Opti-Core Fibre Optic Patch Cords Low Smoke Zero Halogen (LSZH) Rated SPECIFICATION SHEET specifications RoHS compliant fibre optic patch cords shall include simplex or duplex LC, SC, ST or MT-RJ connectors, or FJ or keyed FJ plugs or jacks on both ends. RoHS compliant fibre optic pigtails shall include Opti-Core Low Smoke Zero simplex or duplex LC, SC, ST, or MT-RJ connectors, or FJ or keyed Halogen (LSZH) Fibre Optic FJ plugs or jacks on one end and open (unterminated) on the other Patch Cords end. Patch cords and pigtails shall include laser optimised OM4, OM3 Duplex LC to LC fibre or OM2, OM1 or OS1/OS2 fiber in 900m tight-buffered fibre, 1.6mm 1.6mm or 3.0mm simplex or duplex zipcord jacketed cable, or 1.8mm jacketed cable: F LE10-10M duplex zipcord jacketed cable. Jacketed cable shall be compliant with IEC-60332-3 (LSZH) flame ratings. Patch cords and pigtails shall meet Duplex SC to SC or exceed requirements of TIA/EIA-568-C.3. The fibre connectors shall 3mm be FOCIS compliant or compatible, and exceed the requirements of jacketed cable: F LD3-3M TIA/EIA-455-21A for 500 mating cycles. Duplex ST to ST 3mm technical information jacketed cable: F LD2-2M Standards All connectors exceed TIA/EIA-455-21A: 500 mating cycles Duplex MT-RJ to requirements: Compliant with: TIA/EIA-568-C.3 and ISO/IEC 11801 MT-RJ 1.8mm IEC-61754-7 (International) jacketed cable: F LZ12-12M TIA-604-5 (FOCIS-5) Opti-Core Low Smoke Zero IEC-60332-3 (LSZH) flame rating Halogen (LSZH) Hybrid Insertion Per connection: 0.10dB typical (multimode), 0.25db max. (OM1, OM2 Fibre Optic Patch Cords loss: and Standard OM3, OM4) Duplex SC to LC 0.15db max. (optimized OM3 and Optimized OM4) for SC and LC 0.30db max. for other connectivity 1.6mm 0.50dB max. (MT-RJ multimode) jacketed cable: F LE3-10M 0.25dB typical singlemode, 0.35dB max., (SM-UPC) for LC, Duplex ST to LC 0.50dB max. (SM-UPC) for other connectivity 1.6mm Return loss: 20dB min. (multimode) 26dB min. (10Gig multimode) jacketed cable: F LE2-10M 55dB min. (singlemode) Duplex ST to SC 3mm jacketed cable: F LD2-3M key features and benefits Duplex SC to Factory terminated and 100% Assures high performance for increased up-time and lower MT-RJ 1.8mm tested for insertion loss (all) cost of ownership jacketed cable: F LZ3-12M and return loss (10Gig and SM) Duplex ST to Low smoke zero halogen Meets IEC-60332-3 (LSZH) flame rating for standard MT-RJ 1.8mm rated jacket compliant safety jacketed cable: F LZ2-12M Singlemode endface Every singlemode endface is inspected in compliance with Duplex FJ Plug geometry 100% Telcordia GR-326-CORE, Issue 3 requirements to assure to MT-RJ 1.8mm factory inspected high performance jacketed cable: F LZ6P-12M Singlemode endface Ensure a high quality endface for higher return loss to meet UPC polished application requirements Substitute for fibre type: (55dB min. return loss) Z = OM4 10Gig 50/125m ZO = Optimized OM4 10Gig 50/125m Singlemode patch cords Eliminates high attenuation in the E-band and allows X = OM3 10Gig 50/125m include low water peak fibre operation over the entire 1260nm 1625nm wavelength XO = Optimized OM3 10Gig 50/125m range excellent for CWDM and DWDM applications 5 = OM2 50/125m, 6 = OM1 62.5/125m, or Certified 10 GbE performance 10Gig Patch Cords and Pigtails are tested per IEEE 802.3ae 10 9 = OS1 9/125m GbE to support network transmission speeds up to 10 Gb/s for link Substitute for length in metres: lengths up to 300m for OM3 and up to 550 meters for OM4 at Patch cords 1m 10m, 15m, 20m, 25m 850nm to assure high performance and reliability or 30m pigtails 1, 2, or 3. Test data supplied with each Establishes a performance reference to streamline Contact Customer Service for other available lengths. patch cord maintenance and troubleshooting Q.C. identification label Quality control reference provides lifetime traceability of test data applications Opti-Core Fibre Optic Patch Cords provide and Pigtails are available in OM4, OM3 fibre or interconnect and cross-connect of applications OM2, OM1 or OS1/OS2 fibre types to meet the over installations in entrance facilities, demands of Gigabit Ethernet, 10 Gigabit Ethernet telecommunications rooms, data centres and at and high speed Fibre Channel systems while the desk. They support network applications to maintaining compatibility with Ethernet, Fast interconnect pre-terminated cassettes in main Ethernet, FDDI and ATM. If application requires distribution, horizontal distribution, and equipment riser (OFNR) or Plenum (OFNP) rated fibre optic distribution areas. These low smoke zero halogen patch cords or pigtails, refer to Opti-Core Fibre (LSZH) rated patch cords support installations Optic Patch Cords or Pigtails Riser (OFNR) and that require these flame ratings in specific Plenum (OFNP) Rated specification sheet. environments. Opti-Core Fibre Optic Patch Cords www.panduit.com Opti-Core Fibre Optic Patch Cords (LSZH) Fibre Optic Patch Cord Detail 4 5 2 3 7 Patch cord length in metres Part Number Configurator F XL E 10 10 M 5 Y Example: 12 3 4 5 6 7 8 FXLE10-10M5 = Opti-Core 10Gig LC to LC Duplex Fibre Optic Patch Cord, OM3/OM4 10Gig 50/125m multimode low smoke zero halogen rated cable, LC duplex connectors on each end, and 5m in length. 2 Fibre Type and Jacket Flame Rating 4 and 5 Connector Styles Low Smoke Zero Halogen (LSZH) rated cable: Select one style for each end, listing lower number ZL = OM4 10Gig 50/125m first, or 6P first. ZOL = Optimized OM4 10Gig 50/125m 2 = ST, 3 = SC, 6P = FJ Plug, 10 = LC, XL = OM3 10Gig 50/125m 12 = MT-RJ or 16 = E-2000 XOL = Optimized OM3 10Gig 50/125m 6 Unit of Measure (M = Metres) 5L = OM2 50/125m, 7 Length 6L = OM1 62.5/125m, or Patch Cords: 1-10, 15, 20, 25 and 30 metre lengths. 9L = OS1 9/125m Pigtails: 1, 2, and 3 metre lengths. 3 Cable Type 8 RoHS Compliance D = 3mm duplex zipcord jacketed cable All patch cords and pigtails are RoHS compliant. S = 3mm simplex jacketed cable E = 1.6mm duplex zipcord jacketed cable F = 1.6mm simplex jacketed cable Z = 1.8mm duplex zipcord jacketed cable Note: Not all cable types and connector combinations are available. Contact customer service for availability and other lengths. Substitute for fibre type: Z = OM4 10Gig 50/125m, X(OM3 10Gig 50/125m), 5(OM2 50/125m), 6(OM1 62.5/125m) and 9(OS1/OS2 9/125m). *MTP is a registered trademark of US Conec Ltd. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2011 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: WW-FBSP34-GB cs-emea panduit.com 10/2011