Keyed LC OptiCam Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications Keyed LC small form factor (SFF) pre-polished connectors shall exceed TIA/EIA-568-B.3 performance requirements, and contain a factory-terminated fiber, eliminating field Keyed LC OptiCam Pre-Polished polishing and adhesive. Keyed LC pre-polished connectors Multimode Simplex Connectors shall be mechanically keyed with color-specific positive Keyed A (black): FLCSMC ABL and negative keying features to prevent unintentional Keyed B (red): FLCSMC BRD mating with unlike keyed or non-keyed adapters. Keyed LC Keyed C (green): FLCSMC CGR pre-polished connectors shall have an average insertion Keyed D (yellow): FLCSMC DYL loss 0.3dB per mated pair for multimode and singlemode Keyed E (orange): FLCSMC EOR fiber. Keyed LC pre-polished connectors shall captivate Keyed F (dark blue): FLCSMC FDB fiber and buffer in one action allowing for up to two Keyed LC OptiCam Pre-Polished re-terminations with no degradation in performance. Singlemode Simplex Connectors Keyed A (black): FLCSSCABL technical information Keyed B (red): FLCSSCBRD Keyed C (green): FLCSSCCGR Standards requirements: Exceed TIA/EIA-568-B.3 performance requirements Keyed D (yellow): FLCSSCDYL Keyed E (orange): FLCSSCEOR Fiber compatibility: 62.5/125m OM1, 50/125m OM2, 50/125m OM3/OM4, 9/125m OS1/OS2 Keyed F (dark blue): FLCSSCFDB Fiber size and type: 900m tight-buffered fiber OptiCam 1.6/2.0mm Boots 250m coated fiber, by using F250BT-C 250 micron fiber build-up tube Black boots: FMCBT2BL-X* kit or FO6CB or FO12CB fan-out kit OptiCam 3.0mm Boots Jacketed cable size: 1.6mm 2.0mm and 3.0mm jacketed cable with optional boots Black boots: FMCBT3BL-X* *X = Bag of 10 Boots 100 per carton. Ferrule type: Zirconia ceramic with a pre-polished fiber stub OptiCam Termination Tooling Insertion loss: 0.3dB average (multimode and singlemode) OptiCam Termination Kit: FCAMKIT Return loss: >20dB (multimode), >26dB (10Gig multimode), >50dB (singlemode) OptiCam Conversion Kit (upgrades Opti-Crimp Kit to also key features and benefits terminate OptiCam Connectors): FPPKIT-CVY Color-specific keys with Mechanically and visually distinguish connections to prevent unintentional Field polish kit positive and negative insertion into unlike keyed or non-keyed ports, allow network design upgrade (upgrades keying features flexibility and versatility, and accommodate more discrete networks field polish kit to also terminate OptiCam Factory pre-polished Eliminates inconsistent and time-consuming field polishing to deliver Connectors): FIELDKITUPG fiber stub endface required optical performance reduces termination time (less than half LC cradles (2 per pkg.): FLCC the time of field polish connectors) and the number of installation Keyed LC Mini-Com Duplex Adapter tools required Modules (Ceramic Split Sleeves) Dual cam design with fiber Secures both the fiber and the buffer during the camming step to Keyed A (black): CMDABLLCZ** and buffer clamps facilitate consistent termination results reduces the termination time Keyed B (red): CMDBRDLCZ** compared to conventional termination methods Keyed C (green): CMDCGRLCZ** Keyed D (yellow): CMDDYLLCZ** Allows up to two re-terminations to achieve optimum termination results Keyed E (orange): CMDEORLCZ** reduces the number of rejected connectors and terminations to provide Keyed F (dark blue): CMDFDBLCZ** yield rates approaching 100% for lower installed costs Keyed LC Opticom Fiber Adapter Panels Translucent housing Facilitates inspection of the fiber termination quality, resulting in rapid (Ceramic Split Sleeves) assembly (laser marked) installations, improved termination yields, and lower installed costs Keyed A (black): FAPWABLDLCZ laser marked to identify fiber stub fiber type (9m, 62.5, 50, or 50X) Keyed B (red): FAPWBRDDLCZ Keyed C (green): FAPWCGRDLCZ Non-optical disconnect design Maintains data transmission under tensile loads for jacketed cable Keyed D (yellow): FAPWDYLDLCZ Keyed E (orange): FAPWEORDLCZ Universal termination tool with Ensures fast, consistent, and optimal terminations of all OptiCam Keyed F (dark blue): FAPWFDBDLCZ integrated visual termination Connectors with connector specific cradles offers visual indication of LC Lock-in Duplex Clip indicator (VTI) proper termination after the cam step has been completed to virtually eliminate operator error to deliver a lower installed cost LC lock-in duplex clip: FLCCLIW-X applications Substitute for fiber type: 6 = 62.5/125m OM1, 5 = 50/125m OM2, X = 10Gig 50/125m Secure networks require a level of visual and and cross-connect patch fields. Keyed LC OptiCam OM3/OM4 or 9 = 9/125m OS1/OS2. mechanical differentiation, and physical layer Connectors eliminate the need for endface polishing **Substitute for module color: AW for Arctic White, BL for Black, BU for Blue, EI for Electric Ivory, or security that conventional LC connector solutions and adhesive, enabling faster deployment, especially IW for Off White. cannot provide. Typical applications for Keyed LC in remote areas and confined spaces. The hand-held Substitute for number of adapters: 6, 8, or 12. OptiCam Connectors include maintenance or OptiCam Termination Tool gives installers the emergency restoration of secure fiber networks flexibility to terminate in very close proximity to the and retrofit/initial install of behind the wall (BTW) application without having to switch tools or find connections and the permanent side of interconnect benchtop space. www.panduit.com Keyed LC OptiCam Pre-Polished Fiber Optic Connectors performance information Test Parameter Description Result Qualification test suite Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA Exceeds TIA/EIA-568-B.3 requirements FOTPs that include mechanical, environmental, and optical (TIA/EIA-568-B.3 requirements) test sequences Repeated mating 500 mate/unmate cycles Exceeds TIA-EIA-568-B.3 test requirements: Max. insertion loss: 0.75dB <0.1dB additional insertion loss Min. return loss: 20dB Cable retention (straight pull): TIA/EIA-568-B.3 requirement: Exceeds TIA/EIA-568-B.3 requirements: 900m tight-buffered fiber 0.5 lbs. load applied with <0.5dB increase in insertion loss 1.0 lbs. avg. load applied with <0.2dB increase in insertion after test loss after test 11.24 lbs. load applied with <0.5dB increase in insertion loss 11.24 lbs. load applied with <0.1dB increase in insertion loss Jacketed cable after test after test* *Jacketed cable retention tensile load may vary based on specific manufacturers jacketed cable diameter and aramid yarn count. ordering information Key Type and Average Backbone Color Connector/ Boot Ferrule Insertion Return (Adapter Key Shown) Part Number Fiber Type Cable Type Color Finish Loss** Loss A - Black FLCSMCXABL 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5ABL 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6ABL 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCABL 9/125m OS1/OS2 UPC 0.3dB >50dB B - Red FLCSMCXBRD 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5BRD 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6BRD 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCBRD 9/125m OS1/OS2 UPC 0.3dB >50dB C - Green FLCSMCXCGR 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5CGR 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6CGR 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCCGR 9/125m OS1/OS2 UPC 0.3dB >50dB D - Yellow FLCSMCXDYL 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5DYL 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6DYL 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCDYL 9/125m OS1/OS2 UPC 0.3dB >50dB E - Orange FLCSMCXEOR 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5EOR 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6EOR 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCEOR 9/125m OS1/OS2 UPC 0.3dB >50dB F - Dark Blue FLCSMCXFDB 10Gig 50/125m OM3/OM4 SPC 0.3dB >26dB Simplex*/900m FLCSMC5FDB 50/125m OM2 SPC 0.3dB >20dB tight-buffered Black FLCSMC6FDB 62.5/125m OM1 SPC 0.3dB >20dB cable FLCSSCFDB 9/125m OS1/OS2 UPC 0.3dB >50dB *For duplex connectors, replace the first S in the part number with a D. **All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. Keyed LC Mini-Com Fiber Keyed LC Opticom Fiber Keyed LC Opti-Core LC Lock-In Duplex Clip Optic Adapter Modules Adapter Panels (FAPs) Patch Cords and Pigtails CMD***LCZIW FAP6W***DLCZ F E10 -10 M FLCCLIW-X ***Substitute for key type and color: ABL for A Black, BRD for B Red, CGR for C Green, DYL for D Yellow, EOR for E Orange, or FDB for F Dark Blue. Substitute for fiber type: 6 = 62.5/125m OM1, 5 = 50/125m OM2, X = 10Gig 50/125m OM3/OM4 or 9 = 9/125m OS1/OS2. Substitute for key type and color: A for A Black, B for B Red, C for C Green, D for D Yellow, E for E Orange, or F for F Dark Blue. Substitute for length in meters: 1 10, 15, 20 or 30. Contact Customer Service for other available lengths or universal reference patch cords. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Jalisco, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2009 PANDUIT Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com WW-FBSP30 or by phone: 800-777-3300 and reference FBSP30 9/2009