FZ2ERLNSNONF009 Panduit

PRINTED CABLE 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES: 1. CABLE ASSEMBLY (WITH CONNECTORS): A. SEE SHEET 2 FOR PART NUMBER MATRIX. B. CANNOT BE LESS THAN THE LENGTH SPECIFIED IN THE PART NUMBER. FIBER OPTIC CONNECTOR TYPES C. THE MAXIMUM CABLE LENGTH IS NOT TO EXCEED 10cm (4 ) OVER (POSITIONS 9 AND 11 OF PART NUMBER) SPECIFIED LENGTH FOR LESS THAN 10 METER AND +1%/-0% GREATER THAN 10 METERS. D. TIP TO TIP LENGTH IS MEASURED WITHOUT DUST CAPS INSTALLED. E. PATCHCORD ROUTING CONFIGURATION IS TO. F. THIS DRAWING SHALL BE APPLICABLE TO ANY LENGTH PATCHCORD AS DESIGNATED BY THE PART NUMBER, WHERE M=METER. 2. TECHNICAL SPECIFICATIONS: A. OPERATING TEMPERATURE RANGE IS FROM -10 C TO +60 C. B. CONNECTORS ARE FOCIS COMPLIANT. C. CABLE ASSEMBLIES COMPLY WITH THE REQUIREMENTS OF TIA/EIA-568-C.3 OR EQUIVALENT IEC STANDARDS. PUSH PULL DUPLEX LC DUPLEX LC DUPLEX SC D. ALL MATERIALS AND COMPONENTS USED MUST MEET THE MATERIAL (TYPE Q) (TYPE L) (TYPE S) RESTRICTIONS OF RoHS, (EUROPEAN DIRECTIVE 2011/65/EC ON THE RESTRICTION OF HAZARDOUS SUBSTANCES) AS PROPOSED BY THE RoHS TECHNICAL ADAPTATION COMMITTEE. 3. PACKAGING: A. CABLE ASSEMBLY SHIPPED WITH DUST CAPS INSTALLED. B B. UNIT QUANTITY: 1 PATCHCORD/PIGTAIL PER BAG. B CONNECTOR INSERTION/RETURN LOSS SPECIFICATIONS MINIMUM RETURN LOSS MAXIMUM INSERTION LOSS (PER CONNECTOR) (PER CONNECTOR) CONNECTOR TYPE OPTIMIZED STANDARD ULTRA-LOW SM (UPC) MM (PC) SM (UPC) MM (PC) MM (PC) (OM4 & OM4+) DUPLEX LC 0.35dB 55dB 26dB 0.25dB 0.15dB 0.10dB 0.50dB DUPLEX SC 0.25dB 0.15dB 55dB 26dB 0.10dB 0.35dB PUSH-PULL LC 0.15dB 55dB 26dB 0.25dB 0.10dB A A TITLE JACKETED DUPLEX FIBER PATCH CORDS CUSTOMER DRAWING ITEM REVISION NAME M02779DX/00 DATASET FILE NAME M02779DX DC/00B MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN mm .X .XXX .03 .762 .005 .127 B. ADDED (T)STD IL PAIR FLIPPED & (P)OPT IL PAIR FLIPPED. 01 07-06-16 SAT RWD MMN M02779DX-DC A. ADDED (R)RISER AND (L)LSZH TO 5th POSITIONXX ANGLES .01 .25 1 DRAWING NUMBER: THIRD ANGLE 00 01-06-16 SAT RWB RWB RELEASED TO PRODUCTION M02779DX-DC PROJECTION M02779DX-DC SIZE DRAWN BY DATE CHK SCALE REV DATE BY CHK APR DESCRIPTION ECN SAT 01-04-16 RWB NONE SHT 1 OF 2 B 2 1 PRINTED CABLE2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PANDUIT JACKETED FIBER PATCH CORD MASTER OPTIONS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 F 1st POSITION - FIBER PRODUCT F - FIBER 2nd POSITION - FIBER TYPE 9 - SINGLEMODE S - SIG-CORE (OM4+) X - OM3 Z - 0M4 3rd POSITION - FIBER COUNT B B 2 - 2 FIBER 4th POSITION - CABLE TYPE E - 1.6mm DUPLEX 3 - 3mm DUPLEX (SC-SC ONLY) 5th POSITION - JACKET TYPE P - PLENUM 6th POSITIONS - CONNECTOR (END A) R - RISER L - LSZH Q - PUSH PULL DUPLEX LC L - LC DUPLEX S - SC DUPLEX 7th POSITIONS - CONNECTOR VARIANT 1 - PUSH PULL DUPLEX LC 8th POSITION - CONNECTOR (END B) N - NO VARIANT Q - PUSH PULL DUPLEX LC L - LC DUPLEX S - SC DUPLEX 9th POSITIONS - CONNECTOR VARIANT 1 - PUSH PULL DUPLEX LC 10th POSITION - PERFORMANCE/POLARITY N - NO VARIANT S - STANDARD IL T - STANDARD IL PAIR FLIPPED O - OPTIMIZED IL P - OPTIMIZED IL PAIR FLIPPED N - ULTRA LOW IL (OM4 & OM4+ ONLY) 11th POSITION - PULLING EYE N - NO PULLING EYE 12th POSITION - UNIT OF MEASURE F - FEET M - METERS 13th, 14th, AND 15th POSITIONS - ASSEMBLY LENGTH F - 001-050 FEET M - 001-050 METERS A A TITLE JACKETED DUPLEX FIBER PATCH CORDS CUSTOMER DRAWING ITEM REVISION NAME M02779DX/00 DATASET FILE NAME M02779DX DC/00B MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN mm .X .XXX .03 .762 .005 .127 .XX ANGLES .01 .25 1 DRAWING NUMBER: THIRD ANGLE 01 07-06-16 SAT RWB MMN SEE SHEET 1 FOR REVISION HISTORY. M02779DX-DC PROJECTION M02779DX-DC SIZE DRAWN BY DATE CHK SCALE REV DATE BY CHK APR DESCRIPTION ECN SAT 01-04-16 RWB NONE SHT 2 OF 2 B 2 1