specifications
ST Fiber Optic Connectors shall be compliant
NETWORK CONNECTIVITY GROUP
with TIA FOCIS-2. ST connectors shall be
field installable in one module space. The
SPEC SHEET
fibers shall terminate in 2.5mm ferrules and
have typical insertion loss of less than 0.3dB
per connector.
ST Fiber Optic Connector
Multimode 900m Tight-Buffered or
technical information
3mm Jacketed Fiber
Fiber compatibility: 62.5/125m and 50/125m multimode, 9/125m singlemode
Black boot: FSTMBL
Red boot: FSTMRD
Fiber cable types: 3.0mm jacketed or 900m buffered
Singlemode 900m Tight-Buffered
Ferrule type: Zirconia ceramic, pre-radiused
or 3mm Jacketed Fiber
Insertion loss: Less than 0.3dB typical
Blue boot: FSTSBU
Return loss: Greater than 20dB multimode, 40dB singlemode
Adapter Modules
ST adapter CMST**
module:
Multimode Patch Cords OPTI-JACK
key features and ...benefits
OPTI-JACK duplex F6D6P-2M
plug to ST:
Proven 2.5mm ceramic Uses standard termination procedures and provides strength
ferrules and reliability Simplex ST to ST: F6S2-2M
Duplex ST to ST: F6D2-2M
Robust design Protects fibers from mechanical and environmental stress
Duplex ST to SC: F6D2-3M
TIA standardization FOCIS-2 (ST) interface approved at the TIA, required by
OPTI-JACK duplex F6D6J-2M2
EIA/TIA-568-B.3
jack to ST: (Only available in
2m)
Anaerobic adhesive Decreases termination time and reduces installed cost
Duplex ST to FC: F6D2-4M
Singlemode Patch Cords OPTI-JACK
OPTI-JACK duplex F9D6P-2M
plug to ST:
applications
Simplex 900m F9B2-NM
buffered ST pigtails:
PANDUIT ST Fiber Optic Connectors utilize a low cost, easy to terminate solution for
Simplex ST to ST: F9S2-2M
an industry standard design for equipment fiber-to-the-desk and horizontal applications.
OPTI-JACK duplex F9D6J-2M2
cross-connects or interconnects. These Singlemode connectors offer ultimate data
jack to ST: (Only available in
connectors are field installable with the same transmission capabilities for high speed
2m)
easy to use anaerobic adhesive and polishing backbone applications. PANDUIT ST adapter
Duplex ST to ST: F9D2-2M
procedures as the OPTI-JACK Fiber Optic modules are completely modular to allow use
Duplex ST to SC: F9D2-3M
Connector. ST Fiber Optic Connectors are with other connectors for multimedia
Duplex ST to FC: F9D2-4M
widely used in fiber optic backbone and solutions. Modules are MINI-COM compatible
horizontal applications for high speed data for use in all patch panels, faceplates and
Termination Tooling
transmissions. Multimode connectors provide surface mount boxes.
Termination kit: FJKITG
Singlemode connectors also S is a trademark of Lucent Technologies
require:
Polishing film: FPF1-V
(5-sheet pack)
installer tip
Polishing cloth: FPCL-Q
(25-sheet pack)
Polishing slurry: FPSL
Anaerobic adhesive speeds termination
**Substitute: EI=Electric Ivory
time resulting in reduced installed cost.
WH=White
BL=Black
IW=Off White
IG=International Gray
Please contact factory for additional
Visit our website at: www.panduit.com/ncg
patch cord configurations
Available in 1,2,3 and 10 metersST Fiber Optic Connector
ST Fiber Optic Connector Performance
TIA 455 ISO/IEC 874-1 Description Test Procedure and Required Performance
3 4.5.22 Thermal Cycling -40C to 75C for 5 cycles; <0.3dB additional loss
6 4.5.4 Cable Retention Apply 7.5lb. Load (0.5lb for buffered fiber) for 5 seconds
0 angle; <0.3dB additional loss
13 4.4.1,2 Visual, Mechanical Inspection and mechanical dimensions according to
FOCIS-2 (ST)
21 4.5.32 Durability Mate/unmate connectors for 500 cycles, <0.3dB additional loss
34 4.4.7 Insertion Loss <0.3dB typical
107 Return Loss 20dB minimum return loss (multimode) and 40dB minimum
return loss (singlemode)
CMST**
1.56 REF (3.9)
.71
900m BOOT
(18.1)
3mm BOOT
2.05 REF
1.37
(5.2)
(34.8)
.61
(15.4)
Dimensions are in inches (Dimensions in parentheses are metric)
Our products are warranted to be free from defects in material and workmanship at the time of sale but our This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED
obligation under this warranty is limited to the replacement of any product proved to be defective within 6 WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY
months (for product) or 90 days (for tools) from the date of delivery. Tool warranty is void if Panduit tools EXCLUDED. Neither seller nor manufacturer shall be liable for any other injury, loss or damage whether direct
are modified, altered or misused in any way. Use of Panduit tooling with any product other than the specified or consequential, arising out of the use of, or the inability to use, the product.
Panduit products for which the tool was designed, constitutes misuse. Before using, user shall determine The information contained in this literature is based on our experience to date and is believed to be reliable.
the suitability of the product for his intended use and user assumes all risk and liability whatsoever in It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not
connection therewith. guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein
are for reference purposes only. For specific dimensional requirements consult the factory. This publication is
WORLD HEADQUARTERS
not be taken as a license to operate under, or a recommendation to infringe any existing patents. This
PANDUIT CORP.
supersedes and voids all previous literature, etc.
Tinley Park, Illinois, USA
Phone: 888-506-5400, ext. 6914
For Pricing and Further Information
708-532-1800, ext. 6914
Contact your local authorized
Fax: 708-460-2897
NETWORK CONNECTIVITY GROUP
Email: info@panduit.com
PANDUIT PAN-NET Distributor or Sales Office
Internet: www.panduit.com/ncg
PANDUIT CANADA EUROPEAN HEADQUARTERS ASIAN HEADQUARTERS PANDUIT CORP. PANDUIT MEXICO/LATIN AMERICA PANDUIT (AUST.) PTY. LTD.
Div. of PANDUIT CORP. PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. Japan Branch & CARIBBEAN Phone: (61) 3-9794 9020
Markham, Ontario London, UK Republic of Singapore Phone (81) (3) 3767-7011 Phone: (52) 3 666-2501
Phone: 905-475-6922 Phone: 44(0) 208-601-7200 Phone: (65) 379 6700
Panduit Corp. 2000 SA117N245A-OP
ALL RIGHTS RESERVED Printed in U.S.A.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES