Thick Wall Polyolefin Heat Shrink Tubing S P ecifica T ion SH ee T specifications 3:1 Heat Shrink Tubing Thick Wall Polyolefin Heat Shrink with a 3:1 ratio shall Thick Wall Polyolefin be used to insulate, seal and protect electrical splices 0.40 expanded dia.: HST0.4* and terminations where maximum flame retardancy 0.75 expanded dia.: HST0.8* and exceptional insulating and sealing characteristics 1.10 expanded dia.: HST1.1* are required. The adhesive-lined inner wall shall seal 1.50 expanded dia.: HST1.5* and protect against moisture. The heat shrink tube 2.00 expanded dia.: HST2.0* shall be suitable for direct burial according to UL 486D 2.70 expanded dia.: HST2.7* and UL Recognized for sunlight (UV) resistance and 3.00 expanded dia.: HST3.0* VW-1 flame rating for outdoor applications such as 3.50 expanded dia.: HST3.5* solar and wind. The thick wall tube shall be CSA Related products certified and RoHS compliant. Adhesive-Lined technical information Heat Shrink End Caps Material: Irradiated cross-linked polyolefin outer wall with an inner wall of hot melt adhesive 0.47 expanded dia.: HSEC0.5-X 0.79 expanded dia.: HSEC0.8-X UL listed: * File number E173379 SEALED WIRE CONNECTOR SYSTEM 1.15 expanded dia.: HSEC1.0-X 1.58 expanded dia.: HSEC1.5-5 UL recognized: * File number E342365 VW-1 and SUNLIGHT RESISTANT 2.25 expanded dia.: HSEC2.0-5 (Black only) 3.92 expanded dia.: HSEC4.0-2 CSA certified: * File number 244528 Flame Retardant Adhesive-Lined MIL spec: SAE-AMS-DTL-23053/15 Class 1 Heat Shrink End Caps Flammability: Flame retardant meets UL 224 VW-1 0.51 expanded dia.: HSECFR0.5-XY 0.75 expanded dia.: HSECFR0.8-XY Color: Black and Red 1.10 expanded dia.: HSECFR1.0-XY Shrink ratio: 3:1 1.50 expanded dia.: HSECFR1.5-5Y 2.00 expanded dia.: HSECFR2.0-5Y Voltage rating: UL 486D Listed for 600V 90C continuous use Additionally tested for 1 kV withstand Heat Gun and Accessories Continuous operating -67F to 230F (-55C to 110C) Heat Gun: HSG-115V-650 temperature: Shrink tube reflector for tubing up to: HSG-A1 Shrink temperature: 248F (120C) Shrink tube reflector Water absorption: 0.5% MAX. per ASTM D570 for tubing up to 1 : HSG-A2 Dielectric strength: 7.9 kV/mm minimum per ASTM D2671 *Additional sizes or colors are available. See following Environmental Compliant per European Directive 2002/95/EC on the Restriction of page for complete part number information. compliance: Hazardous Substances (RoHS) Shelf life: 10 years * = (except HST3.0 and HST3.5 sizes) key features and benefits Wet applications: High impact and abrasion resistance Suitable for outdoor, direct sunlight and direct burial applications Resistant to splitting or rupture during installation Variety of diameters: Allows optimal sizing for application requirements to provide a lower installed cost and the flexibility to protect different size electrical and electronic components, cables, terminals and connectors Convenient Available in boxes that include 4 lengths to help maintain a manageable packaging: and organized inventory A variety of shorter lengths are also available Quality material: Suitable for use in 600 V applications to comply with UL standards applications Approved by UL for outdoor, direct sunlight shrink the tube. Minimum recommended shrink applications as well as submersible and direct burial temperature is 248F (120C). Continually move the installations, providing excellent cable protection heat source around the diameter of the tube, which with an operating temperature up to 230F (110C) will cause the product to recover. The Panduit with VW-1 flame rating. Ideal for outdoor alternative heat gun is designed for indoor use only, and the energy applications, such as, wind and solar. A recovery rate will be slower than using a torch. broad soft flame torch or hot air gun can be used to Do not scorch the tube. www.panduit.comThick Wall Polyolefin Heat Shrink Tubing Sizes and Dimensions Min. Max. Nominal Recovered Expanded I.D. Recovered I.D. Wall Thickness Length In. mm In. mm In. mm In. mm Part Number Color HST0.4-3-Q2Y Red 3.0 76.2 HST0.4-3-QY Black HST0.4-6-3Y Black 0.40 10.2 0.16 4.1 0.08 2.0 6.0 152.4 HST0.4-6-X2Y Red HST0.4-6-XY Black HST0.4-48-5-2Y Red 48.0 1219.2 HST0.4-48-5Y Black HST0.8-6-3Y Black 6.0 152.4 HST0.8-6-X2Y Red HST0.8-6-XY Black HST0.8-9-X2Y Red 9.0 228.6 0.75 19.1 0.22 5.6 0.09 2.3 HST0.8-9-XY Black HST0.8-12-5-2Y Red 12.0 304.8 HST0.8-12-5Y Black HST0.8-48-5-2Y Red 48.0 1219.2 HST0.8-48-5Y Black HST1.1-6-3Y Black 6.0 152.4 HST1.1-6-X2Y Red HST1.1-6-XY Black HST1.1-9-2Y Black 1.10 27.9 0.39 9.5 0.12 3.0 HST1.1-9-X2Y Red 9.0 228.6 HST1.1-9-XY Black HST1.1-12-5-2Y Red 12.0 304.8 HST1.1-12-5Y Black HST1.1-48-5-2Y Red 48.0 1219.2 HST1.1-48-5Y Black HST1.5-9-XY Black 9.0 228.6 HST1.5-12-1Y Black 12.0 304.8 HST1.5-12-5Y Black 1.50 38.1 0.50 12.7 0.16 4.1 HST1.5-48-5-2Y Red 48.0 1219.2 HST1.5-48-5Y Black HST2.0-9-5Y Black 9.0 228.6 HST2.0-12-2Y Black 2.00 50.8 0.67 16.9 0.16 4.1 12.0 304.8 HST2.0-48-2Y Black 48.0 1219.2 HST2.7-12-2Y Black 12.0 304.8 2.70 68.6 0.87 22.1 0.16 4.1 HST2.7-48-2Y Black 48.0 1219.2 HST3.0-12-2 Black 12.0 304.8 3.00 76.2 1.00 25.4 0.16 4.1 HST3.0-48-2 Black 48.0 1219.2 HST3.5-12-2Y Black 12.0 304.8 3.50 88.9 1.20 30.5 0.16 4.1 HST3.5-48-2Y Black 48.0 1219.2 applications Generally, the largest tube that shrinks down tightly onto an object should be chosen. Expanded Recovered This will provide a heat shrink with maximum wall thickness and maximum stress relief I.D. I.D. that will yield the largest service life. Part Number In. (mm) In. (mm) Example: HST0.8-48-5Y 0.75 0.22 (19.1) (5.6) A multi-conductor cable needs to be covered with HST thick wall heat shrink tubing. The area to be covered has a measured outside diameter of 0.650 (16.5mm). Based on HST1.1-48-5Y 1.10 0.38 expanded and recovered ID attributes, the first three part numbers are possible options: (27.9) (9.5) HST2.0-48-2Y will not work because its recovered I.D. is greater than 0.650 (16.5mm). HST1.5-48-5Y 1.50 0.50 The optimal choice is HST1.5-48-5Y since the tube will recover to less than 0.650 (38.1) (12.7) (16.5mm) and it has the largest expanded I.D. while the HST0.8-48-5Y and HST2.0-48-2Y 2.00 0.67 HST1.1-48-5Y will fit over the 0.650 (16.5mm) outside diameter, the recovered wall (50.8) (16.9) would be thinner and not provide as much protection. WOrldWide sUBsidiAries ANd sAles OFFiCes PANdUit CANAdA PANdUit eUrOPe ltd . PANdUit siNgAPOre Pte. ltd . PANdUit JAPAN PANdUit lA tiN AMeriCA PANdUit AUstrAliA PtY. ltd . Markham, Ontario london, UK republic of singapore t okyo, Japan guadalajara, Mexico victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty for more information 2013 Panduit Corp. All rights reserved. Visit us at www.panduit.com HSSP02--WW-enG contact customer Service by email: cs panduit.com replaces WW-hssP01 1/2013 or by phone: 800.777.3300