ST2 OptiCam Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications ST2 OptiCam Pre-Polished Connectors ST2 pre-polished fiber optic connectors shall be TIA/EIA-604 with Zirconia Ceramic Ferrules FOCIS-2 compliant and contain a factory-terminated fiber, s eliminating field polishing and adhesive. ST2 pre-polished 50/125m simplex: FST2MCXAQ connectors shall have an average insertion loss of 0.3dB per s 50/125m simplex: FST2MC5BL mated pair for multimode and singlemode fiber. ST2 pre-polished s 62.5/125m simplex: FST2MC6EI connectors shall capture fiber and buffer in one action allowing s 9/125m simplex: FST2SCBU for up to two re-terminations with no degradation in performance. OptiCam 1.6/2.0mm Boot Assemblies Multimode (aqua): FMCBT2AQ-X* technical information Multimode (black): FMCBT2BL-X Standards requirements: TIA/EIA-604 FOCIS-2 compliant exceeds Singlemode (blue): FSCBT2BU-X TIA/EIA-568-D.3 requirements OptiCam 3.0mm Boot Assemblies Fiber compatibility: 62.5/125m OM1, 50/125m OM2, 50/125m OM3/OM4 Multimode (aqua): FMCBT3AQ-X* and 9/125m OS2 Multimode (black): FMCBT3BL-X Fiber size and type: 900m tight-buffered fiber Singlemode (blue): FSCBT3BU-X 250m coated fiber, by using F250BT-C 250 micron fiber build-up *X = bag of 10 boots 100 per carton. tube kit or FO6CB or FO12CB fan-out kit OptiCam 2 Termination Tooling Jacketed cable size: 1.6mm 2.0mm and 3.0mm jacketed cable with optional boots Ferrule type: Zirconia ceramic OptiCam 2 Termination Kits: FOCTT2-KIT Insertion loss: 0.3dB average (multimode and singlemode) FOCTT2-BKIT Return loss: >20dB (multimode), >26dB (10Gig multimode), ST cradles: FSTC2 >50dB (singlemode) Mini-Com ST Adapter Modules Multimode: CMST** key features and benefits Singlemode: CMSTZ** **Substitute for module color: EI = Electric Ivory, ST2 OptiCam Connectors BU = Blue, BL = Black, IW = Off White, Factory pre-polished fiber Eliminates inconsistent and time-consuming field polishing to deliver AW = Arctic White. stub endface required optical performance reduces termination time (less than Opticom ST Fiber Adapter Panels half the time of field polish connectors) and the number of installation tools required 6 simplex MM adapters: FAP6WST Dual cam design with Secures both the fiber and the buffer during the camming step to 6 simplex SM adapters: FAP6WSTZ fiber and buffer clamps facilitate consistent termination results reduces the termination time 8 simplex MM adapters: FAP8WST compared to conventional termination methods 8 simplex SM adapters: FAP8WSTZ Allows up to two re-terminations to achieve optimum termination results reduces the number of rejected connectors and terminations s to provide yield rates approaching 100% for lower installed costs Add -C to simplex connector part numbers for bulk packs of 100 connectors. Translucent Facilitates inspection of the fiber termination quality results in rapid Substitute for fiber type: 6 = 62.5/125m housing assembly installations, improved termination yields, and lower installed costs OM1, 5 = 50/125m OM2, X = 50/125m OM3/OM4 or 9 = 9/125m OS2. Mechanical cable retention Consistently provides higher than industry standard cable retention requires no adhesive, speeding installation OptiCam 2 Termination Tool Universal termination tool The OptiCam 2 Termination Tool is designed to offer certainty of termination of Opti-Cam connectors LCD Display Guides the user through the termination process with simple step-by- step prompts and on-screen visuals. Indicates the field fiber and fiber stub are in proper alignment before camming Calculated Insertion Loss Provides calculated insertion loss value on completion of the camming process applications ST2 fiber optic connectors are widely used in fiber ST2 OptiCam Connectors eliminate the need for optic backbone and horizontal applications for end face polishing and adhesive providing easier, high-speed data transmission. Typical applications faster installation, especially in remote areas and for ST2 OptiCam Connectors include maintenance confined spaces. The hand-held OptiCam 2 or emergency restoration of fiber networks and Termination Tool gives installers the flexibility to retrofit/initial install in both behind-the-wall (BTW) terminate in very close proximity to the application and in the permanent side of panelized interconnect without having to switch tools or find benchtop and cross-connect. space. www.panduit.com ST2 OptiCam Pre-Polished Fiber Optic Connectors performance information Test Parameter Description Result Exceeds TIA/EIA-568-D.3 requirements Qualification test suite Complete testing protocol per TIA/EIA-568-D.3 (TIA/EIA-568-D.3 requirements) using TIA/EIA FOTPs that include mechanical, environmental, and optical test sequences Connector intermatability Dimensional and material compliance to All connectors are FOCIS compliant TIA/EIA standards with TIA/EIA-604-2-A Exceeds TIA/EIA-568-D.3 test requirements: Repeated mating 500 mate/unmate cycles <0.1dB additional insertion loss Max. insertion loss: 0.75dB Min. return loss: 20dB Cable retention (straight pull): TIA/EIA-568-D.3 requirement: Exceeds TIA/EIA-568-D.3 requirements: 0.5 lbs. load applied with <0.5dB increase in 1.0 lbs. avg. load applied with <0.2dB 900m tight-buffered fiber insertion loss after test increase in insertion loss after test Jacketed cable 11.24 lbs. load applied with <0.5dB increase in 11.24 lbs. load applied with <0.1dB increase insertion loss after test in insertion loss after test* *Jacketed cable retention tensile load may vary based on specific manufacturers jacketed cable diameter and aramid yarn count. selection information Boot Average Connector Ferrule Ferrule Backbone Return Part Number Fiber Type Material Finish Color Color Insertion Loss** Loss Zirconia FST2MCXAQ Simplex 50/125m SPC Natural Aqua 0.3dB >26dB Ceramic OM3/OM4 Zirconia FST2MC5BL Simplex 50/125m OM2 SPC Natural Black 0.3dB >20dB Ceramic Electric Zirconia FST2MC6EI Simplex SPC Natural 0.3dB 62.5/125m OM1 >20dB Ceramic Ivory FST2SCBU Zirconia Simplex UPC 9/125m OS2 Natural Blue 0.3dB >50dB Ceramic **All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. OptiCam Boot Assemblies For 1.6/2.0mm Jacketed Cable ST2 OptiCam Pre-Polished OptiCam 2 Termination Kit Simplex Connector 0.95 24.1 FSCBT2BU-X For 3.0mm Jacketed Cable 2.23 56.6 0.95 FST2MC** FOCTT2-BKIT 24.1 (Patch cords available separately or in termination kits) FSCBT3BU-X ***Substitute for fiber type: For multimode, insert XAQ for 10Gig 50/125m, 5BL for 50/125m, or 6BL for 62.5/125m. Singlemode boot assembly part numbers (blue) are shown. For multimode boot assemblies, replace S (Singlemode) in part number with M (Multimode) and replace BU (Blue) with AQ (Aqua) or BL (Black). Dimensions are in inches. Dimensions in brackets are in millimeters. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2018 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com FBSP22--WW-ENG 1/2018 or by phone: 800.777.3300