoHS compliance. Plenum and MT-RJ patch cords are
9P = OS1 9/125m
RoHS compliant but do not end with a Y.
3 Cable Type
B = 900m tight-buffered fiber
D = 3mm duplex zipcord jacketed cable
S = 3mm simplex jacketed cable
E = 1.6mm duplex zipcord jacketed cable
F = 1.6mm simplex jacketed cable
Z = 1.8mm duplex zipcord jacketed cable
Note: Not all cable types and connector combinations are available. Contact customer service for availability and other lengths.
QuickNet Pre-Terminated Opticom Mini-Com
MTP* Cassettes Fiber Adapter Panels (FAPs) Fiber Optic Adapter Modules
FAP6WAQDLCZ CMDJAQLCZBL CMDEISCEI
FC^-24-10Y FC^-12-3Y
^Substitute for fiber type: Z = OM4 10Gig 50/125m, X(OM3/OM4 10Gig 50/125m), 5(OM2 50/125m), 6(OM1 62.5/125m) and 9(OS1 9/125m).
*MTP is a registered trademark of US Conec Ltd.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
cs-cdn@panduit.com cs-emea@panduit.com cs-ap@panduit.com cs-japan@panduit.com cs-la@panduit.com cs-aus@panduit.com
Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
2010 Panduit Corp.
Visit us at www.panduit.com
ALL RIGHTS RESERVED.
Contact Customer Service by email: cs@panduit.com WW-FBSP24
or by phone: 800.777.3300 and reference FBSP24 10/2010