PanMPO and MPO Round Harness Cable Assemblies SPECIFICA TION SHEET technical information PanMPO and MPO Round Harness Cable Assemblies are pre-terminated 8 or 12-fiber cable assemblies. The unique design of the PanMPO Connector allows for rapid gender and polarity change in the field and enables a seamless, standards-compliant migration from duplex based applications (e.g. 10G Ethernet) to parallel optics based applications (e.g. 40/100G Ethernet). LC push-pull connectors reduce cable density by 40% and allow easy removal in high density installation. All cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity. application Connect multiple MPO-based infrastructure components to LC-based components, such as LAN switches, servers, patch panels, and zone distribution areas. Eight fiber, 4-to-1 conversion harnesses connect four 10G LCs to a single 40G MPO. 12-fiber breakout harnesses connect (6) LCs to (1) MPO using traditional fanout wiring. construction physical properties Cable type: 3.0mm round indoor Cable outside diameter (OD): 3.0mm Minimum bend radius: 30mm Cable Optical Fiber Nonconductive jacket ratings: Plenum (OFNP) Flex: 100 cycles at 4.9N Low Smoke Zero Halogen (LSZH) Twist: 10 cycles 15N Fiber types: OS2 OM3 Cable retention strength: 50N OM4 Connector durability: 500 mating cycles* Connector MPO female (Singlemode) types end A: MPO male (Singlemode) PanMPO female (Multimode) PanMPO male (Multimode) Fiber count: 8 = 8-fiber 12 = 12-fiber Jacket color: OS2: Yellow OM3: Aqua OM4: Aqua Connector LC Connector (Push-Pull) types end B: LC Duplex Connector environmental properties optical properties Operating temperature: 0C to 60C Maximum cable Multimode: 3.5dB/km at 850nm, attenuation: 1.5dB/km at 1300nm Storage and shipping -40C to 70C Maximum connector Standard MPO: 0.50dB temperature: insertion loss: Optimized MPO: 0.35dB Installation temperature: 0C to 60C Standard LC: 0.25dB Optimized LC: 0.15dB Minimum Singlemode: 55dB minimum connector Multimode: 26dB minimum standards Return Loss: Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-604-10 (FOCIS-10), TIA/EIA-568-C.1 RoHS Compliant *With proper cleaning and inspection www.panduit.com PanMPO and MPO Round Harness Cable Assemblies part number Example: FZTRP8QQSSNF003 = Fiber OM4, 12-fiber, round, plenum rated, PanMPO male to LC duplex LC harness with 61cm equal breakout, standard IL, no pulling eye, 3 feet CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXAMPLE F Z T R P 8 N Q S S N F 0 0 3 1 Fiber Product 6 Connector Type End A Q = Standard IL / 4-to-1 Conversion (Singlemode) 5 = Singlemode MPO Female F = Fiber V = Optimized IL / 4-to-1 Conversion 6 = Singlemode MPO Male 2 Fiber Type (Multimode 7 = Mulitmode PanMPO Female 9 = Singlemode N = Ultra Low IL/Standard Fanout X = OM3 8 = Multimode PanMPO Male (OM4 Only) 7 Connector Variant Z = OM4 11 Other N = No variant 3 Fiber Count N = No variant T = 12-fiber 8 Connector Type End B 12 Unit of Length Q = Push/Pull Duplex LC 8 = 8-fiber M = Meters L = LC Duplex 4 Cable Type F = Feet 9 Connector Variant R = Round 13, 14, 15 Length S = 24-inch (61 cm) 5 Jacket Type Meters: 001 to 010, 1.5, 2.5, 3.5, 4.5 10 Performance/Construction L = Low Smoke Zero Halogen Feet: 003 to 030 S = Standard IL / Standard Fanout (LSZH) (Singlemode) P = Optical Fiber Nonconductive O = Optimized IL / Standard Fanout Plenum (OFNP) (Multimode) harness assembly detail Key Up Key Up LC Duplex Connector Male Female 8 Fiber Harness 8 Fiber Standard Harness 8 Fiber 4 to 1 Conversion Harness www.panduit.com