FR6ALB Panduit

A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 4x4 and 6x4 FiberRunner Mounting Brackets C. Fiber Optic For Std. Std. Systems Threaded Pkg. Ctn. Part Number Part Description Rod Size Qty. Qty. D. Power Existing Threaded Rod QuikLock Bracket for 6x4 and 4x4 Systems over FR6TRBE12 Used to support the 6x4 and 4x4 systems from existing 1/2 1 10 Ethernet threaded rod installations. Bracket is secured to FR6TRBE12 FR6TRBE58 5/8 1 10 threaded rod with two split nuts. The pre-assembled E. FR6TRBE58 slide clamps enable fast assembly to channel. FR6TRBE12M 12mm 1 10 Zone Use 7/16 nut driver on slide clamps. FR6TRBE12M Cabling FR6TRBE58M FR6TRBE58M 16mm 1 10 New Threaded Rod QuikLock Bracket for 6x4 and 4x4 Systems F. FR6TRBN12 Used to support the 6x4 and 4x4 systems from any 1/2 1 10 Wireless new threaded rod installations. Bracket is secured to FR6TRBN58 5/8 1 10 threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16 FR6TRBN12M 12mm 1 10 FR6TRBN12 nut driver on slide clamps. G. FR6TRBN58 Outlets FR6TRBN58M 16mm 1 10 FR6TRBN12M FR6TRBN58M Underfloor Pedestal QuikLock Bracket for 6x4 and 4x4 Systems H. FR6USB Used to support the 6x4 and 4x4 systems by attaching 1 10 Media to underfloor pedestals. (Contains all necessary Distribution hardware.) Use on pedestals up to 1 in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16 nut driver on slide clamps. I. Physical Infrastructure FR6USB Adjustable Ladder QuikLock Bracket for 6x4 and 4x4 Systems Management FR6ALB Used to support the 6x4 and 4x4 systems attaching to 1 10 any 3/8 (9.5mm) x 1 1/2 (38.1mm) or 3/8 (9.5mm) J. x 2 (50.8mm) ladder rack rail. Adjustable to nine Overhead & incremental positions from 4 (101mm) to 12 (305mm) Underfloor above or below the ladder rack. No threaded rod Routing required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16 nut driver on slide clamps. K. FR6ALB Surface Raceway Center Support QuikLock Bracket for 6x4 and 4x4 Systems FR6CS12 Used to support the 6x4 and 4x4 systems from below 1/2 1 10 L. with new threaded rod. Bracket is secured to threaded Cabinets, FR6CS58 5/8 1 10 rod with two nuts. The pre-assembled slide clamps Racks & enable fast assembly to channel. Use 7/16 nut driver Cable FR6CS12M 12mm 1 10 Management on slide clamps. Also can be secured directly to the top of cabinets. FR6CS58M 16mm 1 10 FR6CS12 M. FR6CS58 Grounding & FR6CS12M Bonding FR6CS58M N. Industrial O. Labeling & Identification P. Cable Management Accessories Q. Index Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems 4x4 and 6x4 FiberRunner Mounting Brackets (continued) C. Fiber Optic For Std. Std. Systems Threaded Pkg. Ctn. Part Number Part Description Rod Size Qty. Qty. D. Power Top Support Adjustable C QuikLock Bracket for 6x4 and 4x4 Systems over FR6ACB12 Used to support the 6x4 and 4x4 systems from any 1/2 1 Ethernet new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height FR6ACB58 5/8 1 E. adjustments to accommodate system with or without Zone hinged cover. Bracket is secured to threaded rod with FR6ACB12 FR6ACB12M 12mm 1 Cabling two nuts. The pre-assembled slide clamps enable fast FR6ACB58 assembly to channel. Use 7/16 nut driver on FR6ACB12M FR6ACB58M 16mm 1 slide clamps. FR6ACB58M F. Wireless Trapeze QuikLock Bracket for 6x4 and 4x4 Systems FR6TB38 Used to support the 6x4 and 4x4 systems by spanning 3/8 1 10 two threaded rod drops. Can be installed from above FR6TB12 1/2 1 10 or below. Bracket is secured to each threaded rod G. with two nuts. The pre-assembled slide clamps enable Outlets FR6TB38M 10mm 1 10 FR6TB38 fast assembly to channel. Use 7/16 nut driver on FR6TB12 slide clamps. FR6TB12M 12mm 1 10 FR6TB38M FR6TB12M H. Adjustable Cabinet QuikLock Bracket for 6x4 and 4x4 Systems Media Distribution FR6ACAB Used to support the 6x4 and 4x4 systems attaching 1 to the top of cabinets. Adjustable from 4 1/4 (108mm) to 9 (229mm) allowing runs to be leveled over uneven I. cabinet heights. Also allows spillouts such as the Physical vertical tee to be positioned directly over cable inlets Infrastructure on cabinet tops. Bracket is secured to the cabinet Management frame with through bolts (not included). The pre-assembled slide clamps enable fast assembly J. to channel. Use 7/16 nut driver on slide clamps. Overhead & FR6ACAB Underfloor Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2 2 Routing Ladder Rack F2PCLB12 Two-piece bracket attaches to 3/8 (9.5mm) wide x 1/2 1 10 K. 1 1/2 (38.1mm) or 3/8 (9.5mm) wide x 2 (50.8mm) Surface ladder rack rail. Bracket halves slide into position and Raceway clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded rod (not F2PCLB58 5/8 1 10 L. included). Contains bracket and hardware for attaching F2PCLB12 Cabinets, bracket to ladder rack. F2PCLB58 Racks & Cable Management Two-Piece Framing Clip for Attaching 5/8 Threaded Rod to 2 x 9/16 C-Channel Auxiliary Framing Bars M. Grounding & FRAFC58 Two-piece framing clip attaches to auxiliary framing 5/8 1 10 Bonding bars. Framing clip halves slide into position and interlock on the auxiliary framing bars, allowing easier assembly of the threaded rod to bars. Contains two-piece framing clip and hardware N. for attaching framing clip to auxiliary framing bars. Industrial FRAFC58 (5/8 threaded rod not included.) O. Labeling & Identification P. Cable Management Accessories Q. Index Table continues on next page For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). www.panduit.com J.33