PanMPO and MPO Round Harness Cable Assemblies SPECIFIC A TION SHEE T technical information PanMPO and MPO Round Harness Cable Assemblies are pre-terminated 8 or 12-fiber cable assemblies. The unique design of the PanMPO Connector allows for rapid gender and polarity change in the field and enables a seamless, standards-compliant migration from duplex based applications (e.g. 10G Ethernet) to parallel optics based applications (e.g. 40/100G Ethernet). LC push-pull connectors reduce cable density by 40% and allow easy removal in high density installation. All cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity. applica tion Connect multiple MPO-based infrastructure components to LC-based components, such as LAN switches, servers, patch panels, and zone distribution areas. Eight fiber, 4-to-1 conversion harnesses connect four 10G LCs to a single 40G MPO. 12-fiber breakout harnesses connect (6) LCs to (1) MPO using traditional fanout wiring. c onstruc tion physical proper ties Cable type: Cable outside diameter (OD): 3.0mm round indoor 3.0mm Cable Minimum bend radius: Optical Fiber Nonconductive 30mm jacket ratings: Plenum (OFNP) Flex: 100 cycles at 4.9N Low Smoke Zero Halogen (LSZH) Twist: 10 cycles 15N Fiber types: OS2 OM3 Cable retention strength: 50N OM4 Connector durability: 500 mating cycles* Connector MPO female (Singlemode) types end A: MPO male (Singlemode) PanMPO female (Multimode) PanMPO male (Multimode) Fiber count: 8 = 8-fiber 12 = 12-fiber Jacket color: OS2: Yellow OM3: Aqua OM4: Aqua Connector LC Connector (Push-Pull) types end B: optical proper ties environmental proper ties Maximum cable Operating temperature: Multimode: 3.5dB/km at 850nm, 0C to 60C attenuation: 1.5dB/km at 1300nm Storage and shipping -40C to 70C Maximum connector temperature: Standard MPO: 0.50dB insertion loss: Optimized MPO: 0.35dB Installation temperature: 0C to 60C Standard LC: 0.25dB Optimized LC: 0.15dB Minimum Singlemode: 55dB minimum connector Multimode: 26dB minimum standar ds Return Loss: Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-604-10 (FOCIS-10), TIA/EIA-568-C.1 RoHS Compliant *With proper cleaning and inspection www.panduit.com PanMPO and MPO Round Harness Cable Assemblies par t number Example: FZTRP8QQSSNF003 = Fiber OM4, 12-fiber, round, plenum rated, PanMPO male to LC duplex LC harness with 61cm equal break - out, standard IL, no pulling eye, 3 feet CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXAMPLE F Z T R P 8 N Q S S N F 0 0 3 1 Fiber Product Q = Standard IL / 4-to-1 Conversion (Singlemode) 6 Connector Type End A F = Fiber V = Optimized IL / 4-to-1 Conversion 5 = Singlemode MPO Female 2 Fiber Type (Multimode 6 = Singlemode MPO Male 9 = Singlemode N = Ultra Low IL/Standard Fanout 7 = Mulitmode PanMPO Female X = OM3 ( OM4 Only) 8 = Multimode PanMPO Male Z = OM4 11 Other 7 Connector Variant 3 Fiber Count N = No variant N = No variant T = 12-fiber 12 Unit of Length 8 Connector Type End B 8 = 8-fiber M = Meters Q = Push/Pull Duplex LC 4 Cable Type F = Feet 9 Connector Variant R = Round 13, 14, 15 Length S = 24-inch (61 cm) 5 Jacket Type Meters: 001 to 010, 1.5, 2.5, 3.5, 4.5 10 Performance/Construction L = Low Smoke Zero Halogen Feet: 003 to 030 (LSZH) S = Standard IL / Standard Fanout (Singlemode) P = Optical Fiber Nonconductive O = Optimized IL / Standard Fanout Plenum (OFNP) (Multimode) harness assembly detail Key Up Key Up LC Duplex Connector Male Female 8 Fiber Harness 8 Fiber Standard Harness 8 Fiber 4 to 1 Conversion Harness www.panduit.com