2x2 and 4x4 Fiber-Duct Routing System
Speci F ica tion SH eet
specifications
Channel and Cover
The 2x2 and 4x4 routing systems shall be used to route, segregate, and protect
fiber optic and communication cabling. The solid wall routing systems should be
2x2 solid wall channel (6'): S2X2**6NM
UL Listed as an optical fiber channel for general purpose use. They shall be 4x4 solid wall channel (6'): S4X4**6NM
2x2 slotted wall channel (6'): E2X2**6
compliant with UL 2024A and NEC articles 770 and 800 when installed per
4x4 slotted wall channel (6'): E4X4**6
instructions. The slotted wall channel and cover shall be UL Recognized. A
2x2 cover (6'): C2**6
full complement of fittings with a 2" minimum bend radius, snap-on covers, and
4x4 cover (6'): C4**6
mounting brackets shall be available. Channel and fittings shall be manufactured
Fittings and Spillouts
from impact-resistant and flame retardant (V-0) materials. Channel shall have
non-slip snap-on covers that can be easily removed to allow access for moves, 2x2 coupler: FCF2X2**
4x4 coupler: FCF4X4**
adds, and changes. Channel and fittings finish shall be pure color, resist
2x2 horizontal right angle: FRA2X2**
scratches, dents, and not peel or corrode. Available system colors shall be
4x4 horizontal right angle: FRA4X4**
yellow, orange, black, and light gray. A full complement of brackets shall be
2x2 horizontal tee: FT2X2**
available for attaching system components to ladder rack, threaded rod,
4x4 horizontal tee: FT4X4**
auxiliary framing, equipment racks, and raise floor pedestals.
2x2 4-way cross: FFWC2X2**
4x4 4-way cross: FFWC4X4**
technical information
2x2 end cap: FEC2X2**
4x4 end cap: FEC4X4**
2.25"
4.25"
2x2 inside vertical 45: FIV452X2**
(57.1mm) (107.9mm)
4x4 inside vertical 45: FIV454X4**
2x2 outside vertical 45: FOV452X2**
4x4 outside vertical 45: FOV454X4**
2x2 inside vertical
2.25" 4.10" right angle: FIVRA2X2**
2
A = 4.0 in.
(57.1mm) (104.1mm) 4x4 inside vertical
(2580mm2)
right angle: FIVRA4X4**
2x2 outside vertical
right angle: FOVRA2X2**
Dimensions are in inches (Dimensions in parentheses are metric).
4x4 outside vertical
right angle: FOVRA4X4**
Open channel 50% fill capacity (2" pile up): Cable No. of Cables
4x4 to 2x2
2x2 Fiber-Duct System 1.6mm 562
Reducer: FRF42**
Fiber-Duct
2.0mm 359
2x2 bend radius
3.0mm 160
control trumpet: TRC2BL
Fiber Optic Ribbon Interconnect 5.20mm 53
4x4 bend radius
Category 6, 6.1mm 39
control trumpet: TRC4BL
Augmented Category 6, 7.6mm 25 4x4 innerduct transition: FITF4X4B
4x4 adapter to TE 4x4
FiberGuide*: FADC4X4
Open channel 50% fill capacity (4" pile up):
4x4 adapter to various
4x4 Fiber-Duct System 1.6mm 2343
4x4 systems: FTDNS4X4**
2.0mm 1499
2x2 plastic snap rivet: NR2WH
3.0mm
666
4x4 plastic snap rivet: NR4BL
Fiber Optic Ribbon Interconnect 5.20mm 221
Plastic bolts and wing nuts: F14PWN
Category 6, 6.1mm 161 Plastic bolts and hex nuts: F14PN
Augmented Category 6, 7.6mm 103 2x2 vertical tee: FVTHD2X2**
4x4 vertical tee: FVT4X4**
1-port spillout to 1.5" I.D.
Material: Rigid PVC (channel), ABS (fittings)
corrugated tubing: FIDT2X2**
Flammability: 94V-0 2-port spillout to 1.5" I.D.
corrugated tubing: FIDT4X4BL
Approvals: UL Listed to 2024A Optical Fiber Cable Routing
3-sided vertical tee
Assemblies UL Recognized (File No. E147128) slotted trumpet spillout: FTR4X4**
3-sided BRC trumpet
wall CSA Certified (File No. 016446 0 000) slotted wall
spillout for 2x2 exit: FTR2X2**
CSI spec form: LP-CSISPEC-FD-1
Mounting Brackets
Existing 1/2" thr rod brkt: FTRBE12
Existing 5/8" thr rod brkt: FTRBE58
key features and benefits
New 1/2" thr rod brkt: FTRBN12
New 5/8" thr rod brkt: FTRBN58
Large capacity 2"x 2" Ideal for routing, segregating, and protecting large amounts of fiber
Under-floor brkt: FUSB
and 4" x 4" sizes cabling; provides a more secure installation for fiber or high performance
Ladder rack brkt: FLRB
copper cabling wall mount brkt: FLB
Adjustable bracket: FZBA1.5X4
Minimum 2" bend radius Bend radius control in fittings helps prevent excessive bends in fiber optic
Low profile bracket: FZBLP
control fittings and high performance copper cabling
EIA/TIA threaded rod
mounting bracket: FEIAB58
Snap-on covers Covers snap on or off channel and fittings to enclose or gain access to
Two-piece ladder
system; fully encloses the channel to provide protection per UL 2024A;
rack 1/2" thr rod: F2PCLB12
provides quick and easy access for moves, adds, and changes
Two-piece ladder
rack 5/8" thr rod: F2PCLB58
Mates to Panduit cable Provides methods to mate system to equipment mounted on standard EIA
Two-piece framing clip 5/8"
management rack panels 19" or 23" equipment racks and vertical cable managers
hr rod to 9/16" C-channel
aux. framing bars: FRAFC58
applications *TE 4x4 FiberGuide Management Systems
is a registered trademark of TE Connectivity.
**Substitute:YL = Yellow, OR = Orange,
The Fiber-Duct 2x2 and 4x4 Routing Systems are protect against signal loss due to excessive cable
BL = Black, and LG = Light Gray.
comprised of channel, fittings, and brackets designed bends. Available system colors are yellow, orange,
to segregate, route, and protect fiber optic cable black, and light gray to differentiate various types of
and copper cabling. It is suited for data center cabling. A full complement of brackets is available to
applications where cable is routed from distribution attach system components to support structures
areas to equipment cabinets or racks. It is used in found in all applications. The Fiber-Duct 2x2 and
Telco Central Offices to route fiber optic jumper 4x4 Routing Systems are part of the Panduit
cables between fiber distribution frames and complete fiber distribution system, which includes
equipment bays. It can be deployed over the the FiberRunner 24x4, 12x4, 6x4, 4x4, and 2x2
racks or in approved under floor applications. Routing Systems, cable management, and racks.
Fittings maintain a minimum 2" bend radius to
www.panduit.com
2x2 and 4x4 Fiber-Duct Routing System
channel and cover
S2X2**6nM e2X2**6 c2**6
S4X4**6nM e4X4**6 c4**6
Fittings and Spillouts
FcF2X2** FRa2X2** Ft2X2** FFWc2X2** Fec2X2** FiV452X2** FoV452X2** FiVRa2X2**
FcF4X4** FRa4X4** Ft4X4** FFWc4X4** Fec4X4** FiV454X4** FoV454X4** FiVRa4X4**
FoVRa2X2** FRF42** tRc2BL tRc4BL FitF4X4B FaDc4X4 FtDnS4X4** nR2WH
FoVRa4X4** nR4BL
F14pWn F14pn FVtHD2X2** FVt4X4* FiDt2X2** FiDt4X4BL FtR4X4** FtR2X2**
Mounting Brackets
FtRBe12 FtRBn12 FUSB FLRB FLB FZBa1.5X4 FZBLp
FRaFc58
FtRBe58 FtRBn58
FeiaB58 F2pcLB12
F2pcLB58
**Substitute: YL = Yellow, OR = Orange, BL = Black, and LG = Light Gray.
WOrldWide sUBsidiAries ANd sAles OFFiCes
PANdUit CANAdA PANdUit eUrOPe ltd. PANdUit siNgAPOre Pte. ltd. PANdUit JAPAN PANdUit lA tiN AMeriCA PANdUit AUstrAliA PtY. ltd.
Markham, Ontario london, UK republic of singapore t okyo, Japan guadalajara, Mexico ictoria, Australiav
cs-cdn@panduit.com cs-emea@panduit.com cs-ap@panduit.com cs-japan@panduit.com cs-la@panduit.com cs-aus@panduit.com
Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
2014 Panduit Corp.
All rights reserved.
Visit us at www.panduit.com
FRSp14--WW-enG
contact customer Service by email: cs@panduit.com replaces WW-FrsP07
1/2014
or by phone: 800.777.3300