LC OptiCam Pre-Polished Fiber Optic Connectors SPECIFICA TION SHEET LC OptiCam Pre-Polished Connectors with Zirconia Ceramic Ferrules specifications 10Gig 50/125m (laser optimized) simplex: FLCSMCXAQY LC small form factor (SFF) pre-polished connectors with rear pivot 10Gig 50/125m (laser optimized) latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a duplex: FLCDMCXAQY factory-terminated fiber, eliminating field polishing and adhesive. LC 50/125m simplex: FLCSMC5BLY pre-polished connectors shall have an average insertion loss of 0.3dB 50/125m duplex: FLCDMC5BLY per mated pair for multimode and singlemode fiber. LC pre-polished 62.5/125m simplex: FLCSMC6BLY connectors shall captivate fiber and buffer in one action allowing for 62.5/125m duplex: FLCDMC6BLY up to two re-terminations with no degradation in performance. 9/125m simplex: FLCSSCBUY 9/125m duplex: FLCDSCBUY OptiCam 1.6/2.0mm Boots technical information 10Gig multimode Standards requirements: TIA/EIA-604 FOCIS-10 compatible exceeds (aqua): FMCBT2AQ-X* TIA/EIA-568-B.3 requirements Multimode (black): FMCBT2BL-X Singlemode (blue): FSCBT2BU-X Fiber compatibility: 62.5/125m OM1, 50/125m OM2, 10Gig 50/125m OptiCam 3.0mm Boots laser optimized OM3/OM4 and 9/125m OS1/OS2 10Gig multimode Fiber cable type: 900m tight-buffered cable only (aqua): FMCBT3AQ-X* Multimode (black): FMCBT3BL-X Fiber cable size: 1.6mm 2.0mm and 3.0mm jacketed cable with optional boots Singlemode (blue): FSCBT3BU-X *X = Bag of 10 Boots 100 per carton. Ferrule type: Zirconia ceramic with a pre-polished fiber stub OptiCam Termination Tooling OptiCam Termination Kit: FCAMKIT Insertion loss: Ceramic: 0.3dB average (multimode and singlemode) OptiCam Conversion Kit (upgrades Opti-Crimp Return loss: Ceramic: >20dB (multimode), >26dB (10Gig multimode), Kit to also terminate >50dB (singlemode) OptiCam Connectors): FPPKIT-CVY Field Polish Kit Upgrade (upgrades Field Polish key features and benefits Kit to also terminate LC OptiCam Connectors OptiCam Connectors): FIELDKITUPG LC cradles (2 per pkg.): FLCC Factory pre-polished fiber Eliminates inconsistent and time-consuming field polishing to deliver stub endface required optical performance reduces termination time (less than LC Fiber Optic Adapters half the time of field polish connectors) and the number of 10Gig multimode: FADJLCAQ-L* installation tools required Multimode: FADJLCEI-L Dual cam design with Secures both the fiber and the buffer during the camming step to facilitate Singlemode: FADJLCZBU-L fiber and buffer clamps consistent termination results reduces the termination time compared to *L = Bag of 50 adapters 100 per carton. conventional termination methods Mini-Com LC Adapter Modules Allows up to two re-terminations to achieve optimum termination 10Gig multimode: CMDJAQLC** results reduces the number of rejected connectors and terminations Multimode: CMDJEILC** to provide yield rates approaching 100% for lower installed costs Singlemode: CMDJLCZBU Translucent Facilitates inspection of the fiber termination quality results in rapid **Substitute for module color: EI = Electric Ivory, housing assembly installations, improved termination yields, and lower installed costs BU = Blue, BL = Black, IW = Off White, AW = Arctic White Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable Optico LC Fiber Adapter Panels m Mechanical cable retention Consistently provides higher than industry standard cable retention 6 duplex MM adapters: FAP6WEIDLC requires no adhesive, speeding installation 6 duplex SM adapters: FAP6WBUDLCZ Zirconia ceramic ferrules Provide the highest durability for repeated matings 12 duplex MM adapters: FAP12WEIDLC 12 simplex SM adapters: FAP12WBULCZ OptiCam Termination Tool Opti-Core LC Patch Cords Universal termination tool Secures both fiber and buffer in one action for all OptiCam Connectors Duplex LC to LC: F E10-10MY with connector specific cradles (included) ensures fast, consistent, and Simplex LC to LC: F F10-10MY optimal terminations Duplex SC to LC: F E3-10MY Integrated visual Provide the highest durability for repeated matings Simplex SC to LC: F F3-10MY termination indicator (VTI) LC Lock-in Duplex Clip LC lock-in duplex clip: FLCCLIW-X applications Add -C to simplex connector part numbers LC fiber optic connectors are widely used in fiber Connectors eliminate the need for end face polishing for bulk packs of 100 connectors. optic backbone and horizontal applications for and adhesive providing easier, faster installation, Substitute for fiber type: 6 = 62.5/125m OM1, high-speed data transmission. Typical applications especially in remote areas and confined spaces. 5 = 50/125m OM2, X = 10Gig 50/125m for LC OptiCam Connectors include maintenance The hand-held OptiCam Termination Tool gives OM3/OM4 or 9 = 9/125m OS1/OS2. or emergency restoration of fiber networks and installers the flexibility to terminate in very close Substitute for length in meters: 1, 2, 3, 5 retrofit/initial install in both behind-the-wall proximity to the application without having to or 10.Contact Customer Service for other (BTW) and in the permanent side of panelized switch tools or find benchtop space. available lengths. interconnect and cross-connect. LC OptiCam www.panduit.com LC OptiCam Pre-Polished Fiber Optic Connectors performance information Test Parameter Description Result Qualification test suite Complete testing protocol per TIA/EIA-568-B.3 using Exceeds TIA/EIA-568-B.3 requirements (TIA/EIA-568-B.3 requirements) TIA/EIA FOTPs that include mechanical, environ- mental and optical test sequences Connector intermatability Dimensional and material compliance to All connectors are FOCIS compatible with TIA/EIA standards TIA/EIA-604-10 Repeated mating 500 mate/unmate cycles Exceeds TIA/EIA-568-B.3 test requirements: Max. insertion loss: 0.75dB <0.1dB additional insertion loss Min. return loss: 20dB Cable retention (straight pull): TIA/EIA-568-B.3 requirement: Exceeds TIA/EIA-568-B.3 requirements: 900m tight-buffered fiber 0.5 lbs. load applied with <0.5dB increase in 1.0 lbs. avg. load applied with <0.2dB insertion loss after test increase in insertion loss after test Jacketed cable 11.24 lbs. load applied with <0.5dB increase in 11.24 lbs. load applied with <0.1dB increase insertion loss after test in insertion loss after test* selection information Part Number Connector Ferrule Fiber Ferrule Backbone Boot Average Return Type Material Finish Color Color Insertion Loss** Loss FLCSMCXAQY Simplex Zirconia 10 GbE 50/125m SPC (laser optimized) Aqua Aqua 0.3dB >26dB Ceramic OM3/OM4 FLCDMCXAQY Duplex FLCSMC5BLY Simplex Zirconia 50/125m OM2 SPC Black Black 0.3dB >20dB Ceramic FLCDMC5BLY Duplex FLCSMC6BLY Simplex Zirconia 62.5/125m OM1 SPC Electric Black 0.3dB >20dB Ceramic FLCDMC6BLY Duplex Ivory FLCSSCBUY Simplex Zirconia 9/125m OS1/OS2 UPC Blue Blue 0.3dB >50dB Ceramic FLCDSCBUY Duplex *All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. LC OptiCam Pre-Polished LC OptiCam Pre-Polished OptiCam Termination Tool LC Lock-In Duplex Clip Simplex Connector Duplex Connector .25 6.35 .25 2.23 2.23 (6.35) (56.6) 56.6 2.23 2.23 (56.6) 56.6 FLCSMC***Y FLCDMC***Y OCTT FLCCLIW-X (Patch cords available separately or in termination kits) Dimensions are in inches Dimensions in brackets are in millimeters . WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2015 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. FBSP19--WW-ENG Contact Customer Service by email: cs panduit.com 3/2015 or by phone: 800.777.3300