OM4 and OM5 Signature Core Push-Pull LC Duplex Fiber Optic Patch Cords SPECIFICATION SHEET general information OM4 and OM5 Signature Core Push-Pull LC Duplex Fiber Optic Patch Cords allow for rapid deployment of high-density permanent links in a single assembly for data center applications requiring high bandwidth, extended reach, and extremely low insertion loss. Push-Pull LC Duplex Fiber Optic Patch Cords containing the custom push-pull strain relief boot and duplex clip, allow users easy accessibility in tight areas when deploying very high density LC patch fields in data center applications. They are available in riser (OFNR) for OM4 Signature Core and for plenum (OFNP), and low smoke zero halogen (LSZH) rated jacket materials for both OM4 and OM5 Signature Core to comply with local cabling ordinances. technical information OM4 and OM5 Signature Core Fibers are modal and chromatic dispersion compensating multi-mode fibers designed for optimum performance with high-speed Vertical Cavity Surfacing Emitting Lasers (VCSEL) transceivers. The refractive index profile is engineered to correct for the interaction between modal and chromatic dispersion increasing the total channel bandwidth. Like OM3 and OM4 fiber types, the actual supported reach for Signature Core Fiber family depends on the electrical and optical characteristics of the VCSEL transceiver1. OM4 Signature Core provides you on average 20% longer reach than OM4 defined standard for all applications using Ethernet, Fibre Channel and Cisco BiDi technologies. For example, the OM4 Signature Core Fiber will support a 600m reach with 10GBASE-SR transceivers compared to a 400m maximum reach over OM4 as specified in IEEE 802.32. OM5 Signature Core provides you on average 15% longer reach than OM5 defined standard for all applications that use Short Wavelength Division Multiplexing (SWDM). SWDM is a technology that boosts transmission capacity by sending multiple signals in four wavelengths across the 850nm to 940nm on a single fiber. OM4 and OM5 Signature Core Fibers are 100% standards compliant meeting all OM3 and OM4 specifications, with an additional requirement for Differential Mode Delay (DMD) that compensates for modal and chromatic dispersion effects4. OM5 Signature Core includes additional bandwidth characterization at 953 nm to support extended distances when using SWDM. application: Provide interconnect and cross-connect of applications in entrance facilities, telecommunication rooms, data centers, and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas. construction physical properties Fiber count: Duplex (2-fiber) jacketed zipcord Cable outside diameter (OD): 1.6mm duplex Cable jacket ratings: Plenum (OFNP) Bend radius, minimum: 32mm Riser (OFNR) Bend radius, minimum (long term): 16mm Low Smoke Zero Halogen (LSZH) Connector cable retention: 50N (4.24 lb) Fiber types: OM4 Signature Core 0C (32F) OM5 Signature Core 19.4N (4.4 lb) Connector types, End A: 90C (194F) Duplex LC Connector durability: Connector types, End B: 500 cycles Duplex LC Jacket color: Aqua: OM4 Signature Core environmental properties Lime green: OM5 Signature Core Storage and -40C to 70C shipping temperature: (-40F to 158F) optical properties Operating and -10C to 60C Connector insertion 0.10dB max installation temperature: (14F to 140F) loss: standards Connector return loss: 26dB min Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 1 The actual channel reach of a laser optimized, multimode fiber (OM3, OM4, or Signature Core ) depends (FOCIS-10), TIA/EIA-568-C.1, RoHS compliant for OM4 on the optical and electrical parameters of the VCSEL ANSI/TIA-492AAAE, IEC 60793-2-10 Ed 6, TIA 568.3-D, ISO transceiver. For worst-case optical and electrical parameters, Signature Core Fiber will provide at least 11801 Ed 3, RoHS compliant for OM5 20% greater reach over standard un-compensated OM4 fiber. 2 OM4 fiber was ratified in the IEEE802.3/D3.0 proceedings from Dec.15, 2011, Table 52-6 with an Restriction of Hazardous All patch cord Operating Range of 2m to 400m. 3 Substances (RoHS) Compliance: components meet Reach values are a minimum. 4 Differential Mode Delay (DMD) is a metric defined in telecommunications industry association standard the requirement EIA/TIA 455-220-A, January 2003, which describes a method of Directive for measuring the modal dispersion of laser optimized multimode fiber. 5 2002/95/EC OM5 fiber has been approved as the new wideband multimode standard on June 2016, by ANSI/TIA-492AAAE www.panduit.com OM4 and OM5 Signature Core Push-Pull LC Duplex Fiber Optic Patch Cords part number configurator Example: FS2ERQ1Q1NNM005 = Fiber, OM4+, 2-fiber, 1.6mm cable, riser rated, LC push-pull connector to LC push-pull connector, ultra IL, 5 meters Character 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Example F S 2 E R Q 1 Q 1 N N M 0 0 5 1 Fiber Product 6 Connector Type 12 Unit of Length F = Fiber Q = LC push-pull connector M = Meters F = Feet 2 Fiber Type 7 Connector Variant 13, 14, 15 Length S = OM4+ Signature Core Fiber 1 = Push-Pull Patch Cord 001 020m, 025m, 030m W = OM5+ Signature Core Fiber 8 Connector Type and 035m 3 Fiber Count Q = LC push-pull connector 001 = 050 Feet for OM5+ 2 = 2-fiber 9 Connector Variant Signature Core 4 Cable Type 1 = Push-Pull Patch Cord 001 = 050 Meters for OM5+ E = 1.6mm 10 Performance/Construction Signature Core 5 Jacket Type N = 0.10dB -IL / A-B (Straight Through) L = Low Smoke Zero Halogen (LSZH) 11 Connector Variant R = Optical Fiber Non-Conductive N = No variant Riser (OFNR) polarity changeover Duplex clip 1 Retaining 2 3 feature A B Squeeze both sides of the Carefully slide boot Remove both connectors from duplex clip boot. Squeezing sides lifts backward while still and switch positions of A/B. Only perform boot over retaining feature. squeezing sides. this change on one end of the patch cord. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2017 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com FBSP136--SA-ENG or by phone: 800.777.3300 11/2017