IndustrialNet Category 6 Solid Conductor F/UTP Copper Cable SPECIFICATION SHEET specifications Category 6 4-pair F/UTP copper cable shall meet or exceed the IndustrialNet Category 6 F/UTP ANSI/TIA-568-C.2 Category 6 and ODVA EtherNet/IP standards. The solid Copper Cable copper conductors shall be 23 AWG with high density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and wrapped with CMX Outdoor/CMR a foam polypropylene tape to form a core. All pairs shall then be covered 4-pair, Black: IFRH6C04BL-UG with an industrially rated black PVC jacket which shall be oil and sunlight CMX Outdoor/CMR resistant and flame retardant to CMX Outdoor/CMR for industrial Ethernet 4-pair, Red: IFRH6C04RD-UG applications. This cable shall be rated for panel or on-machine applications IndustrialNet Category 6A/6/5e where space is shared with 600V high voltage cables. RJ45 Field Terminable Plug Field technical information terminable plug: ISPS688FA Category 6 component Meets or exceeds the requirements of ANSI/TIA-568-C.2 IndustrialNet M12X-Code performance up to 100 meters: Category 6 at swept frequencies up to 250 MHz Field Terminable Plug Electrical performance: Conforms to ODVA EtherNet/IP performance requirements Field Standard compliances: UL AWM Style 21047 (75C 600V), Oil Res and Sun Res, terminable plug: ISPS6A88MFA UL 444 Sun Res, UL 1666 CMR IndustrialNet Category 5e Shielded RoHS compliance: Compliant (EU DIRECTIVE 2011/65/EU) 600V Rated Patch Cords Conductors/insulators: Four pairs of 23 AWG solid copper insulated with high density CM/CMX: ISTPHCH1MTL* polyethylene (HDPE) insulation IndustrialNet M12 D-Code to Insulation diameter: 1.02 - 1.27mm (0.040 - 0.050 in) RJ45 Panel Mount Adapter Flame rating: CMX Outdoor/CMR Panel Installation tension: 110 N (25 lbf) maximum mount adapter: ICAM12DRJS Temperature rating: -20C to 75C (-4F to 167F) during transport, installation IndustrialNet DIN Rail Mount -40C to 75C (-40F to 167F) operation temperature Patch Panel Cable jacket: Oil and sunlight resistant PVC 8-port: CDPP8RG Cable diameter: 8.1 - 8.7mm (0.317 - 0.343 in) Mini-Com DIN Rail Mount Adapter Cable weight: 15kg/305m (34 lbs./1000 ft.) 1-port: CADIN1IW** Packaging: Packaged 305 meters (1000 feet) on a reel Package tested to ISTA Procedure 1A *For other lengths, change the length designation (1M) of the part number to the desired length (0.3M, 0.6M, 2M, 3M, 5M, or 10M) to designate color, replace TL (Teal) suffix with BL (Black), RD (Red), BU (Blue), GY (Gray), or YL (Yellow). For example, the key features and benefits part number for a 2-meter teal patch cord is ISTPHCH2MTL. Oil and sunlight performance Delivers enhanced chemical resistance and mechanical rated cable jacket: performance **For standard colors other than Off White, replace IW in part number with BL (Black), EtherNet/IP compliant design: Provides performance levels required to support industrial EI (Electric Ivory), IG (International Gray), or network applications WH (White). 600V rated jacket: Approved for control panel or on-machine applications when the EtherNet/IP is a trademark of ODVA. space is shared with 600V high voltage power cables, required for UL 508A applications IndustrialNet Category 6 Solid Conductor F/UTP shared with 600V high voltage power cables, Copper Cable provides reliability and high IndustrialNet Category 6 Solid Conductor performance as an integral component of the F/UTP Copper Cable is ideal for control panel end-to-end solution for industrial Ethernet based deployments featuring power source voltages. communications networks. The cable with oil and Cable is suitable for transmission of high UV resistant PVC jacket withstands harsh performance 10BASE-T, 100BASE-T and industrial conditions such as oil rigs and other 1000BASE-T uplinks featuring up to gigabit hazardous environments. Rated for panel or data transmission from the control panel to on-machine applications when the space is the consolidation point. www.panduit.com/ia IndustrialNet Category 6 Solid Conductor F/UTP Copper Cable additional specifications Mechanical Test Maximum Pulling Force 178N (40 lbf.) Minimum Bend Radius 64mm (2.5in.) Electrical Test Nominal Velocity of Propagation (NVP) 70% 80V Operating Voltage, Maximum IFRH6C04BL Cable Cross-Section Conductor Wire Conductor Insulator Barrier Layer Pair Separator Foil Shield Earth Wire Outer Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2018 Panduit Corp. Visit us at www.panduit.com/ia ALL RIGHTS RESERVED. iai panduit.com COSP437--WW-ENG 6/2018