QuickNet OM4 and OM5 Signature Core * MTP Fiber Optic Cassettes SPECIFICATION SHEET general information QuickNet OM4 and OM5 Signature Core MTP* Fiber Optic Cassettes comply with IEEE 802.3ae 10 GbE and ANSI T11.2 Fibre Channel requirements. QuickNet Signature Core MTP* Fiber Optic Cassettes employ high performance 12-fiber MTP* connectivity on the rear of the units routed to discrete SC or LC connectivity on the front. Colors for OM4 and OM5 shall follow respectively TIA/ EIA-568-C.3 and TIA 568.3 -D suggested color identification scheme. They interconnect with high-density SFF MTP* ribbon interconnect cable assemblies. High-density cassette patch panels shall hold up to 8 cassettes, allowing up to 96 fiber connections to be deployed in one rack unit (1 RU). technical information OM4 and OM5 Signature Core Fibers are modal and chromatic dispersion compensating multi-mode fibers designed for optimum performance with high-speed Vertical Cavity Surfacing Emitting Lasers (VCSEL) transceivers. The refractive index profile is engineered to correct for the interaction between modal and chromatic dispersion increasing the total channel bandwidth. Like OM3 and OM4 fiber types, the actual supported reach for Signature Core Fiber family depends on the electrical and optical characteristics of the VCSEL transceiver1. OM4 Signature Core provides you on average 20% longer reach than OM4 defined standard for all applications using Ethernet, Fibre Channel and Cisco BiDi technologies. For example, the OM4 Signature Core Fiber will support a 600m reach with 10GBASE-SR transceivers compared to a 400m maximum reach over OM4 as specified in IEEE 802.32. OM5 Signature Core provides you on average 15% longer reach than OM5 defined standard for all applications that use Short Wavelength Division Multiplexing (SWDM). SWDM is a technology that boosts transmission capacity by sending multiple signals in four wavelengths across the 850nm to 940nm on a single fiber. OM4 and OM5 Signature Core Fibers are 100% standards compliant meeting all OM3 and OM4 specifications, with an additional requirement for Differential Mode Delay (DMD) that compensates for modal and chromatic dispersion effects4. OM5 Signature Core includes additional bandwidth characterization at 953 nm to support extended distances when using SWDM. application Allows system designers to tailor configuration, reach and breakout construction to application requirements to minimize waste, optimize cable management, speed deployment, and improve flexibility and manageability for lower installation costs. construction environmental properties Fiber types: Signature Core OM4+ 50/125m Operating temperature: 0C to +70C Signature Core OM5+ 50/125m Storage and shipping temperature: -40C to +70C Fiber count: 12 or 24 Installation temperature 0C to +60C Split sleeve Zirconia ceramic: Signature Core OM4+ material: Zirconia ceramic: Signature Core OM5+ Link loss: Signature Core OM4+ Ultra Low: 0.35dB Signature Core OM5+ Ultra Low: 0.35dB standards Connectivity meets or exceeds TIA/EIA-568-C.3 and TIA 568.3-D performance requirements for respectively OM4 and OM5 defined standards ROHS 2002/95/EC: Compliant 1 The actual channel reach of a laser optimized, multimode fi ber (OM3, OM4, or Signature Core) depends on the optical and electrical parameters of the VCSEL transceiver. For worst-case optical and electrical parameters, Signature Core Fiber will provide at least 20% greater reach over standards un-compensated OM4 fi ber. 2 OM4 fi ber was ratifi ed in the IEEE802.3/D3.0 proceedings from 15-Dec-2011, Table 52-6 with an operating range of 2 to 400 meters. 3 Reach values are a minimum. 4 Differential Mode Delay (DMD) is a metric defi ned in telecommunications industry association standard EIA/TIA 455-220-A, January 2003, which describes a method for measuring the modal dispersion of laser optimized multimode mode fiber. *MTP is a registered trademark of US Conec Ltd. 5 OM5 fiber has been approved as the new wideband multimode standard on June 2016, by ANSI/TIA-492AAAE www.panduit.com * QuickNet OM4 and OM5 Signature Core MTP Fiber Optic Cassettes part number configurator Character 13 1 2 3 4 5 6 7 8 9 10 11 12 Example F C 2 S A - 1 2 - 1 0 A S 1 Fiber Product 5 Performance A = Ultra low loss F = Fiber 6 Dash 2 Product Type H = HD Flex 7 & 8 Fiber Count C = Opticom Cassette 12 = 12 fiber total 24 = 24 fiber total 3 Generation 2 = 2nd generation technology 9 Dash 4 Fiber Type 10 & 11 Connector Type 10 = Duplex LC adapter S = Signature Core OM4+ fiber available with ultra low loss only 12 & 13 Polarity W = Signature Core OM5+ fiber AS = Method A available with ultra low loss only AF = Modified Method A, pair flipped BN = Method B * QuickNet OM4 and OM5 Signature Core MTP Fiber Optic Cassettes 3.5 89 3.5 88 4.9 REF. 125 4.2 106 3.9 99 1.4 35 4.3 109 Front View shown without dustcaps Notes: 1. Reference TIA-568-C.0 for details on Method A and Method B Polarities. 2. Method B Cassettes are available upon request. Please contact Panduit for details. *MTP is a registered trademark of US Conec Ltd. Dimensions are in inches. Dimensions in brackets are metric . WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com FBSP138--WW-ENG or by phone: 800.777.3300 12/2017